Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = ?s = 1900 m

A plane needs a speed of 180 km/h to take off and the usable runway is 1900 m long. Starting from rest, what constant acceleration a does it need?

v₀ = 0v = 180 km/hs = 1900 m
a = m/s²
2.KinematicsHard
v₀ = 8 m/s40 m

A ball is thrown straight up at 8 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 8 m/sh₀ = 40 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
boxv₀ = 4.5 m/sμ = ?

A box slides across a level floor with an initial speed of 4.5 m/s and comes to rest after 2.6 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 4.5 m/sd = 2.6 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
m1​ = 9.5 kg5.5 kgθ = 25°

A 9.5 kg block on a ramp at 25° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 5.5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 9.5 kgm2 = 5.5 kgθ = 25°μ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = ?55°R = 150 m

A ball is launched from level ground at 55° above the horizontal and lands 150 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 55°R = 150 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 55 mv0​ = 18 m/s25°x = ?

A ball is launched at 25° above horizontal from the top of a 55 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 18 m/sθ = 25°h = 55 mg = 9.81 m/s²
x = m
7.Circular motionMedium
θ = ?to centre50 km/h

A road engineer wants cars to take a curve of radius 110 m at 50 km/h without relying on friction. Use g = 9.81 m/s². Find the banking angle θ.

r = 110 mv = 50 km/hg = 9.81 m/s²
θ = °
8.Circular motionHard
θ = 30°to centrevmax​ = ?

A curve of radius 220 m is banked at 30°, and the coefficient of static friction between tyres and road is 0.1. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.

r = 220 mθ = 30°μs = 0.1g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
45°d = 17 mμ = 0.25

A 4 kg block slides 17 m down a slope at 45° to the horizontal, with a coefficient of kinetic friction of 0.25. Find the work Wf done against friction.

m = 4 kgθ = 45°μ = 0.25d = 17 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
F = 100 N35°μ = 0.310 kg

A 10 kg block starts from rest at the bottom of a 35° slope and is pulled up the slope by a constant force of 100 N parallel to the slope. The coefficient of kinetic friction is 0.3. Find the speed v of the block after it has moved 9 m up the slope.

m = 10 kgF = 100 Nθ = 35°μ = 0.3d = 9 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
5 kg3 m/s2 kg

A 5 kg glider moving at 3 m/s makes a perfectly elastic head-on collision with a 2 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 5 kgm2 = 2 kgv1 = 3 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
5 kgv = ?10 g35°L = 0.8 m

A 10 g bullet is fired horizontally into a 5 kg block hanging from light strings 0.8 m long, and stays in it. The strings swing out to a largest angle of 35° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 10 gM = 5 kgL = 0.8 mθ = 35°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
L = 2.7 mm = 9.5 kgα

A uniform slender rod of mass 9.5 kg and length 2.7 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 9.5 kgL = 2.7 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
θ = 15°a

A hollow sphere rolls without slipping down a slope inclined at 15° to the horizontal. Use g = 9.81 m/s². Find the smallest coefficient of static friction μs that prevents it from slipping.

θ = 15°I = (2/3)·m·r²g = 9.81 m/s²
μs =
15.Gears & gear trainsMedium
d1​ = 150 mmd2​ = 500 mm1500 rpmn2​ = ?

A 150 mm pulley at 1500 rpm drives a 500 mm pulley by a belt with 4 % slip. Find the speed n2 of the driven pulley.

n1 = 1500 rpmd1 = 150 mmd2 = 500 mms = 4 %
n2 = rpm
16.Gears & gear trainsHard
Ns​ = 16ring fixedNp​ = 12nc​ = ?

In a planetary gear set the sun gear has 16 teeth and each planet gear has 12 teeth. The ring gear is held fixed and the sun is driven at 900 rpm. Find the speed nc of the planet carrier.

Ns = 16Np = 12ns = 900 rpm
nc = rpm
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 1.9 s? Use g = 9.81 m/s². Find L.

T = 1.9 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
0.2 kgk = 70 N/m

A 0.2 kg mass is attached to the lower end of an unstretched vertical spring with k = 70 N/m and released from rest. Use g = 9.81 m/s². Find the greatest extension xmax of the spring in cm.

m = 0.2 kgk = 70 N/mg = 9.81 m/s²
xmax = cm
19.Mechanical vibrationsMedium
tx30 mm5 cycles2.4 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 30 mm is followed 5 cycles later by a peak of 2.4 mm. Find the damping ratio ζ.

x0 = 30 mmx5 = 2.4 mmn = 5
ζ =
20.Mechanical vibrationsHard
k1​ = 10k2​ = 40k3​ = 50m = 5 kg

A 5 kg mass hangs from spring k₃ = 50 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 10 kN/m and k₂ = 40 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 10 kN/mk2 = 40 kN/mk3 = 50 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: a = 0.6579 m/s²

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v = 180/3.6 = 50 m/s

Acceleration

a = v²/(2s) = 50²/(2·1900) = 0.6579 m/s²

Answer

a = 0.6579 m/s²
2.Kinematics

Answer: hmax = 43.26 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 8²/(2·9.81) = 3.262 m

