Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)2.5 s10

A car driving at 36 km/h brakes with a constant deceleration of 4 m/s² until it stops. Find the braking distance s.

v₀ = 36 km/ha = −4 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 13 m/s40 m

A ball is thrown straight up at 13 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 13 m/sh₀ = 40 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 20°a = ?m = 11 kg

An 11 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 11 kgθ = 20°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
8 kg7 kgTF = 115 Nμ = 0.3

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 115 N pulls the front 7 kg block; the 8 kg block is towed behind. The coefficient of kinetic friction is 0.3 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.

m1 = 8 kgm2 = 7 kgF = 115 Nμ = 0.3g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 22 m/s70°rangeH = ?

A ball is launched at 70° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 22 m/sθ = 70°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 45 mv0​ = 33 m/s40°x = ?

A ball is launched at 40° above horizontal from the top of a 45 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 33 m/sθ = 40°h = 45 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 130 mvmax​ = ?

A car takes a flat curve of radius 130 m. The coefficient of static friction between tyres and road is 0.3. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 130 mμs = 0.3g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
θ = 25°to centrevmin​ = ?

A curve of radius 120 m is banked at 25°, and the coefficient of static friction between tyres and road is 0.15. Use g = 9.81 m/s². Find the lowest speed vmin at which a car can take the curve without sliding down the bank.

r = 120 mθ = 25°μs = 0.15g = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
90 km/h

A car travelling at 90 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.4. Find the stopping distance d.

v = 90 km/hμ = 0.4g = 9.81 m/s²
d = m
10.Work & energyHard
h = 4 mL = 1.5 mμ = 0.1k = 2500 N/m

A 5 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.1) and then runs onto a spring (k = 2500 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 5 kgh = 4 mL = 1.5 mμ = 0.1k = 2500 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
1400 kg6 m/s600 kg

A 1400 kg car moving at 6 m/s runs into a stationary 600 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 1400 kgv1 = 6 m/sm2 = 600 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
11 m/s18 m/s

A 0.6 kg ball hits a wall at 11 m/s and bounces straight back at 18 m/s. The contact lasts 20 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.6 kgvin = 11 m/svout = 18 m/sΔt = 20 ms
J = N·s
13.Rigid-body rotationMedium
14.5 kgaαM = 8.5 kgR = 0.45 m

A 14.5 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 8.5 kg and radius 0.45 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the angular acceleration α of the pulley.

m = 14.5 kgM = 8.5 kgR = 0.45 mg = 9.81 m/s²
α = rad/s²
14.Rigid-body rotationHard
θ = 20°as = 3 m

A hollow sphere rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². It starts from rest. How long t does it take to roll 3 m down the slope?

θ = 20°I = (2/3)·m·r²g = 9.81 m/s²s = 3 m
t = s
15.Gears & gear trainsMedium
d1​ = 125 mmd2​ = 250 mm720 rpmT1​ = 400 NT2​ = 160 NP = ?

A belt runs on a 125 mm driving pulley at 720 rpm. The tension is 400 N on the tight side and 160 N on the slack side. Find the power P transmitted, in kW.

d1 = 125 mmn1 = 720 rpmT1 = 400 NT2 = 160 N
P = kW
16.Gears & gear trainsHard
A = 12B = 16C = 24D = ?

In a compound gear train, gear A (12 teeth) on the input shaft turns at 960 rpm and drives gear B (16 teeth). Gear C (24 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 288 rpm. How many teeth ND must gear D have?

nin = 960 rpmA = 12B = 16C = 24nout = 288 rpm
ND =
17.Springs & pendulumsMedium
L = 2.4 m

A simple pendulum has a length of 2.4 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 2.4 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
2.6 kgk = 190 N/mA = 16 cm

A 2.6 kg mass on a spring with k = 190 N/m is pulled 16 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 2.6 kgk = 190 N/mA = 16 cm
E = J
19.Mechanical vibrationsMedium
k = 10 kN/mc = 30 N·s/mm = 8 kg

An 8 kg mass is supported by a spring with a stiffness of 10 kN/m and a viscous damper with a damping coefficient of 30 N·s/m. Find the damping ratio ζ.

m = 8 kgk = 10 kN/mc = 30 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 100k2​ = 60m = 50 kg

A 50 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 100 kN/m and the lower one k₂ = 60 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 50 kgk1 = 100 kN/mk2 = 60 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: s = 12.5 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 36/3.6 = 10 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 10²/(2·4) = 12.5 m

Answer

s = 12.5 m
2.Kinematics

Answer: hmax = 48.61 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 13²/(2·9.81) = 8.614 m

