In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 54 km/h brakes with a constant deceleration of 5.5 m/s² until it stops. How long does braking take? Find t.
v₀ = 54 km/ha = −5.5 m/s²v = 0
t = s
2.KinematicsHard
A ball is thrown straight up at 16 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 16 m/sh₀ = 40 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 10 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 10 kgθ = 20°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 3 kg block on a ramp at 25° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 10 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.1. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 3 kgm2 = 10 kgθ = 25°μ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 35° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 14 m/sθ = 35°g = 9.81 m/s²
t = s
6.Projectile motionHard
A ball is launched at 60° above horizontal from the top of a 20 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 29 m/sθ = 60°h = 20 mg = 9.81 m/s²
t = s
7.Circular motionMedium
A car takes a flat curve of radius 75 m. The coefficient of static friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 75 mμs = 0.5g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A 1.3 kg ball on a string 1.2 m long is swung in a vertical circle. At the lowest point it moves at 7.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 1.3 kgr = 1.2 mv = 7.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
A 1500 kg car drives up a 3° slope at a constant 90 km/h. Air resistance and rolling resistance together amount to 350 N. Find the power P the wheels must deliver, in kW.
An 8 kg block rests on a rough horizontal table (μ = 0.1). A light string runs from it over a smooth pulley at the edge of the table to a hanging 5 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 1 m.
m1 = 8 kgm2 = 5 kgμ = 0.1d = 1 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
A 1 kg glider moving at 6 m/s makes a perfectly elastic head-on collision with a 5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 1 kgm2 = 5 kgv1 = 6 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
An 800 kg car runs into a parked 1200 kg car. The wrecks lock together and skid 10 m before stopping. The coefficient of kinetic friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.
A flywheel with a moment of inertia of 37 kg·m² spins at 1800 rpm. A brake applies a constant friction torque of 50 N·m. How long t does it take to stop?
I = 37 kg·m²n = 1800 rpmTb = 50 N·m
t = s
14.Rigid-body rotationHard
A solid sphere starts from rest and rolls without slipping down a slope inclined at 35° to the horizontal. Use g = 9.81 m/s². Its radius is 0.2 m. Find its angular velocity ω after it has rolled 1.5 m along the slope.
θ = 35°s = 1.5 mI = (2/5)·m·r²g = 9.81 m/s²r = 0.2 m
ω = rad/s
15.Gears & gear trainsMedium
A 2.2 kW motor at 1450 rpm drives a worm with 1 start(s). The worm wheel has 60 teeth and the drive has an efficiency of 70%. Find the output torque Tw on the wheel shaft.
z = 1Nw = 60n = 1450 rpmP = 2.2 kWη = 70%
Tw = N·m
16.Gears & gear trainsHard
An open belt connects a 125 mm pulley and a 250 mm pulley whose centres are 600 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.
d1 = 125 mmd2 = 250 mmC = 600 mm
θ = °
17.Springs & pendulumsMedium
A 0.9 kg mass on a spring with k = 80 N/m oscillates on a frictionless surface with an amplitude of 12 cm. Find its speed v when it is 9 cm from equilibrium.
m = 0.9 kgk = 80 N/mA = 12 cmx = 9 cm
v = m/s
18.Springs & pendulumsHard
A 3.2 kg mass on a spring with k = 420 N/m is pulled 18 cm from equilibrium and released. Find its maximum acceleration amax.
m = 3.2 kgk = 420 N/mA = 18 cm
amax = m/s²
19.Mechanical vibrationsMedium
In a free-vibration test of a damped mass–spring system, a displacement peak of 30 mm is followed 4 cycles later by a peak of 14.1 mm. Find the damping ratio ζ.
x0 = 30 mmx4 = 14.1 mmn = 4
ζ =
20.Mechanical vibrationsHard
A 5 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 12 kN/m and the lower one k₂ = 10 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 5 kgk1 = 12 kN/mk2 = 10 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: t = 2.727 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 54/3.6 = 15 m/s
Braking time
0 = v₀ − a·t → t = v₀/a = 15/5.5 = 2.727 s
Answer
t = 2.727 s
2.Kinematics
Answer: t = 4.92 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−40 = 16·t − ½·9.81·t²
4.905·t² − 16·t − 40 = 0
Solve the quadratic
Only the positive root is physical.
