In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A plane needs a speed of 200 km/h to take off and the usable runway is 1500 m long. Starting from rest, what constant acceleration a does it need?
v₀ = 0v = 200 km/hs = 1500 m
a = m/s²
2.KinematicsHard
A ball is thrown straight up at 5 m/s from the edge of a roof 35 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.
v₀ = 5 m/sh₀ = 35 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 40 kg sled is pulled across level snow by a rope at 15° above the horizontal with a force of 170 N. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the sled.
m = 40 kgF = 170 Nθ = 15°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 4 kg block on a ramp at 40° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 8.5 kg mass. The hanging mass moves down. The ramp is frictionless. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 4 kgm2 = 8.5 kgθ = 40°μ = 0g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 60° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 34 m/sθ = 60°g = 9.81 m/s²
t = s
6.Projectile motionHard
A ball is launched at 40° above horizontal from the top of a 5 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 29 m/sθ = 40°h = 5 mg = 9.81 m/s²
t = s
7.Circular motionMedium
A car takes a flat curve of radius 70 m. The coefficient of static friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 70 mμs = 0.5g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A curve of radius 190 m is banked at 15°, and the coefficient of static friction between tyres and road is 0.15. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.
r = 190 mθ = 15°μs = 0.15g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
A car travelling at 100 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.8. Find the stopping distance d.
v = 100 km/hμ = 0.8g = 9.81 m/s²
d = m
10.Work & energyHard
A 5 kg cart is released from rest at a height of 6.4 m on a smooth track that leads into a vertical circular loop of radius 2 m. Find the normal force N the track exerts on the cart at the top of the loop.
m = 5 kgh = 6.4 mR = 2 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
A 4 kg glider moving at 10 m/s makes a perfectly elastic head-on collision with a 5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 4 kgm2 = 5 kgv1 = 10 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
A 0.5 kg ball hits a wall at 13 m/s and bounces straight back at 7 m/s. The contact lasts 40 ms. Find the average force Favg of the wall on the ball.
m = 0.5 kgvin = 13 m/svout = 7 m/sΔt = 40 ms
Favg = N
13.Rigid-body rotationMedium
A uniform slender rod of mass 15.5 kg and length 0.9 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.
m = 15.5 kgL = 0.9 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
A hollow sphere starts from rest and rolls without slipping down a slope inclined at 35° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 3.5 m along the slope.
θ = 35°s = 3.5 mI = (2/3)·m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
A 0.75 kW motor running at 1500 rpm drives a pinion with 15 teeth, which meshes with a gear with 72 teeth. The gear pair has an efficiency of 96%. Find the output torque T2 on the gear shaft.
P = 0.75 kWn1 = 1500 rpmN1 = 15N2 = 72η = 96%
T2 = N·m
16.Gears & gear trainsHard
An open belt connects an 80 mm driving pulley at 1500 rpm to a 315 mm pulley; the centres are 800 mm apart. The coefficient of friction is 0.35 and the tight-side tension may not exceed 800 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).
A simple pendulum has a length of 2.8 m. Use g = 9.81 m/s². Find its period T for small swings.
L = 2.8 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
A 3.4 kg mass on a spring with k = 380 N/m is pulled 8 cm from equilibrium and released. Find the total energy E of the oscillation.
m = 3.4 kgk = 380 N/mA = 8 cm
E = J
19.Mechanical vibrationsMedium
In a free-vibration test of a damped mass–spring system, a displacement peak of 25 mm is followed 4 cycles later by a peak of 0.6 mm. Find the damping ratio ζ.
x0 = 25 mmx4 = 0.6 mmn = 4
ζ =
20.Mechanical vibrationsHard
A 100 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 25 kN/m and the lower one k₂ = 10 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.
