In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 120 km/h brakes with a constant deceleration of 7 m/s² until it stops. How long does braking take? Find t.
v₀ = 120 km/ha = −7 m/s²v = 0
t = s
2.KinematicsHard
A ball is thrown straight up at 15 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 15 m/sh₀ = 25 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 7 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 7 kgθ = 20°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 10 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 6 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 10 kgm2 = 6 kgμ = 0g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 20° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 30 m/sθ = 20°g = 9.81 m/s²
x = m
6.Projectile motionHard
A ball is thrown from ground level at 28 m/s and 70° above the horizontal. It lands on the flat roof of a building 15 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.
v₀ = 28 m/sθ = 70°hroof = 15 mg = 9.81 m/s²
x = m
7.Circular motionMedium
A car takes a flat curve of radius 40 m. The coefficient of static friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 40 mμs = 0.5g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A curve of radius 40 m is banked at 15°, and the coefficient of static friction between tyres and road is 0.2. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.
r = 40 mθ = 15°μs = 0.2g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
A 4 kg block slides 7 m down a slope at 30° to the horizontal, with a coefficient of kinetic friction of 0.2. Find the work Wf done against friction.
m = 4 kgθ = 30°μ = 0.2d = 7 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
A 10 kg block is released from rest at height 3 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2.5 m long (μ = 0.2) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 10 kgh = 3 mL = 2.5 mμ = 0.2k = 1000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
A 12 kg projectile moving horizontally at 15 m/s explodes into two fragments that move along the same line. The 2 kg fragment continues forwards at 51 m/s. Find the velocity v′2 of the 10 kg fragment (positive in the original direction).
M = 12 kgu = 15 m/sm1 = 2 kgv′1 = 51 m/sm2 = 10 kg
v′2 = m/s
12.Momentum & collisionsHard
A 0.4 kg ball hits a wall at 10 m/s and bounces straight back at 16 m/s. The contact lasts 40 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.4 kgvin = 10 m/svout = 16 m/sΔt = 40 ms
J = N·s
13.Rigid-body rotationMedium
A 14 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 18.5 kg and radius 0.35 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the tension T in the cord.
m = 14 kgM = 18.5 kgR = 0.35 mg = 9.81 m/s²
T = N
14.Rigid-body rotationHard
A solid sphere rolls without slipping down a slope inclined at 15° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of its centre.
θ = 15°I = (2/5)·m·r²g = 9.81 m/s²
a = m/s²
15.Gears & gear trainsMedium
A belt runs on a 200 mm driving pulley at 1500 rpm. The tension is 600 N on the tight side and 300 N on the slack side. Find the power P transmitted, in kW.
d1 = 200 mmn1 = 1500 rpmT1 = 600 NT2 = 300 N
P = kW
16.Gears & gear trainsHard
In a compound gear train, gear A (30 teeth) on the input shaft turning at 3000 rpm drives gear B (48 teeth). Gear C (45 teeth) is fixed to the same shaft as B and drives gear D (72 teeth) on the output shaft. Find the output speed nout.
nin = 3000 rpmA = 30B = 48C = 45D = 72
nout = rpm
17.Springs & pendulumsMedium
How long must a simple pendulum be to have a period of 2.7 s? Use g = 9.81 m/s². Find L.
T = 2.7 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
A 2.4 kg mass on a spring with k = 500 N/m is pulled 3 cm from equilibrium and released. Find its maximum acceleration amax.
m = 2.4 kgk = 500 N/mA = 3 cm
amax = m/s²
19.Mechanical vibrationsMedium
A 2 kg mass is supported by a spring with a stiffness of 80 kN/m and a viscous damper with a damping coefficient of 80 N·s/m. Find the damping ratio ζ.
m = 2 kgk = 80 kN/mc = 80 N·s/m
ζ =
20.Mechanical vibrationsHard
A 25 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 30 kN/m and k₂ = 25 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 25 kgk1 = 30 kN/mk2 = 25 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: t = 4.762 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 120/3.6 = 33.33 m/s
Braking time
0 = v₀ − a·t → t = v₀/a = 33.33/7 = 4.762 s
Answer
t = 4.762 s
2.Kinematics
Answer: t = 4.256 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−25 = 15·t − ½·9.81·t²
4.905·t² − 15·t − 25 = 0
Solve the quadratic
Only the positive root is physical.
