Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)1.1 s16.67

A driver moving at 60 km/h sees an obstacle. Her reaction time is 1.1 s, after which the car brakes with a constant deceleration of 8 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 60 km/htr = 1.1 sa = −8 m/s²
d = m
2.KinematicsHard
a = 24 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 24 m/s² for 1 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². How long after launch does it hit the ground? Find t.

a = 24 m/s²t1 = 1 sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 45°a = ?m = 8 kg

An 8 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 8 kgθ = 45°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 3.5 kg4 kgθ = 25°

A 3.5 kg block on a ramp at 25° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 4 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.25. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 3.5 kgm2 = 4 kgθ = 25°μ = 0.25g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 32 m/s25°range

A ball is launched at 25° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 32 m/sθ = 25°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 15 mv0​ = 18 m/s25°range

A ball is launched at 25° above horizontal from the top of a 15 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 18 m/sθ = 25°h = 15 mg = 9.81 m/s²
t = s
7.Circular motionMedium
θ = ?to centre50 km/h

A road engineer wants cars to take a curve of radius 200 m at 50 km/h without relying on friction. Use g = 9.81 m/s². Find the banking angle θ.

r = 200 mv = 50 km/hg = 9.81 m/s²
θ = °
8.Circular motionHard
r = 0.5 mv = 4.5 m/s

A 1.6 kg ball on a string 0.5 m long is swung in a vertical circle. At the lowest point it moves at 4.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.6 kgr = 0.5 mv = 4.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
35°d = 9 mμ = 0.4

A block slides from rest down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.4. Find its speed v after it has slid 9 m along the slope.

θ = 35°μ = 0.4d = 9 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 2.5 mL = 3 mμ = 0.25k = 500 N/m

A 10 kg block is released from rest at height 2.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3 m long (μ = 0.25) and then runs onto a spring (k = 500 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 10 kgh = 2.5 mL = 3 mμ = 0.25k = 500 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
12 kg45 m/s8 kgv′2​ = ?

A 20 kg projectile moving horizontally at 35 m/s explodes into two fragments that move along the same line. The 12 kg fragment continues forwards at 45 m/s. Find the velocity v′2 of the 8 kg fragment (positive in the original direction).

M = 20 kgu = 35 m/sm1 = 12 kgv′1 = 45 m/sm2 = 8 kg
v′2 = m/s
12.Momentum & collisionsHard
1700 kgv1​ = ?900 kg

A 1700 kg car runs into a parked 900 kg car. The wrecks lock together and skid 15 m before stopping. The coefficient of kinetic friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 1700 kgm2 = 900 kgd = 15 mμ = 0.7g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
n = 1800 rpmT = 180 N·m

A motor delivers a torque of 180 N·m at 1800 rpm. Find its power output P in kW.

T = 180 N·mn = 1800 rpm
P = kW
14.Rigid-body rotationHard
θ = 40°vs = 7 m

A thin hoop starts from rest and rolls without slipping down a slope inclined at 40° to the horizontal. Use g = 9.81 m/s². Its radius is 0.25 m. Find its angular velocity ω after it has rolled 7 m along the slope.

θ = 40°s = 7 mI = m·r²g = 9.81 m/s²r = 0.25 m
ω = rad/s
15.Gears & gear trainsMedium
N1​ = 16N2​ = 45

A 15 kW motor running at 1500 rpm drives a pinion with 16 teeth, which meshes with a gear with 45 teeth. The gear pair has an efficiency of 96%. Find the output torque T2 on the gear shaft.

P = 15 kWn1 = 1500 rpmN1 = 16N2 = 45η = 96%
T2 = N·m
16.Gears & gear trainsHard
A = 30B = 60C = 20D = 72

A 1.5 kW motor at 1440 rpm drives gear A (30 teeth), which meshes with gear B (60 teeth). Gear C (20 teeth) on the same shaft as B drives gear D (72 teeth) on the output shaft. Each gear mesh has an efficiency of 96%. Find the output torque Tout.

P = 1.5 kWnin = 1440 rpmA = 30B = 60C = 20D = 72ηmesh = 96%
Tout = N·m
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 1.3 s? Use g = 9.81 m/s². Find L.

T = 1.3 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
0.5 kgk = 310 N/m

A 0.5 kg mass is attached to the lower end of an unstretched vertical spring with k = 310 N/m and released from rest. Use g = 9.81 m/s². Find the greatest speed vmax of the mass.

m = 0.5 kgk = 310 N/mg = 9.81 m/s²
vmax = m/s
19.Mechanical vibrationsMedium
tx25 mm5 cycles1.1 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 25 mm is followed 5 cycles later by a peak of 1.1 mm. Find the damping ratio ζ.

x0 = 25 mmx5 = 1.1 mmn = 5
ζ =
20.Mechanical vibrationsHard
k1​ = 5k2​ = 40m = 5 kg

A 5 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 5 kN/m and the lower one k₂ = 40 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 5 kN/mk2 = 40 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 35.69 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 60/3.6 = 16.67 m/s

