Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)1.3 s22.22

A driver moving at 80 km/h sees an obstacle. Her reaction time is 1.3 s, after which the car brakes with a constant deceleration of 7 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 80 km/htr = 1.3 sa = −7 m/s²
d = m
2.KinematicsHard
v₀ = 11 m/s5 m

A ball is thrown straight up at 11 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 11 m/sh₀ = 5 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 30°a = ?m = 5 kg

A 5 kg block slides down a frictionless slope at 30° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 5 kgθ = 30°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 1 kg8.5 kgθ = 35°

A 1 kg block on a ramp at 35° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 8.5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 1 kgm2 = 8.5 kgθ = 35°μ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
112 my = ?v0​ = 40 m/s40°

A ball is kicked from level ground at 40 m/s and 40° above the horizontal towards a wall 112 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 40 m/sθ = 40°x = 112 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 45 mv0​ = 19 m/s40°α = ?

A ball is launched at 19 m/s and 40° above the horizontal from the top of a 45 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?

v₀ = 19 m/sθ = 40°h = 45 mg = 9.81 m/s²
α = °
7.Circular motionMedium
r = 60 mvmax​ = ?

A car takes a flat curve of radius 60 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 60 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.1 mv = ?

A ball on a string 1.1 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 1.1 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
20°d = 14 mμ = 0.2

A 2 kg block slides 14 m down a slope at 20° to the horizontal, with a coefficient of kinetic friction of 0.2. Find the work Wf done against friction.

m = 2 kgθ = 20°μ = 0.2d = 14 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 4 mL = 2.5 mμ = 0.2k = 800 N/m

A 4 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2.5 m long (μ = 0.2) and then runs onto a spring (k = 800 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 4 kgh = 4 mL = 2.5 mμ = 0.2k = 800 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
1700 kg21 m/s2000 kg

A 1700 kg car moving at 21 m/s runs into a stationary 2000 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?

m1 = 1700 kgv1 = 21 m/sm2 = 2000 kgv2 = 0
ΔK/K = %
12.Momentum & collisionsHard
4 kgv = ?8 g40°L = 1.4 m

An 8 g bullet is fired horizontally into a 4 kg block hanging from light strings 1.4 m long, and stays in it. The strings swing out to a largest angle of 40° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 8 gM = 4 kgL = 1.4 mθ = 40°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
n = 500 rpmP = 39 kW

A shaft transmits 39 kW at 500 rpm. Find the torque T in the shaft.

P = 39 kWn = 500 rpm
T = N·m
14.Rigid-body rotationHard
240 m/s20 g0.48 mL = 1.2 m3.5 kgφ

A uniform slender rod of mass 3.5 kg and length 1.2 m hangs at rest from a frictionless pivot at its top end. A 20 g bullet moving horizontally at 240 m/s hits the rod 0.48 m below the pivot and stays embedded. Use g = 9.81 m/s². Find the largest angle φ from the vertical through which the rod swings.

M = 3.5 kgL = 1.2 mm = 20 gv = 240 m/sd = 0.48 mg = 9.81 m/s²
φ = °
15.Gears & gear trainsMedium
N1​ = 30, m = 4 mm

A 1.1 kW motor running at 2900 rpm drives a pinion with 30 teeth and a module of 4 mm. Find the tangential force Ft on the pinion teeth.

P = 1.1 kWn = 2900 rpmN1 = 30m = 4 mm
Ft = N
16.Gears & gear trainsHard
A = 48B = 72C = 12D = 45

In a compound gear train, gear A (48 teeth) on the input shaft turning at 3000 rpm drives gear B (72 teeth). Gear C (12 teeth) is fixed to the same shaft as B and drives gear D (45 teeth) on the output shaft. Find the output speed nout.

nin = 3000 rpmA = 48B = 72C = 12D = 45
nout = rpm
17.Springs & pendulumsMedium
L = 1.9 mT = 6.8 s

An astronaut on another planet finds that a simple pendulum 1.9 m long has a period of 6.8 s for small swings. Find the gravitational acceleration g on that planet.

L = 1.9 mT = 6.8 s
g = m/s²
18.Springs & pendulumsHard
0.6 kgk = 390 N/mA = 10 cm

A 0.6 kg mass on a spring with k = 390 N/m is pulled 10 cm from equilibrium and released. Find its maximum speed vmax.

m = 0.6 kgk = 390 N/mA = 10 cm
vmax = m/s
19.Mechanical vibrationsMedium
k = 50 kN/mζ = 0.6m = 25 kg

A 25 kg mass on a spring with a stiffness of 50 kN/m has a viscous damper giving a damping ratio of 0.6. Find the damped natural frequency fd of its free vibration in Hz.

m = 25 kgk = 50 kN/mζ = 0.6
fd = Hz
20.Mechanical vibrationsHard
k1​ = 60k2​ = 100k3​ = 100m = 25 kg

A 25 kg mass hangs from spring k₃ = 100 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 60 kN/m and k₂ = 100 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 60 kN/mk2 = 100 kN/mk3 = 100 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 64.16 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 80/3.6 = 22.22 m/s

Reaction distance

d1 = v₀·tr = 22.22·1.3 = 28.89 m

Braking distance

d2 = v₀²/(2a) = 22.22²/(2·7) = 35.27 m

Total

d = 28.89 + 35.27 = 64.16 m

Answer

d = 64.16 m
2.Kinematics

Answer: t = 2.63 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−5 = 11·t − ½·9.81·t²
4.905·t² − 11·t − 5 = 0