m = 100 kgk1 = 25 kN/mk2 = 10 kN/m
keq = kN/m
3Solutions
1.Kinematics
Answer: a = 1.029 m/s²
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v = 200/3.6 = 55.56 m/s
Acceleration
a = v²/(2s) = 55.56²/(2·1500) = 1.029 m/s²
Answer
a = 1.029 m/s²
2.Kinematics
Answer: hmax = 36.27 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Rise above the roof
0 = v₀² − 2·g·Δh → Δh = 5²/(2·9.81) = 1.274 m
Height above the ground
hmax = 35 + 1.274 = 36.27 m
Answer
hmax = 36.27 m
3.Newton’s laws
Answer: a = 2.363 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Normal force
N = m·g − F·sin θ = 392.4 − 170·sin 15° = 348.4 N
Horizontal forces
m·a = F·cos θ − μ·N = 164.2 − 69.68
a = 94.53/40 = 2.363 m/s²
Answer
a = 2.363 m/s²
4.Newton’s laws
Answer: T = 43.83 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the string
m₂·g = 83.39 N
m₁·g·sin θ = 25.22 N
μ·m₁·g·cos θ = 0 N
Acceleration of the system
a = (83.39 − 25.22 − 0)/12.5 = 4.653 m/s²
Tension from the hanging mass
m2·g − T = m2·a → T = 8.5·(9.81 − 4.653) = 43.83 N
Answer
T = 43.83 N
5.Projectile motion
Answer: t = 6.003 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 34·cos 60° = 17 m/s
vy = v0·sin θ = 34·sin 60° = 29.44 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·29.44/9.81 = 6.003 s
Answer
t = 6.003 s
6.Projectile motion
Answer: t = 4.052 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 29·cos 40° = 22.22 m/s
vy = v0·sin θ = 29·sin 40° = 18.64 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 5 + 18.64·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (18.64 + √(347.5 + 98.1))/9.81 = 4.052 s
Answer
t = 4.052 s
7.Circular motion
Answer: vmax = 18.53 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.5·9.81·70) = 18.53 m/s
Answer
vmax = 18.53 m/s (66.71 km/h)
8.Circular motion
Answer: vmax = 28.49 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Force balances
Friction points down the slope.
N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g
Speed
v = √(190·9.81·0.4037/0.9271) = 28.49 m/s
Answer
vmax = 28.49 m/s
(102.6 km/h)
9.Work & energy
Answer: d = 49.16 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Speed in base units
v = 100/3.6 = 27.78 m/s
Energy balance
½mv² = μmg·d → d = v²/(2μg) = 27.78²/(2·0.8·9.81) = 49.16 m
Answer
d = 49.16 m
Doubling the speed makes the stopping distance four times longer.
10.Work & energy
Answer: N = 68.67 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(6.4 − 4) = 47.09 m²/s²
Forces at the top
m·g = 5·9.81 = 49.05 N
N = mv²/R − mg = 5·47.09/2 − 49.05 = 68.67 N
Answer
N = 68.67 N
The cart just makes it round when h = 2.5R; then N = 0 at the top.
11.Momentum & collisions
Answer: v′1 = −1.111 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (4 − 5)/(4 + 5)·10 = −1.111 m/s
v′2 = 2·4/(4 + 5)·10 = 8.889 m/s
Answer
v′1 = −1.111 m/s
The minus sign means the first glider bounces back.
12.Momentum & collisions
Answer: Favg = 250 N
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.5·(7 + 13) = 10 N·s
Average force
Favg = J/Δt = 10/0.04 = 250 N
Answer
Favg = 250 N
13.Rigid-body rotation
Answer: R = 38.01 N
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Moments about the pin
At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.
m·g − R = m·aG → R = 15.5·(9.81 − 7.357) = 38.01 N
Answer
R = 38.01 N
R = m·g/4, independent of the length.
14.Rigid-body rotation
Answer: v = 4.861 m/s
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Height dropped
h = s·sin θ = 3.5·sin 35° = 2.008 m
Energy balance with rolling
Rolling without slipping: ω = v/r, and friction does no work at the contact point.
m·g·h = ½·m·v²·(1 + 0.6667)
v = √(2·9.81·2.008/1.667) = 4.861 m/s
Answer
v = 4.861 m/s
15.Gears & gear trains
Answer: T2 = 22 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Motor torque
ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 750/157.1 = 4.775 N·m
Output torque
T2 = 4.775·72/15·0.96 = 22 N·m
Answer
T2 = 22 N·m
16.Gears & gear trains
Answer: P = 3.171 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Angle of wrap
θ = 2.847 rad
Slack-side tension
eμθ = e0.9964 = 2.708, T₂ = 800/2.708 = 295.4 N
Power
P = (800 − 295.4)·6.283 = 3.171 kW
Answer
P = 3.171 kW
17.Springs & pendulums
Answer: T = 3.357 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Pendulum period
T = 2π·√(2.8/9.81) = 3.357 s
Answer
T = 3.357 s
18.Springs & pendulums
Answer: E = 1.216 J
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(380/3.4) = 10.57 rad/s
Energy
E = ½·k·A² = ½·380·0.08² = 1.216 J
Answer
E = 1.216 J
19.Mechanical vibrations
Answer: ζ = 0.1468
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.