Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)3.472 s27.78

A car driving at 100 km/h brakes with a constant deceleration of 8 m/s² until it stops. Find the braking distance s.

v₀ = 100 km/ha = −8 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 16 m/s5 m

A ball is thrown straight up at 16 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 16 m/sh₀ = 5 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
30 kg35°F = 170 Nμ = 0.1

A 30 kg sled is pulled across level snow by a rope at 35° above the horizontal with a force of 170 N. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the sled.

m = 30 kgF = 170 Nθ = 35°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
7 kg3 kgTF = 110 Nμ = 0.3

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 110 N pulls the front 3 kg block; the 7 kg block is towed behind. The coefficient of kinetic friction is 0.3 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.

m1 = 7 kgm2 = 3 kgF = 110 Nμ = 0.3g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
37 my = ?v0​ = 28 m/s25°

A ball is kicked from level ground at 28 m/s and 25° above the horizontal towards a wall 37 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 28 m/sθ = 25°x = 37 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 5 mv0​ = 19 m/s25°range

A ball is launched at 25° above horizontal from the top of a 5 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 19 m/sθ = 25°h = 5 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 125 mvmax​ = ?

A car takes a flat curve of radius 125 m. The coefficient of static friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 125 mμs = 0.5g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.4 m9 m/svtop​ = ?

A 1.8 kg ball on a light string 1.4 m long is swung in a vertical circle. At the lowest point its speed is 9 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 1.8 kgr = 1.4 mvbottom = 9 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
54 km/h8°1000 kg

A 1000 kg car drives up an 8° slope at a constant 54 km/h. Air resistance and rolling resistance together amount to 400 N. Find the power P the wheels must deliver, in kW.

m = 1000 kgθ = 8°Fr = 400 Nv = 54 km/hg = 9.81 m/s²
P = kW
10.Work & energyHard
h = 3 mL = 4 mμ = 0.15k = 1000 N/m

A 2.5 kg block is released from rest at height 3 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4 m long (μ = 0.15) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 2.5 kgh = 3 mL = 4 mμ = 0.15k = 1000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
800 kg11 m/s1300 kg

An 800 kg car moving at 11 m/s runs into a stationary 1300 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 800 kgv1 = 11 m/sm2 = 1300 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
23 m/s19 m/s

A 0.2 kg ball hits a wall at 23 m/s and bounces straight back at 19 m/s. The contact lasts 25 ms. Find the average force Favg of the wall on the ball.

m = 0.2 kgvin = 23 m/svout = 19 m/sΔt = 25 ms
Favg = N
13.Rigid-body rotationMedium
n = 600 rpmTb​ = 75 N·mI = 15 kg·m²

A flywheel with a moment of inertia of 15 kg·m² spins at 600 rpm. A brake applies a constant friction torque of 75 N·m. How many revolutions N does the flywheel make before it stops?

I = 15 kg·m²n = 600 rpmTb = 75 N·m
N = rev
14.Rigid-body rotationHard
1 m/sω

A hollow sphere of mass 10.5 kg rolls without slipping at 1 m/s. Find its total kinetic energy Ek.

m = 10.5 kgv = 1 m/sI = (2/3)·m·r²
Ek = J
15.Gears & gear trainsMedium
Tw​ = ?z = 2, 1450 rpm

A 2.2 kW motor at 1450 rpm drives a worm with 2 start(s). The worm wheel has 60 teeth and the drive has an efficiency of 75%. Find the output torque Tw on the wheel shaft.

z = 2Nw = 60n = 1450 rpmP = 2.2 kWη = 75%
Tw = N·m
16.Gears & gear trainsHard
A = 30B = 40C = 40D = 72

In a compound gear train, gear A (30 teeth) on the input shaft turning at 3000 rpm drives gear B (40 teeth). Gear C (40 teeth) is fixed to the same shaft as B and drives gear D (72 teeth) on the output shaft. Find the output speed nout.

nin = 3000 rpmA = 30B = 40C = 40D = 72
nout = rpm
17.Springs & pendulumsMedium
L = 1 m

A simple pendulum has a length of 1 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 1 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
3.8 kgk = 410 N/mA = 5 cm

A 3.8 kg mass on a spring with k = 410 N/m is pulled 5 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 3.8 kgk = 410 N/mA = 5 cm
E = J
19.Mechanical vibrationsMedium
k = 15 kN/mζ = 0.3m = 2 kg

A 2 kg mass on a spring with a stiffness of 15 kN/m has a viscous damper giving a damping ratio of 0.3. Find the damped natural frequency fd of its free vibration in Hz.

m = 2 kgk = 15 kN/mζ = 0.3
fd = Hz
20.Mechanical vibrationsHard
k1​ = 50k2​ = 50m = 5 kg

A 5 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 50 kN/m and the lower one k₂ = 50 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 5 kgk1 = 50 kN/mk2 = 50 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: s = 48.23 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 100/3.6 = 27.78 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 27.78²/(2·8) = 48.23 m