Solve the quadratic

Only the positive root is physical.

t = (11 + √(11² + 2·9.81·5))/9.81 = 2.63 s

Answer

t = 2.63 s
3.Newton’s laws

Answer: a = 4.905 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 30° − 0·cos 30°) = 9.81·(0.5 − 0) = 4.905 m/s²

Answer

a = 4.905 m/s²
4.Newton’s laws

Answer: a = 8.1 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 83.39 N
m₁·g·sin θ = 5.627 N
μ·m₁·g·cos θ = 0.8036 N

Acceleration of the system

a = (83.39 − 5.627 − 0.8036)/9.5 = 8.1 m/s²

Answer

a = 8.1 m/s²
5.Projectile motion

Answer: y = 28.45 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 40·cos 40° = 30.64 m/s
t = x/vx = 112/30.64 = 3.655 s

Height at that time

y = 25.71·3.655 − ½·9.81·3.655² = 28.45 m

Answer

y = 28.45 m

The ball is already on its way down at the wall.

6.Projectile motion

Answer: α = 65.63 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 19·cos 40° = 14.55 m/s
vy0 = 19·sin 40° = 12.21 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(12.21² + 2·9.81·45) = 32.13 m/s

Impact angle

tan α = vy/vx = 32.13/14.55 → α = 65.63°

Answer

α = 65.63°
7.Circular motion

Answer: vmax = 20.3 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·60) = 20.3 m/s

Answer

vmax = 20.3 m/s (73.07 km/h)
8.Circular motion

Answer: vmin = 3.285 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·1.1) = 3.285 m/s

Answer

vmin = 3.285 m/s
9.Work & energy

Answer: Wf = 51.62 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 19.62·0.9397 = 18.44 N
F = μN = 0.2·18.44 = 3.687 N

Work against friction

Wf = F·d = 3.687·14 = 51.62 J

Answer

Wf = 51.62 J
10.Work & energy

Answer: x = 58.6 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 39.24·(4 − 0.2·2.5) = 137.3 J

Maximum compression

½kx² = 137.3 → x = √(2·137.3/800) = 0.586 m = 58.6 cm

Answer

x = 58.6 cm
11.Momentum & collisions

Answer: ΔK/K = 54.05 %

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1700·21/3700 = 9.649 m/s

Kinetic energy before and after

Kbefore = ½·1700·21² = 374850 J
Kafter = ½·3700·9.649² = 172228 J

Fraction lost

ΔK/K = 202622/374850 = 54.05 %

Answer

ΔK/K = 54.05 %

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: v = 1270 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.4·(1 − cos 40°) = 0.3275 m

Speed after impact

V = √(2·9.81·0.3275) = 2.535 m/s

Collision

v = (m + M)·V/m = 4.008·2.535/0.008 = 1270 m/s

Answer

v = 1270 m/s
13.Rigid-body rotation

Answer: T = 744.8 N·m

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·500/60 = 52.36 rad/s

Torque

T = P/ω = 39000/52.36 = 744.8 N·m

Answer

T = 744.8 N·m
14.Rigid-body rotation

Answer: φ = 22.5 °

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 3.5·1.2²/3 + 0.02·0.48² = 1.685 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.02·240·0.48/1.685 = 1.368 rad/s

Energy during the swing

½·I·ω² = ½·1.685·1.368² = 1.576 J
(M·g·L/2 + m·g·d)·(1 − cos φ) = 20.7·(1 − cos φ)
cos φ = 1 − 1.576/20.7 = 0.9239 → φ = 22.5°

Answer

φ = 22.5°
15.Gears & gear trains

Answer: Ft = 60.37 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·2900/60 = 303.7 rad/s
T = P/ω = 1100/303.7 = 3.622 N·m

Pitch diameter

d = m·N = 4·30 = 120 mm

Tangential force

Ft = 2T/d = 2·3.622/0.12 = 60.37 N

Answer

Ft = 60.37 N
16.Gears & gear trains

Answer: nout = 533.3 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 3000·48/72 = 2000 rpm = nC

Second stage

nout = 2000·12/45 = 533.3 rpm

Answer

nout = 533.3 rpm

total ratio = 5.625 : 1

17.Springs & pendulums

Answer: g = 1.622 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for g

g = 4π²·L/T² = 4π²·1.9/6.8² = 1.622 m/s²

Answer

g = 1.622 m/s²
18.Springs & pendulums

Answer: vmax = 2.55 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(390/0.6) = 25.5 rad/s

Maximum speed

vmax = A·ω = 0.1·25.5 = 2.55 m/s

Answer

vmax = 2.55 m/s
19.Mechanical vibrations

Answer: fd = 5.694 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(50000/25) = 44.72 rad/s
fn = 44.72/(2π) = 7.118 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 7.118·√(1 − 0.6²) = 5.694 Hz

Answer

fd = 5.694 Hz
20.Mechanical vibrations

Answer: fn = 7.896 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 60 + 100 = 160 kN/m
keq = 160·100/(160 + 100) = 61.54 kN/m

Natural frequency

ωn = √(61538/25) = 49.61 rad/s
fn = 49.61/(2π) = 7.896 Hz

Answer

fn = 7.896 Hz

ExamProblems · examproblems.com/courses/dynamics