Height above the ground

hmax = 40 + 8.614 = 48.61 m

Answer

hmax = 48.61 m
3.Newton’s laws

Answer: a = 0.5897 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 20° − 0.3·cos 20°) = 9.81·(0.342 − 0.2819) = 0.5897 m/s²

Answer

a = 0.5897 m/s²
4.Newton’s laws

Answer: a = 4.724 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (115 − 44.15)/15 = 4.724 m/s²

Answer

a = 4.724 m/s²
5.Projectile motion

Answer: H = 21.78 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 22·cos 70° = 7.524 m/s
vy = v0·sin θ = 22·sin 70° = 20.67 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 20.67²/(2·9.81) = 21.78 m

Answer

H = 21.78 m
6.Projectile motion

Answer: x = 148.7 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 33·cos 40° = 25.28 m/s
vy = v0·sin θ = 33·sin 40° = 21.21 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 45 + 21.21·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (21.21 + √(449.9 + 882.9))/9.81 = 5.884 s

Horizontal distance

x = vx·t = 25.28·5.884 = 148.7 m

Answer

x = 148.7 m
7.Circular motion

Answer: vmax = 19.56 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.3·9.81·130) = 19.56 m/s

Answer

vmax = 19.56 m/s (70.42 km/h)
8.Circular motion

Answer: vmin = 18.66 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points up the slope.

N·(sin θ − μ·cos θ) = m·v²/r
N·(cos θ + μ·sin θ) = m·g

Speed

v = √(120·9.81·0.2867/0.9697) = 18.66 m/s

Answer

vmin = 18.66 m/s
(67.16 km/h)
9.Work & energy

Answer: d = 79.64 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Speed in base units

v = 90/3.6 = 25 m/s

Energy balance

½mv² = μmg·d → d = v²/(2μg) = 25²/(2·0.4·9.81) = 79.64 m

Answer

d = 79.64 m

Doubling the speed makes the stopping distance four times longer.

10.Work & energy

Answer: v = 8.691 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 49.05·(4 − 0.1·1.5) = 188.8 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·3.85) = 8.691 m/s

Answer

v = 8.691 m/s
11.Momentum & collisions

Answer: ΔK = 7560 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1400·6/2000 = 4.2 m/s

Kinetic energy before and after

Kbefore = ½·1400·6² = 25200 J
Kafter = ½·2000·4.2² = 17640 J

Energy lost

ΔK = 25200 − 17640 = 7560 J

Answer

ΔK = 7560 J

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: J = 17.4 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.6·(18 + 11) = 17.4 N·s

Answer

J = 17.4 N·s
13.Rigid-body rotation

Answer: α = 16.86 rad/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Block and pulley

block: m·g − T = m·a
pulley: T·R = I·α = ½·M·R²·(a/R) → T = ½·M·a

Acceleration

a = m·g/(m + M/2) = 14.5·9.81/(14.5 + 4.25) = 7.586 m/s²

Angular acceleration

α = a/R = 7.586/0.45 = 16.86 rad/s²

Answer

α = 16.86 rad/s²
14.Rigid-body rotation

Answer: t = 1.726 s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.6667·m·r²·(a/r) → f = 0.6667·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 20°/1.667 = 2.013 m/s²

Time

s = ½·a·t² → t = √(2·3/2.013) = 1.726 s

Answer

t = 1.726 s
15.Gears & gear trains

Answer: P = 1.131 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 4.712 m/s

Power

P = (400 − 160)·4.712 = 1131 W = 1.131 kW

Answer

P = 1.131 kW
16.Gears & gear trains

Answer: ND = 60

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 960·12/16 = 720 rpm

Teeth on gear D

ND = C·nC/nout = 24·720/288 = 60

Answer

ND = 60
17.Springs & pendulums

Answer: T = 3.108 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(2.4/9.81) = 3.108 s

Answer

T = 3.108 s
18.Springs & pendulums

Answer: E = 2.432 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(190/2.6) = 8.549 rad/s

Energy

E = ½·k·A² = ½·190·0.16² = 2.432 J

Answer

E = 2.432 J
19.Mechanical vibrations

Answer: ζ = 0.05303

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(10000·8) = 565.7 N·s/m

Damping ratio

ζ = c/cc = 30/565.7 = 0.05303

Answer

ζ = 0.05303

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: keq = 37.5 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/100 + 1/60 → keq = 100·60/(100 + 60) = 37.5 kN/m

Answer

keq = 37.5 kN/m

ExamProblems · examproblems.com/courses/dynamics