t = (15 + √(15² + 2·9.81·25))/9.81 = 4.256 s
Answer
t = 4.256 s
3.Newton’s laws
Answer: a = 1.051 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 30·cos 20° = 28.19 m/s
vy = v0·sin θ = 30·sin 20° = 10.26 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·10.26/9.81 = 2.092 s
Horizontal distance
x = vx·t = 28.19·2.092 = 58.97 m
Answer
x = 58.97 m
6.Projectile motion
Answer: x = 45.16 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 9.577 m/s, vy = 26.31 m/s
Time to land on the roof
Larger root: the ball is descending.
15 = 26.31·t − 4.905·t²
t = (26.31 + √(26.31² − 2·9.81·15))/9.81 = 4.716 s
Horizontal distance
x = vx·t = 9.577·4.716 = 45.16 m
Answer
x = 45.16 m
7.Circular motion
Answer: vmax = 14.01 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.5·9.81·40) = 14.01 m/s
Answer
vmax = 14.01 m/s (50.43 km/h)
8.Circular motion
Answer: vmax = 13.93 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Force balances
Friction points down the slope.
N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g
Speed
v = √(40·9.81·0.452/0.9142) = 13.93 m/s
Answer
vmax = 13.93 m/s
(50.14 km/h)
9.Work & energy
Answer: Wf = 47.58 J
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Friction force
N = mg·cos θ = 39.24·0.866 = 33.98 N
F = μN = 0.2·33.98 = 6.797 N
Work against friction
Wf = F·d = 6.797·7 = 47.58 J
Answer
Wf = 47.58 J
10.Work & energy
Answer: x = 70.04 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 98.1·(3 − 0.2·2.5) = 245.3 J
Maximum compression
½kx² = 245.3 → x = √(2·245.3/1000) = 0.7004 m = 70.04 cm
Answer
x = 70.04 cm
11.Momentum & collisions
Answer: v′2 = 7.8 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum before
p = M·u = 12·15 = 180 kg·m/s
Momentum after
180 = 2·51 + 10·v′2
v′2 = (180 − 102)/10 = 7.8 m/s
Answer
v′2 = 7.8 m/s
12.Momentum & collisions
Answer: J = 10.4 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.4·(16 + 10) = 10.4 N·s
Answer
J = 10.4 N·s
13.Rigid-body rotation
Answer: T = 54.64 N
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Equations of motion
m·g·sin θ − f = m·a
f·r = I·α = 0.4·m·r²·(a/r) → f = 0.4·m·a
Acceleration
a = g·sin θ/(1 + c) = 9.81·sin 15°/1.4 = 1.814 m/s²
Answer
a = 1.814 m/s²
15.Gears & gear trains
Answer: P = 4.712 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt speed
v = 15.71 m/s
Power
P = (600 − 300)·15.71 = 4712 W = 4.712 kW
Answer
P = 4.712 kW
16.Gears & gear trains
Answer: nout = 1172 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
First stage
nB = 3000·30/48 = 1875 rpm = nC
Second stage
nout = 1875·45/72 = 1172 rpm
Answer
nout = 1172 rpm
total ratio = 2.56 : 1
17.Springs & pendulums
Answer: L = 1.811 m
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for the length
L = g·(T/2π)² = 9.81·(2.7/2π)² = 1.811 m
Answer
L = 1.811 m
18.Springs & pendulums
Answer: amax = 6.25 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(500/2.4) = 14.43 rad/s
Maximum acceleration
amax = A·ω² = 0.03·14.43² = 6.25 m/s²
Answer
amax = 6.25 m/s²
19.Mechanical vibrations
Answer: ζ = 0.1
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(80000·2) = 800 N·s/m
Damping ratio
ζ = c/cc = 80/800 = 0.1
Answer
ζ = 0.1
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 7.465 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.