t = (16 + √(16² + 2·9.81·40))/9.81 = 4.92 s
Answer
t = 4.92 s
3.Newton’s laws
Answer: a = 1.051 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the string
m₂·g = 98.1 N
m₁·g·sin θ = 12.44 N
μ·m₁·g·cos θ = 2.667 N
Acceleration of the system
a = (98.1 − 12.44 − 2.667)/13 = 6.384 m/s²
Tension from the hanging mass
m2·g − T = m2·a → T = 10·(9.81 − 6.384) = 34.26 N
Answer
T = 34.26 N
5.Projectile motion
Answer: t = 1.637 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 14·cos 35° = 11.47 m/s
vy = v0·sin θ = 14·sin 35° = 8.03 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·8.03/9.81 = 1.637 s
Answer
t = 1.637 s
6.Projectile motion
Answer: t = 5.821 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 29·cos 60° = 14.5 m/s
vy = v0·sin θ = 29·sin 60° = 25.11 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 20 + 25.11·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (25.11 + √(630.7 + 392.4))/9.81 = 5.821 s
Answer
t = 5.821 s
7.Circular motion
Answer: vmax = 19.18 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.5·9.81·75) = 19.18 m/s
Answer
vmax = 19.18 m/s (69.05 km/h)
8.Circular motion
Answer: T = 73.69 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 1.3·9.81 + 1.3·7.5²/1.2 = 12.75 + 60.94 = 73.69 N
Answer
T = 73.69 N
9.Work & energy
Answer: P = 28 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 1500·9.81 = 14715 N
mg·sin θ = 14715·sin 3° = 770.1 N
F = 770.1 + 350 = 1120 N
Power
v = 90/3.6 = 25 m/s
P = F·v = 1120·25 = 28003 W = 28 kW
Answer
P = 28 kW
10.Work & energy
Answer: v = 2.518 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy released and lost
m₂g·d = 49.05·1 = 49.05 J
μ·m₁g·d = 0.1·78.48·1 = 7.848 J
Kinetic energy of both blocks
½(m₁ + m₂)v² = 41.2 → v = √(2·41.2/13) = 2.518 m/s
Answer
v = 2.518 m/s
11.Momentum & collisions
Answer: v′1 = −4 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (1 − 5)/(1 + 5)·6 = −4 m/s
v′2 = 2·1/(1 + 5)·6 = 2 m/s
Answer
v′1 = −4 m/s
The minus sign means the first glider bounces back.
12.Momentum & collisions
Answer: v1 = 24.76 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·1800/60 = 188.5 rad/s
Deceleration and time
α = Tb/I = 50/37 = 1.351 rad/s²
t = ω/α = 188.5/1.351 = 139.5 s
Answer
t = 139.5 s
14.Rigid-body rotation
Answer: ω = 17.36 rad/s
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Height dropped
h = s·sin θ = 1.5·sin 35° = 0.8604 m
Energy balance with rolling
Rolling without slipping: ω = v/r, and friction does no work at the contact point.
m·g·h = ½·m·v²·(1 + 0.4)
v = √(2·9.81·0.8604/1.4) = 3.472 m/s
ω = v/r = 3.472/0.2 = 17.36 rad/s
Answer
ω = 17.36 rad/s
15.Gears & gear trains
Answer: Tw = 608.5 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Wheel speed
nw = n·z/Nw = 1450·1/60 = 24.17 rpm
Output torque
ωw = 2π·24.17/60 = 2.531 rad/s
Tw = η·P/ωw = 0.7·2200/2.531 = 608.5 N·m
Answer
Tw = 608.5 N·m
16.Gears & gear trains
Answer: θ = 168 °
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt angle
asin(0.1042) = 5.979°
Angle of wrap
θ = 180 − 2·5.979 = 168°
Answer
θ = 168°
17.Springs & pendulums
Answer: v = 0.7483 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(80/0.9) = 9.428 rad/s
Speed at x
v = ω·√(A² − x²) = 9.428·√(0.12² − 0.09²) = 0.7483 m/s
Answer
v = 0.7483 m/s
18.Springs & pendulums
Answer: amax = 23.62 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(420/3.2) = 11.46 rad/s
Maximum acceleration
amax = A·ω² = 0.18·11.46² = 23.62 m/s²
Answer
amax = 23.62 m/s²
19.Mechanical vibrations
Answer: ζ = 0.03003
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.