In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car speeding at a constant 20 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3.5 m/s². How long does it take the police car to catch up? Find t.
vcar = 20 m/sapolice = 3.5 m/s²v0,police = 0
t = s
2.KinematicsHard
A ball is thrown straight up at 7 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.
v₀ = 7 m/sh₀ = 40 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 50 kg box is pushed up a ramp at 20° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the pushing force F.
m = 50 kgθ = 20°μ = 0.3g = 9.81 m/s²
F = N
4.Newton’s lawsHard
A 6.5 kg block on a ramp at 25° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 5.5 kg mass. The hanging mass moves down. The ramp is frictionless. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 6.5 kgm2 = 5.5 kgθ = 25°μ = 0g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched from level ground at 15° above the horizontal and lands 115 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.
θ = 15°R = 115 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
A ball is launched at 50° above horizontal from the top of a 50 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 35 m/sθ = 50°h = 50 mg = 9.81 m/s²
t = s
7.Circular motionMedium
A car takes a flat curve of radius 150 m. The coefficient of static friction between tyres and road is 0.4. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 150 mμs = 0.4g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A 2 kg cart is released from rest at a height of 10.5 m on a frictionless track and runs through a vertical loop of radius 2.5 m. Use g = 9.81 m/s². Find the normal force Nbottom of the track on the cart at the bottom of the loop.
m = 2 kgh = 10.5 mR = 2.5 mg = 9.81 m/s²
Nbottom = N
9.Work & energyMedium
A 2 kg block slides 15 m down a slope at 30° to the horizontal, with a coefficient of kinetic friction of 0.35. Find the work Wf done against friction.
m = 2 kgθ = 30°μ = 0.35d = 15 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
A 5 kg cart is released from rest at a height of 6.4 m on a smooth track that leads into a vertical circular loop of radius 2 m. Find the normal force N the track exerts on the cart at the top of the loop.
m = 5 kgh = 6.4 mR = 2 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
A 1.5 kg glider moving at 8 m/s makes a perfectly elastic head-on collision with a 3.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 1.5 kgm2 = 3.5 kgv1 = 8 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
A 0.3 kg ball hits a wall at 19 m/s and bounces straight back at 20 m/s. The contact lasts 5 ms. Find the average force Favg of the wall on the ball.
m = 0.3 kgvin = 19 m/svout = 20 m/sΔt = 5 ms
Favg = N
13.Rigid-body rotationMedium
A motor brings a flywheel with a moment of inertia of 11 kg·m² from rest up to 900 rpm in 58 s. Ignoring losses, find the average power Pavg it delivers, in kW.
I = 11 kg·m²n = 900 rpmt = 58 s
Pavg = kW
14.Rigid-body rotationHard
A hollow sphere of mass 12 kg rolls without slipping at 6.5 m/s. What percentage p of its total kinetic energy is rotational?
m = 12 kgv = 6.5 m/sI = (2/3)·m·r²
p = %
15.Gears & gear trainsMedium
A 120 mm pulley at 720 rpm drives a 200 mm pulley by a belt with 1.5 % slip. Find the speed n2 of the driven pulley.
n1 = 720 rpmd1 = 120 mmd2 = 200 mms = 1.5 %
n2 = rpm
16.Gears & gear trainsHard
In a compound gear train, gear A (16 teeth) on the input shaft turning at 3000 rpm drives gear B (40 teeth). Gear C (50 teeth) is fixed to the same shaft as B and drives gear D (60 teeth) on the output shaft. Find the output speed nout.
nin = 3000 rpmA = 16B = 40C = 50D = 60
nout = rpm
17.Springs & pendulumsMedium
A 1.3 kg mass on a spring with k = 80 N/m oscillates on a frictionless surface with an amplitude of 10 cm. Find its speed v when it is 8 cm from equilibrium.
m = 1.3 kgk = 80 N/mA = 10 cmx = 8 cm
v = m/s
18.Springs & pendulumsHard
A 20 g bullet moving at 100 m/s hits and stays in a 3 kg block resting on a frictionless surface. The block is attached to a horizontal spring with k = 100 N/m. Find the amplitude A of the resulting oscillation in cm.
m = 20 gv = 100 m/sM = 3 kgk = 100 N/m
A = cm
19.Mechanical vibrationsMedium
A 200 kg mass on a spring with a stiffness of 150 kN/m has a viscous damper giving a damping ratio of 0.6. Find the damped natural frequency fd of its free vibration in Hz.
m = 200 kgk = 150 kN/mζ = 0.6
fd = Hz
20.Mechanical vibrationsHard
A 20 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 12 kN/m and the lower one k₂ = 30 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 20 kgk1 = 12 kN/mk2 = 30 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: t = 11.43 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·20/3.5 = 11.43 s
Answer
t = 11.43 s
At that moment the police car moves at 2v = 40 m/s.