Answer

s = 48.23 m
2.Kinematics

Answer: hmax = 18.05 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 16²/(2·9.81) = 13.05 m

Height above the ground

hmax = 5 + 13.05 = 18.05 m

Answer

hmax = 18.05 m
3.Newton’s laws

Answer: a = 3.986 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Normal force

N = m·g − F·sin θ = 294.3 − 170·sin 35° = 196.8 N

Horizontal forces

m·a = F·cos θ − μ·N = 139.3 − 19.68
a = 119.6/30 = 3.986 m/s²

Answer

a = 3.986 m/s²
4.Newton’s laws

Answer: a = 8.057 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (110 − 29.43)/10 = 8.057 m/s²

Answer

a = 8.057 m/s²
5.Projectile motion

Answer: y = 6.826 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 28·cos 25° = 25.38 m/s
t = x/vx = 37/25.38 = 1.458 s

Height at that time

y = 11.83·1.458 − ½·9.81·1.458² = 6.826 m

Answer

y = 6.826 m

The ball is already on its way down at the wall.

6.Projectile motion

Answer: t = 2.118 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 19·cos 25° = 17.22 m/s
vy = v0·sin θ = 19·sin 25° = 8.03 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 5 + 8.03·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (8.03 + √(64.48 + 98.1))/9.81 = 2.118 s

Answer

t = 2.118 s
7.Circular motion

Answer: vmax = 24.76 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.5·9.81·125) = 24.76 m/s

Answer

vmax = 24.76 m/s (89.14 km/h)
8.Circular motion

Answer: Ttop = 15.85 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 9² − 4·9.81·1.4 = 26.06 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 1.8·26.06/1.4 − 1.8·9.81 = 15.85 N

Answer

Ttop = 15.85 N
9.Work & energy

Answer: P = 26.48 kW

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.

Driving force

m·g = 1000·9.81 = 9810 N
mg·sin θ = 9810·sin 8° = 1365 N
F = 1365 + 400 = 1765 N

Power

v = 54/3.6 = 15 m/s
P = F·v = 1765·15 = 26479 W = 26.48 kW

Answer

P = 26.48 kW
10.Work & energy

Answer: x = 34.31 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 24.53·(3 − 0.15·4) = 58.86 J

Maximum compression

½kx² = 58.86 → x = √(2·58.86/1000) = 0.3431 m = 34.31 cm

Answer

x = 34.31 cm
11.Momentum & collisions

Answer: ΔK = 29962 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 800·11/2100 = 4.19 m/s

Kinetic energy before and after

Kbefore = ½·800·11² = 48400 J
Kafter = ½·2100·4.19² = 18438 J

Energy lost

ΔK = 48400 − 18438 = 29962 J

Answer

ΔK = 29962 J

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: Favg = 336 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.2·(19 + 23) = 8.4 N·s

Average force

Favg = J/Δt = 8.4/0.025 = 336 N

Answer

Favg = 336 N
13.Rigid-body rotation

Answer: N = 62.83 rev

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·600/60 = 62.83 rad/s

Work of the brake equals the kinetic energy

½·I·ω² = ½·15·62.83² = 29609 J
θ = 29609/75 = 394.8 rad

Revolutions

N = θ/2π = 62.83 rev

Answer

N = 62.83 rev
14.Rigid-body rotation

Answer: Ek = 8.75 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·10.5·1² = 5.25 J
Erot = ½·I·ω² = ½·0.6667·m·r²·(v/r)² = 0.6667·5.25 = 3.5 J

Total

Ek = 5.25 + 3.5 = 8.75 J

Answer

Ek = 8.75 J
15.Gears & gear trains

Answer: Tw = 326 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 1450·2/60 = 48.33 rpm

Output torque

ωw = 2π·48.33/60 = 5.061 rad/s
Tw = η·P/ωw = 0.75·2200/5.061 = 326 N·m

Answer

Tw = 326 N·m
16.Gears & gear trains

Answer: nout = 1250 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 3000·30/40 = 2250 rpm = nC

Second stage

nout = 2250·40/72 = 1250 rpm

Answer

nout = 1250 rpm

total ratio = 2.4 : 1

17.Springs & pendulums

Answer: T = 2.006 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(1/9.81) = 2.006 s

Answer

T = 2.006 s
18.Springs & pendulums

Answer: E = 0.5125 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(410/3.8) = 10.39 rad/s

Energy

E = ½·k·A² = ½·410·0.05² = 0.5125 J

Answer

E = 0.5125 J
19.Mechanical vibrations

Answer: fd = 13.15 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(15000/2) = 86.6 rad/s
fn = 86.6/(2π) = 13.78 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 13.78·√(1 − 0.3²) = 13.15 Hz

Answer

fd = 13.15 Hz
20.Mechanical vibrations

Answer: keq = 25 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/50 + 1/50 → keq = 50·50/(50 + 50) = 25 kN/m

Answer

keq = 25 kN/m

ExamProblems · examproblems.com/courses/dynamics