Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 3.5 m/s²car28 m/s

A car speeding at a constant 28 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3.5 m/s². How far from its starting point does the police car catch up? Find d.

vcar = 28 m/sapolice = 3.5 m/s²v0,police = 0
d = m
2.KinematicsHard
v₀ = 19 m/s35 m

A ball is thrown straight up at 19 m/s from the edge of a roof 35 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 19 m/sh₀ = 35 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 20°a = ?m = 18 kg

An 18 kg block slides down a frictionless slope at 20° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 18 kgθ = 20°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 25°blockv₀ = 8.5 m/s

A block is given a push so that it starts sliding up a ramp at 25° with a speed of 8.5 m/s. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 8.5 m/sθ = 25°μ = 0.25g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 18 m/s60°rangeH = ?

A ball is launched at 60° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 18 m/sθ = 60°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 20 mv0​ = 30 m/s30°H = ?

A ball is launched at 30 m/s and 30° above the horizontal from the top of a 20 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 30 m/sθ = 30°h = 20 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 75 m22 m/s

A 1100 kg car drives over the top of a hump in the road at 22 m/s. The top of the hump is a circular arc of radius 75 m. Use g = 9.81 m/s². Find the normal force N of the road on the car at the top.

m = 1100 kgv = 22 m/sr = 75 mg = 9.81 m/s²
N = N
8.Circular motionHard
r = 1.5 mv = 4.5 m/s

A 1.8 kg ball on a string 1.5 m long is swung in a vertical circle. At the lowest point it moves at 4.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.8 kgr = 1.5 mv = 4.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
54 km/h5°1800 kg

A 1800 kg car drives up a 5° slope at a constant 54 km/h. Air resistance and rolling resistance together amount to 350 N. Find the power P the wheels must deliver, in kW.

m = 1800 kgθ = 5°Fr = 350 Nv = 54 km/hg = 9.81 m/s²
P = kW
10.Work & energyHard
F = 115 N15°μ = 0.1520 kg

A 20 kg block starts from rest at the bottom of a 15° slope and is pulled up the slope by a constant force of 115 N parallel to the slope. The coefficient of kinetic friction is 0.15. Find the speed v of the block after it has moved 10 m up the slope.

m = 20 kgF = 115 Nθ = 15°μ = 0.15d = 10 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
4.5 kg9 m/s5 kg

A 4.5 kg glider moving at 9 m/s makes a perfectly elastic head-on collision with a 5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 4.5 kgm2 = 5 kgv1 = 9 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
2000 kg23 m/s1100 kg19 m/sv′ = ?

At a crossing a 2000 kg car travelling east at 23 m/s collides with a 1100 kg car travelling north at 19 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.

m1 = 2000 kgv1 = 23 m/s (E)m2 = 1100 kgv2 = 19 m/s (N)
v′ = m/s
13.Rigid-body rotationMedium
n = 1000 rpmP = 182 kW

A shaft transmits 182 kW at 1000 rpm. Find the torque T in the shaft.

P = 182 kWn = 1000 rpm
T = N·m
14.Rigid-body rotationHard
disc: 19 kgring: 9 kgn1​ = 200 rpm

A uniform solid disc (mass 19 kg, radius 0.45 m) spins freely at 200 rpm about a vertical frictionless shaft. A thin ring of mass 9 kg and the same radius is dropped onto it from rest, centred on the shaft, and the two quickly spin together. How much kinetic energy ΔE is lost in the process?

Mdisc = 19 kgMring = 9 kgR = 0.45 mn1 = 200 rpm
ΔE = J
15.Gears & gear trainsMedium
N1​ = 32N2​ = 50

A 5.5 kW motor running at 1450 rpm drives a pinion with 32 teeth, which meshes with a gear with 50 teeth. The gear pair has an efficiency of 96%. Find the torque T1 on the motor shaft.

P = 5.5 kWn1 = 1450 rpmN1 = 32N2 = 50η = 96%
T1 = N·m
16.Gears & gear trainsHard
A = 24B = 36C = 16D = 80

A 2.2 kW motor at 1440 rpm drives gear A (24 teeth), which meshes with gear B (36 teeth). Gear C (16 teeth) on the same shaft as B drives gear D (80 teeth) on the output shaft. Each gear mesh has an efficiency of 95%. Find the output torque Tout.

P = 2.2 kWnin = 1440 rpmA = 24B = 36C = 16D = 80ηmesh = 95%
Tout = N·m
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 1.7 s? Use g = 9.81 m/s². Find L.

T = 1.7 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
3.1 kgk = 290 N/mA = 18 cm

A 3.1 kg mass on a spring with k = 290 N/m is pulled 18 cm from equilibrium and released. Find its maximum acceleration amax.

m = 3.1 kgk = 290 N/mA = 18 cm
amax = m/s²
19.Mechanical vibrationsMedium
tx30 mm3 cycles11.7 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 30 mm is followed 3 cycles later by a peak of 11.7 mm. Find the damping ratio ζ.

x0 = 30 mmx3 = 11.7 mmn = 3
ζ =
20.Mechanical vibrationsHard
k1​ = 20k2​ = 25k3​ = 5m = 50 kg

A 50 kg mass hangs from spring k₃ = 5 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 20 kN/m and k₂ = 25 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 20 kN/mk2 = 25 kN/mk3 = 5 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 448 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·28/3.5 = 16 s

Distance

d = v·t = 28·16 = 448 m

Answer

d = 448 m

At that moment the police car moves at 2v = 56 m/s.

