Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = 3.25 m/s²s = 1700 m

A plane starts from rest and accelerates uniformly at 3.25 m/s² along a runway. Find its speed v after 1700 m.

v₀ = 0a = 3.25 m/s²s = 1700 m
v = m/s
2.KinematicsHard
a = 38 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 38 m/s² for 1 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 38 m/s²t1 = 1 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
5.5 kg0.5 kg

Masses of 5.5 kg and 0.5 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 5.5 kgm2 = 0.5 kgg = 9.81 m/s²
T = N
4.Newton’s lawsHard
θ = 20°blockv₀ = 7.5 m/s

A block is given a push so that it starts sliding up a ramp at 20° with a speed of 7.5 m/s. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 7.5 m/sθ = 20°μ = 0.25g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 24 m/s45°range

A ball is launched at 45° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 24 m/sθ = 45°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 60 mv0​ = 19 m/s20°H = ?

A ball is launched at 19 m/s and 20° above the horizontal from the top of a 60 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 19 m/sθ = 20°h = 60 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 115 mvmax​ = ?

A car takes a flat curve of radius 115 m. The coefficient of static friction between tyres and road is 0.8. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 115 mμs = 0.8g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
θ = 8°to centrevmax​ = ?

A curve of radius 140 m is banked at 8°, and the coefficient of static friction between tyres and road is 0.1. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.

r = 140 mθ = 8°μs = 0.1g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
40°L = 0.8 m1 kg

A 1 kg ball hangs on a light string of length 0.8 m. It is pulled aside until the string makes 40° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.

m = 1 kgL = 0.8 mθ = 40°g = 9.81 m/s²
T = N
10.Work & energyHard
h = 3.5 mL = 1.5 mμ = 0.3k = 1000 N/m

A 4 kg block is released from rest at height 3.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.3) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 4 kgh = 3.5 mL = 1.5 mμ = 0.3k = 1000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
4.5 kg2 m/s5 kg

A 4.5 kg glider moving at 2 m/s makes a perfectly elastic head-on collision with a 5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 4.5 kgm2 = 5 kgv1 = 2 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
1200 kg14 m/s1400 kg24 m/sv′ = ?

At a crossing a 1200 kg car travelling east at 14 m/s collides with a 1400 kg car travelling north at 24 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.

m1 = 1200 kgv1 = 14 m/s (E)m2 = 1400 kgv2 = 24 m/s (N)
v′ = m/s
13.Rigid-body rotationMedium
L = 0.9 mm = 3.5 kgα

A uniform slender rod of mass 3.5 kg and length 0.9 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 3.5 kgL = 0.9 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
θ = 40°vs = 6 m

A thin hoop starts from rest and rolls without slipping down a slope inclined at 40° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 6 m along the slope.

θ = 40°s = 6 mI = m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
N1​ = ?N2​

Two parallel shafts are 40 mm apart. They must be connected by a pair of spur gears with a module of 2 mm and a speed reduction of 1.5 : 1. How many teeth N1 must the pinion have?

a = 40 mmm = 2 mmi = 1.5
N1 =
16.Gears & gear trainsHard
A = 15B = 50C = 20D = 48

An 11 kW motor at 2900 rpm drives gear A (15 teeth), which meshes with gear B (50 teeth). Gear C (20 teeth) on the same shaft as B drives gear D (48 teeth) on the output shaft. Each gear mesh has an efficiency of 98%. Find the output torque Tout.

P = 11 kWnin = 2900 rpmA = 15B = 50C = 20D = 48ηmesh = 98%
Tout = N·m
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 2.7 s? Use g = 9.81 m/s². Find L.

T = 2.7 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
1.8 kgk = 140 N/mA = 8 cm

A 1.8 kg mass on a spring with k = 140 N/m is pulled 8 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 1.8 kgk = 140 N/mA = 8 cm
E = J
19.Mechanical vibrationsMedium
tx25 mm2 cycles11.7 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 25 mm is followed 2 cycles later by a peak of 11.7 mm. Find the damping ratio ζ.

x0 = 25 mmx2 = 11.7 mmn = 2
ζ =
20.Mechanical vibrationsHard
k1​ = 40k2​ = 10m = 50 kg

A 50 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 40 kN/m and k₂ = 10 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 40 kN/mk2 = 10 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: v = 105.1 m/s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Speed after the distance

v = √(2·a·s) = √(2·3.25·1700) = 105.1 m/s

Answer

v = 105.1 m/s
(378.4 km/h)
2.Kinematics

Answer: hmax = 92.6 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 38·1 = 38 m/s
h₁ = ½·38·1² = 19 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 38²/(2·9.81) = 73.6 m
hmax = 19 + 73.6 = 92.6 m