Reaction distance

d1 = v₀·tr = 16.67·1.1 = 18.33 m

Braking distance

d2 = v₀²/(2a) = 16.67²/(2·8) = 17.36 m

Total

d = 18.33 + 17.36 = 35.69 m

Answer

d = 35.69 m
2.Kinematics

Answer: t = 6.35 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 24·1 = 24 m/s
h₁ = ½·24·1² = 12 m

Free flight to the ground

Solve −h₁ = v₁·t₂ − ½·g·t₂² for the positive root.

t₂ = (24 + √(24² + 2·9.81·12))/9.81 = 5.35 s
t = 1 + 5.35 = 6.35 s

Answer

t = 6.35 s
3.Newton’s laws

Answer: a = 5.896 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 45° − 0.15·cos 45°) = 9.81·(0.7071 − 0.1061) = 5.896 m/s²

Answer

a = 5.896 m/s²
4.Newton’s laws

Answer: a = 2.26 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 39.24 N
m₁·g·sin θ = 14.51 N
μ·m₁·g·cos θ = 7.78 N

Acceleration of the system

a = (39.24 − 14.51 − 7.78)/7.5 = 2.26 m/s²

Answer

a = 2.26 m/s²
5.Projectile motion

Answer: t = 2.757 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 32·cos 25° = 29 m/s
vy = v0·sin θ = 32·sin 25° = 13.52 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·13.52/9.81 = 2.757 s

Answer

t = 2.757 s
6.Projectile motion

Answer: t = 2.688 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 18·cos 25° = 16.31 m/s
vy = v0·sin θ = 18·sin 25° = 7.607 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 15 + 7.607·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (7.607 + √(57.87 + 294.3))/9.81 = 2.688 s

Answer

t = 2.688 s
7.Circular motion

Answer: θ = 5.615 °

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Units

v = 50/3.6 = 13.89 m/s

Banking angle

tan θ = v²/(r·g) = 13.89²/(200·9.81) = 0.09832
θ = 5.615°

Answer

θ = 5.615°
8.Circular motion

Answer: T = 80.5 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.6·9.81 + 1.6·4.5²/0.5 = 15.7 + 64.8 = 80.5 N

Answer

T = 80.5 N
9.Work & energy

Answer: v = 6.59 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·9·(0.5736 − 0.4·0.8192)) = 6.59 m/s

Answer

v = 6.59 m/s
10.Work & energy

Answer: v = 5.86 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 98.1·(2.5 − 0.25·3) = 171.7 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·1.75) = 5.86 m/s

Answer

v = 5.86 m/s
11.Momentum & collisions

Answer: v′2 = 20 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 20·35 = 700 kg·m/s

Momentum after

700 = 12·45 + 8·v′2
v′2 = (700 − 540)/8 = 20 m/s

Answer

v′2 = 20 m/s
12.Momentum & collisions

Answer: v1 = 21.95 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.7·9.81·15) = 14.35 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 2600·14.35/1700 = 21.95 m/s

Answer

v1 = 21.95 m/s
(79.03 km/h)
13.Rigid-body rotation

Answer: P = 33.93 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1800/60 = 188.5 rad/s

Power

P = T·ω = 180·188.5 = 33929 W = 33.93 kW

Answer

P = 33.93 kW
14.Rigid-body rotation

Answer: ω = 26.58 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 7·sin 40° = 4.5 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 1)
v = √(2·9.81·4.5/2) = 6.644 m/s
ω = v/r = 6.644/0.25 = 26.58 rad/s

Answer

ω = 26.58 rad/s
15.Gears & gear trains

Answer: T2 = 257.8 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 15000/157.1 = 95.49 N·m

Output torque

T2 = 95.49·45/16·0.96 = 257.8 N·m

Answer

T2 = 257.8 N·m
16.Gears & gear trains

Answer: Tout = 66 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1440·(30/60)·(20/72) = 200 rpm
ωout = 2π·200/60 = 20.94 rad/s

Output power and torque

Pout = 1500·0.96² = 1382 W
Tout = Pout/ωout = 1382/20.94 = 66 N·m

Answer

Tout = 66 N·m
17.Springs & pendulums

Answer: L = 0.4199 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(1.3/2π)² = 0.4199 m

Answer

L = 0.4199 m
18.Springs & pendulums

Answer: vmax = 0.394 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 0.5·9.81/310 = 0.01582 m = A

Greatest speed

The speed is largest at equilibrium.

ω = √(310/0.5) = 24.9 rad/s
vmax = A·ω = 0.01582·24.9 = 0.394 m/s

Answer

vmax = 0.394 m/s
19.Mechanical vibrations

Answer: ζ = 0.09894

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/5)·ln(25/1.1) = 0.6247

Damping ratio

ζ = δ/√(4π² + δ²) = 0.6247/√(39.48 + 0.3903) = 0.09894

Answer

ζ = 0.09894
20.Mechanical vibrations

Answer: fn = 4.745 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/5 + 1/40 → keq = 5·40/(5 + 40) = 4.444 kN/m

Natural frequency

ωn = √(4444/5) = 29.81 rad/s
fn = 29.81/(2π) = 4.745 Hz

Answer

fn = 4.745 Hz

ExamProblems · examproblems.com/courses/dynamics