2.Kinematics

Answer: t = 5.236 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−35 = 19·t − ½·9.81·t²
4.905·t² − 19·t − 35 = 0

Solve the quadratic

Only the positive root is physical.

t = (19 + √(19² + 2·9.81·35))/9.81 = 5.236 s

Answer

t = 5.236 s
3.Newton’s laws

Answer: a = 3.355 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 20° − 0·cos 20°) = 9.81·(0.342 − 0) = 3.355 m/s²

Answer

a = 3.355 m/s²
4.Newton’s laws

Answer: d = 5.672 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 25° + 0.25·cos 25°) = 6.369 m/s²

Distance

d = v₀²/(2a) = 8.5²/(2·6.369) = 5.672 m

Answer

d = 5.672 m
5.Projectile motion

Answer: H = 12.39 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 18·cos 60° = 9 m/s
vy = v0·sin θ = 18·sin 60° = 15.59 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 15.59²/(2·9.81) = 12.39 m

Answer

H = 12.39 m
6.Projectile motion

Answer: H = 31.47 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 30·sin 30° = 15 m/s

Rise above the cliff

Δh = vy²/(2g) = 15²/(2·9.81) = 11.47 m

Height above the ground

H = 20 + 11.47 = 31.47 m

Answer

H = 31.47 m
7.Circular motion

Answer: N = 3692 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the top

Towards the centre (down) is positive.

m·g − N = m·v²/r
N = 1100·9.81 − 1100·22²/75 = 10791 − 7099 = 3692 N

Answer

N = 3692 N

The car feels lighter: the road pushes up less than its weight.

8.Circular motion

Answer: T = 41.96 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.8·9.81 + 1.8·4.5²/1.5 = 17.66 + 24.3 = 41.96 N

Answer

T = 41.96 N
9.Work & energy

Answer: P = 28.33 kW

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.

Driving force

m·g = 1800·9.81 = 17658 N
mg·sin θ = 17658·sin 5° = 1539 N
F = 1539 + 350 = 1889 N

Power

v = 54/3.6 = 15 m/s
P = F·v = 1889·15 = 28335 W = 28.33 kW

Answer

P = 28.33 kW
10.Work & energy

Answer: v = 5.983 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 20·9.81 = 196.2 N
mg·sin θ = 50.78 N
μ·mg·cos θ = 28.43 N

Work–energy

½mv² = (115 − 79.21)·10 = 357.9 J
v = √(2·357.9/20) = 5.983 m/s

Answer

v = 5.983 m/s
11.Momentum & collisions

Answer: v′2 = 8.526 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (4.5 − 5)/(4.5 + 5)·9 = −0.4737 m/s
v′2 = 2·4.5/(4.5 + 5)·9 = 8.526 m/s

Answer

v′2 = 8.526 m/s
12.Momentum & collisions

Answer: v′ = 16.3 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 2000·23 = 46000 kg·m/s
py = 1100·19 = 20900 kg·m/s

Speed of the wreck

v′ = √(px² + py²)/(m1 + m2) = 50525/3100 = 16.3 m/s

Answer

v′ = 16.3 m/s
13.Rigid-body rotation

Answer: T = 1738 N·m

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1000/60 = 104.7 rad/s

Torque

T = P/ω = 182000/104.7 = 1738 N·m

Answer

T = 1738 N·m
14.Rigid-body rotation

Answer: ΔE = 205.3 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = ½·19·0.45² = 1.924 kg·m²
I2 = 9·0.45² = 1.823 kg·m²

Conservation of angular momentum

n2 = n1·I1/(I1 + I2) = 200·1.924/3.746 = 102.7 rpm

Kinetic energy before and after

E1 = ½·1.924·20.94² = 421.9 J
E2 = ½·3.746·10.76² = 216.7 J
ΔE = 421.9 − 216.7 = 205.3 J

Answer

ΔE = 205.3 J
15.Gears & gear trains

Answer: T1 = 36.22 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1450/60 = 151.8 rad/s
T1 = P/ω₁ = 5500/151.8 = 36.22 N·m

Answer

T1 = 36.22 N·m
16.Gears & gear trains

Answer: Tout = 98.75 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1440·(24/36)·(16/80) = 192 rpm
ωout = 2π·192/60 = 20.11 rad/s

Output power and torque

Pout = 2200·0.95² = 1986 W
Tout = Pout/ωout = 1986/20.11 = 98.75 N·m

Answer

Tout = 98.75 N·m
17.Springs & pendulums

Answer: L = 0.7181 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(1.7/2π)² = 0.7181 m

Answer

L = 0.7181 m
18.Springs & pendulums

Answer: amax = 16.84 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(290/3.1) = 9.672 rad/s

Maximum acceleration

amax = A·ω² = 0.18·9.672² = 16.84 m/s²

Answer

amax = 16.84 m/s²
19.Mechanical vibrations

Answer: ζ = 0.04989

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/3)·ln(30/11.7) = 0.3139

Damping ratio

ζ = δ/√(4π² + δ²) = 0.3139/√(39.48 + 0.09851) = 0.04989

Answer

ζ = 0.04989
20.Mechanical vibrations

Answer: fn = 1.51 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 20 + 25 = 45 kN/m
keq = 45·5/(45 + 5) = 4.5 kN/m

Natural frequency

ωn = √(4500/50) = 9.487 rad/s
fn = 9.487/(2π) = 1.51 Hz

Answer

fn = 1.51 Hz

ExamProblems · examproblems.com/courses/dynamics