Answer

hmax = 92.6 m
3.Newton’s laws

Answer: T = 8.993 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration

The net driving force is the difference of the weights; it moves the total mass.

a = (5.5 − 0.5)·9.81/(5.5 + 0.5) = 8.175 m/s²

Tension from the lighter mass

T − m2·g = m2·a → T = 0.5·(9.81 + 8.175) = 8.993 N

Answer

T = 8.993 N
4.Newton’s laws

Answer: d = 4.969 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 20° + 0.25·cos 20°) = 5.66 m/s²

Distance

d = v₀²/(2a) = 7.5²/(2·5.66) = 4.969 m

Answer

d = 4.969 m
5.Projectile motion

Answer: t = 3.46 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 24·cos 45° = 16.97 m/s
vy = v0·sin θ = 24·sin 45° = 16.97 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·16.97/9.81 = 3.46 s

Answer

t = 3.46 s
6.Projectile motion

Answer: H = 62.15 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 19·sin 20° = 6.498 m/s

Rise above the cliff

Δh = vy²/(2g) = 6.498²/(2·9.81) = 2.152 m

Height above the ground

H = 60 + 2.152 = 62.15 m

Answer

H = 62.15 m
7.Circular motion

Answer: vmax = 30.04 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.8·9.81·115) = 30.04 m/s

Answer

vmax = 30.04 m/s (108.2 km/h)
8.Circular motion

Answer: vmax = 18.3 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points down the slope.

N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g

Speed

v = √(140·9.81·0.2382/0.9764) = 18.3 m/s

Answer

vmax = 18.3 m/s
(65.9 km/h)
9.Work & energy

Answer: T = 14.4 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the bottom

v² = 2gL(1 − cos θ) = 2·9.81·0.8·(1 − cos 40°) = 3.672 m²/s²

Forces at the bottom

m·g = 1·9.81 = 9.81 N
T = mg + mv²/L = 9.81 + 1·3.672/0.8 = 14.4 N

Answer

T = 14.4 N

Check: T = mg(3 − 2cos θ) = 14.4 N.

10.Work & energy

Answer: x = 48.92 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 39.24·(3.5 − 0.3·1.5) = 119.7 J

Maximum compression

½kx² = 119.7 → x = √(2·119.7/1000) = 0.4892 m = 48.92 cm

Answer

x = 48.92 cm
11.Momentum & collisions

Answer: v′2 = 1.895 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (4.5 − 5)/(4.5 + 5)·2 = −0.1053 m/s
v′2 = 2·4.5/(4.5 + 5)·2 = 1.895 m/s

Answer

v′2 = 1.895 m/s
12.Momentum & collisions

Answer: v′ = 14.45 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1200·14 = 16800 kg·m/s
py = 1400·24 = 33600 kg·m/s

Speed of the wreck

v′ = √(px² + py²)/(m1 + m2) = 37566/2600 = 14.45 m/s

Answer

v′ = 14.45 m/s
13.Rigid-body rotation

Answer: R = 8.584 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·0.9) = 16.35 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 3.5·(9.81 − 7.357) = 8.584 N

Answer

R = 8.584 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: v = 6.151 m/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 6·sin 40° = 3.857 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 1)
v = √(2·9.81·3.857/2) = 6.151 m/s

Answer

v = 6.151 m/s
15.Gears & gear trains

Answer: N1 = 16

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·40/2 = 40

Split by the ratio

N1 = 40/(1 + 1.5) = 16

Answer

N1 = 16
16.Gears & gear trains

Answer: Tout = 278.3 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 2900·(15/50)·(20/48) = 362.5 rpm
ωout = 2π·362.5/60 = 37.96 rad/s

Output power and torque

Pout = 11000·0.98² = 10564 W
Tout = Pout/ωout = 10564/37.96 = 278.3 N·m

Answer

Tout = 278.3 N·m
17.Springs & pendulums

Answer: L = 1.811 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(2.7/2π)² = 1.811 m

Answer

L = 1.811 m
18.Springs & pendulums

Answer: E = 0.448 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(140/1.8) = 8.819 rad/s

Energy

E = ½·k·A² = ½·140·0.08² = 0.448 J

Answer

E = 0.448 J
19.Mechanical vibrations

Answer: ζ = 0.06031

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/2)·ln(25/11.7) = 0.3796

Damping ratio

ζ = δ/√(4π² + δ²) = 0.3796/√(39.48 + 0.1441) = 0.06031

Answer

ζ = 0.06031
20.Mechanical vibrations

Answer: fn = 5.033 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 40 + 10 = 50 kN/m

Natural frequency

ωn = √(50000/50) = 31.62 rad/s
fn = 31.62/(2π) = 5.033 Hz

Answer

fn = 5.033 Hz

ExamProblems · examproblems.com/courses/dynamics