2.Kinematics
Answer: hmax = 42.5 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Rise above the roof
0 = v₀² − 2·g·Δh → Δh = 7²/(2·9.81) = 2.497 m
Height above the ground
hmax = 40 + 2.497 = 42.5 m
Answer
hmax = 42.5 m
3.Newton’s laws
Answer: F = 306 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the slope
Constant speed: the forces balance.
F = m·g·sin θ + μ·m·g·cos θ
Pushing force
F = 167.8 + 138.3 = 306 N
Answer
F = 306 N
4.Newton’s laws
Answer: T = 41.58 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the string
m₂·g = 53.96 N
m₁·g·sin θ = 26.95 N
μ·m₁·g·cos θ = 0 N
Acceleration of the system
a = (53.96 − 26.95 − 0)/12 = 2.251 m/s²
Tension from the hanging mass
m2·g − T = m2·a → T = 5.5·(9.81 − 2.251) = 41.58 N
Answer
T = 41.58 N
5.Projectile motion
Answer: v0 = 47.5 m/s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Solve the range formula for v₀
v₀ = √(g·R/sin 2θ) = √(9.81·115/sin 30°) = 47.5 m/s
Answer
v0 = 47.5 m/s
6.Projectile motion
Answer: t = 6.936 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 35·cos 50° = 22.5 m/s
vy = v0·sin θ = 35·sin 50° = 26.81 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 50 + 26.81·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (26.81 + √(718.9 + 981))/9.81 = 6.936 s
Answer
t = 6.936 s
7.Circular motion
Answer: vmax = 24.26 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.4·9.81·150) = 24.26 m/s
Answer
vmax = 24.26 m/s (87.34 km/h)
8.Circular motion
Answer: Nbottom = 184.4 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Speed from energy conservation
v² = 2·9.81·10.5 = 206 m²/s²
Forces
Towards the centre is positive.
N = m·v²/R + m·g = 2·206/2.5 + 19.62 = 184.4 N
Answer
Nbottom = 184.4 N
9.Work & energy
Answer: Wf = 89.2 J
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Friction force
N = mg·cos θ = 19.62·0.866 = 16.99 N
F = μN = 0.35·16.99 = 5.947 N
Work against friction
Wf = F·d = 5.947·15 = 89.2 J
Answer
Wf = 89.2 J
10.Work & energy
Answer: N = 68.67 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(6.4 − 4) = 47.09 m²/s²
Forces at the top
m·g = 5·9.81 = 49.05 N
N = mv²/R − mg = 5·47.09/2 − 49.05 = 68.67 N
Answer
N = 68.67 N
The cart just makes it round when h = 2.5R; then N = 0 at the top.
11.Momentum & collisions
Answer: v′2 = 4.8 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (1.5 − 3.5)/(1.5 + 3.5)·8 = −3.2 m/s
v′2 = 2·1.5/(1.5 + 3.5)·8 = 4.8 m/s
Answer
v′2 = 4.8 m/s
12.Momentum & collisions
Answer: Favg = 2340 N
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.3·(20 + 19) = 11.7 N·s
Average force
Favg = J/Δt = 11.7/0.005 = 2340 N
Answer
Favg = 2340 N
13.Rigid-body rotation
Answer: Pavg = 0.8423 kW
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·900/60 = 94.25 rad/s
Energy
E = ½·I·ω² = ½·11·94.25² = 48855 J
Average power
Pavg = E/t = 48855/58 = 842.3 W = 0.8423 kW
Answer
Pavg = 0.8423 kW
14.Rigid-body rotation
Answer: p = 40 %
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
The share depends only on the shape, not on the mass or the speed.
15.Gears & gear trains
Answer: n2 = 425.5 rpm
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Speed without slip
720·120/200 = 432 rpm
With slip
n2 = 432·0.985 = 425.5 rpm
Answer
n2 = 425.5 rpm
16.Gears & gear trains
Answer: nout = 1000 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
First stage
nB = 3000·16/40 = 1200 rpm = nC
Second stage
nout = 1200·50/60 = 1000 rpm
Answer
nout = 1000 rpm
total ratio = 3 : 1
17.Springs & pendulums
Answer: v = 0.4707 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(80/1.3) = 7.845 rad/s
Speed at x
v = ω·√(A² − x²) = 7.845·√(0.1² − 0.08²) = 0.4707 m/s
Answer
v = 0.4707 m/s
18.Springs & pendulums
Answer: A = 11.51 cm
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Speed after impact
V = m·v/(m + M) = 0.02·100/3.02 = 0.6623 m/s
Angular frequency
ω = √(k/(m + M)) = √(100/3.02) = 5.754 rad/s
Amplitude
A = V/ω = 0.6623/5.754 = 0.1151 m = 11.51 cm
Answer
A = 11.51 cm
19.Mechanical vibrations
Answer: fd = 3.487 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(150000/200) = 27.39 rad/s
fn = 27.39/(2π) = 4.359 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 4.359·√(1 − 0.6²) = 3.487 Hz
Answer
fd = 3.487 Hz
20.Mechanical vibrations
Answer: fn = 3.295 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.