Height above the ground

hmax = 40 + 3.262 = 43.26 m

Answer

hmax = 43.26 m
3.Newton’s laws

Answer: μ = 0.397

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 4.5²/(2·2.6) = 3.894 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 3.894/9.81 = 0.397

Answer

μ = 0.397
4.Newton’s laws

Answer: a = 0.4082 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 53.96 N
m₁·g·sin θ = 39.39 N
μ·m₁·g·cos θ = 8.446 N

Acceleration of the system

a = (53.96 − 39.39 − 8.446)/15 = 0.4082 m/s²

Answer

a = 0.4082 m/s²
5.Projectile motion

Answer: v0 = 39.57 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·150/sin 110°) = 39.57 m/s

Answer

v0 = 39.57 m/s
6.Projectile motion

Answer: x = 68.72 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 18·cos 25° = 16.31 m/s
vy = v0·sin θ = 18·sin 25° = 7.607 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 55 + 7.607·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (7.607 + √(57.87 + 1079))/9.81 = 4.213 s

Horizontal distance

x = vx·t = 16.31·4.213 = 68.72 m

Answer

x = 68.72 m
7.Circular motion

Answer: θ = 10.14 °

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Units

v = 50/3.6 = 13.89 m/s

Banking angle

tan θ = v²/(r·g) = 13.89²/(110·9.81) = 0.1788
θ = 10.14°

Answer

θ = 10.14°
8.Circular motion

Answer: vmax = 39.39 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points down the slope.

N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g

Speed

v = √(220·9.81·0.5866/0.816) = 39.39 m/s

Answer

vmax = 39.39 m/s
(141.8 km/h)
9.Work & energy

Answer: Wf = 117.9 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 39.24·0.7071 = 27.75 N
F = μN = 0.25·27.75 = 6.937 N

Work against friction

Wf = F·d = 6.937·17 = 117.9 J

Answer

Wf = 117.9 J
10.Work & energy

Answer: v = 5.943 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 10·9.81 = 98.1 N
mg·sin θ = 56.27 N
μ·mg·cos θ = 24.11 N

Work–energy

½mv² = (100 − 80.38)·9 = 176.6 J
v = √(2·176.6/10) = 5.943 m/s

Answer

v = 5.943 m/s
11.Momentum & collisions

Answer: v′1 = 1.286 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (5 − 2)/(5 + 2)·3 = 1.286 m/s
v′2 = 2·5/(5 + 2)·3 = 4.286 m/s

Answer

v′1 = 1.286 m/s
12.Momentum & collisions

Answer: v = 844.1 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 0.8·(1 − cos 35°) = 0.1447 m

Speed after impact

V = √(2·9.81·0.1447) = 1.685 m/s

Collision

v = (m + M)·V/m = 5.01·1.685/0.01 = 844.1 m/s

Answer

v = 844.1 m/s
13.Rigid-body rotation

Answer: R = 23.3 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.7) = 5.45 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 9.5·(9.81 − 7.357) = 23.3 N

Answer

R = 23.3 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: μs = 0.1072

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.6667·m·r²·(a/r) → f = 0.6667·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 15°/1.667 = 1.523 m/s²

Friction needed

f = c·m·a ≤ μ·m·g·cos θ → μ ≥ c·tan θ/(1 + c)
μs = 0.6667·tan 15°/1.667 = 0.1072

Answer

μs = 0.1072
15.Gears & gear trains

Answer: n2 = 432 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1500·150/500 = 450 rpm

With slip

n2 = 450·0.96 = 432 rpm

Answer

n2 = 432 rpm
16.Gears & gear trains

Answer: nc = 257.1 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 16 + 2·12 = 40

Willis equation with the ring fixed

Set nr = 0 and solve for the carrier speed.

(900 − nc)/(0 − nc) = −40/16
nc = ns·Ns/(Ns + Nr) = 900·16/56 = 257.1 rpm

Answer

nc = 257.1 rpm

The carrier turns in the same direction as the sun.

17.Springs & pendulums

Answer: L = 0.897 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(1.9/2π)² = 0.897 m

Answer

L = 0.897 m
18.Springs & pendulums

Answer: xmax = 5.606 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 0.2·9.81/70 = 0.02803 m = A

Lowest point

xmax = 2A = 0.05606 m = 5.606 cm

Answer

xmax = 5.606 cm
19.Mechanical vibrations

Answer: ζ = 0.08014

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/5)·ln(30/2.4) = 0.5051

Damping ratio

ζ = δ/√(4π² + δ²) = 0.5051/√(39.48 + 0.2552) = 0.08014

Answer

ζ = 0.08014
20.Mechanical vibrations

Answer: fn = 11.25 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 10 + 40 = 50 kN/m
keq = 50·50/(50 + 50) = 25 kN/m

Natural frequency

ωn = √(25000/5) = 70.71 rad/s
fn = 70.71/(2π) = 11.25 Hz

Answer

fn = 11.25 Hz

ExamProblems · examproblems.com/courses/dynamics