Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)0.5 s33.33

A driver moving at 120 km/h sees an obstacle. Her reaction time is 0.5 s, after which the car brakes with a constant deceleration of 7 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 120 km/htr = 0.5 sa = −7 m/s²
d = m
2.KinematicsHard
v₀ = 7 m/s35 m

A ball is thrown straight up at 7 m/s from the edge of a roof 35 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 7 m/sh₀ = 35 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 35°a = ?m = 6 kg

A 6 kg block slides down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 6 kgθ = 35°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 9.5 kg2.5 kgμ = 0.2

A 9.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 2.5 kg mass. The coefficient of kinetic friction between block and table is 0.2. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 9.5 kgm2 = 2.5 kgμ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 16 m/sθ = ?R = 20 m

A ball is launched from level ground at 16 m/s and must land 20 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 16 m/sR = 20 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 45 mv0​ = 34 m/s40°x = ?

A ball is launched at 40° above horizontal from the top of a 45 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 34 m/sθ = 40°h = 45 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 2.5 mω = ?

In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 2.5 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.4. Use g = 9.81 m/s². Find the smallest angular speed ω in rad/s.

r = 2.5 mμs = 0.4g = 9.81 m/s²
ω = rad/s
8.Circular motionHard
R = 0.5 mh = 1.6 m

A 5 kg cart is released from rest at a height of 1.6 m on a frictionless track and runs through a vertical loop of radius 0.5 m. Use g = 9.81 m/s². Find the normal force Nbottom of the track on the cart at the bottom of the loop.

m = 5 kgh = 1.6 mR = 0.5 mg = 9.81 m/s²
Nbottom = N
9.Work & energyMedium
0.05 kgk = 500 N/mh = ?

A toy launcher has a vertical spring of stiffness 500 N/m. A 0.05 kg ball is placed on it and the spring is compressed by 10 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.

m = 0.05 kgk = 500 N/mx = 10 cmg = 9.81 m/s²
h = m
10.Work & energyHard
h = 3.5 mL = 1.5 mμ = 0.2k = 1000 N/m

A 10 kg block is released from rest at height 3.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.2) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 10 kgh = 3.5 mL = 1.5 mμ = 0.2k = 1000 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
5 kg4 m/s0.5 kg

A 5 kg glider moving at 4 m/s makes a perfectly elastic head-on collision with a 0.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 5 kgm2 = 0.5 kgv1 = 4 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
2.5 kgv = ?8 g30°L = 0.6 m

An 8 g bullet is fired horizontally into a 2.5 kg block hanging from light strings 0.6 m long, and stays in it. The strings swing out to a largest angle of 30° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 8 gM = 2.5 kgL = 0.6 mθ = 30°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
v = ?1.5 kgL = 0.8 mm = 5.5 kg

A uniform slender rod of mass 5.5 kg and length 0.8 m is pinned at one end and released from rest in a horizontal position. A small ball of mass 1.5 kg is fixed to its free end. Ignore friction and use g = 9.81 m/s². Find the speed v of the free end as the rod swings through the vertical position.

m = 5.5 kgL = 0.8 mmball = 1.5 kgg = 9.81 m/s²
v = m/s
14.Rigid-body rotationHard
5.5 m/sω

A hollow sphere of mass 18.5 kg rolls without slipping at 5.5 m/s. What percentage p of its total kinetic energy is rotational?

m = 18.5 kgv = 5.5 m/sI = (2/3)·m·r²
p = %
15.Gears & gear trainsMedium
d1​ = 80 mmd2​ = 450 mm960 rpmT1​ = 600 NT2​ = 120 NP = ?

A belt runs on an 80 mm driving pulley at 960 rpm. The tension is 600 N on the tight side and 120 N on the slack side. Find the power P transmitted, in kW.

d1 = 80 mmn1 = 960 rpmT1 = 600 NT2 = 120 N
P = kW
16.Gears & gear trainsHard
Ns​ = 20ring fixedNp​ = 18nc​ = ?

In a planetary gear set the sun gear has 20 teeth and each planet gear has 18 teeth. The ring gear is held fixed and the sun is driven at 1440 rpm. Find the speed nc of the planet carrier.

Ns = 20Np = 18ns = 1440 rpm
nc = rpm
17.Springs & pendulumsMedium
2.5 kgk = 110 N/mA = 12 cmx = 5 cm

A 2.5 kg mass on a spring with k = 110 N/m oscillates on a frictionless surface with an amplitude of 12 cm. Find its speed v when it is 5 cm from equilibrium.

m = 2.5 kgk = 110 N/mA = 12 cmx = 5 cm
v = m/s
18.Springs & pendulumsHard
3 kgk = 100 N/m

A 3 kg mass is attached to the lower end of an unstretched vertical spring with k = 100 N/m and released from rest. Use g = 9.81 m/s². Find the greatest extension xmax of the spring in cm.

m = 3 kgk = 100 N/mg = 9.81 m/s²
xmax = cm
19.Mechanical vibrationsMedium
k = 5 kN/mζ = 0.4m = 20 kg

A 20 kg mass on a spring with a stiffness of 5 kN/m has a viscous damper giving a damping ratio of 0.4. Find the damped natural frequency fd of its free vibration in Hz.

m = 20 kgk = 5 kN/mζ = 0.4
fd = Hz
20.Mechanical vibrationsHard
k1​ = 15k2​ = 15m = 25 kg

A 25 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 15 kN/m and the lower one k₂ = 15 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 25 kgk1 = 15 kN/mk2 = 15 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: d = 96.03 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 120/3.6 = 33.33 m/s

Reaction distance

d1 = v₀·tr = 33.33·0.5 = 16.67 m

Braking distance

d2 = v₀²/(2a) = 33.33²/(2·7) = 79.37 m

Total

d = 16.67 + 79.37 = 96.03 m

Answer

d = 96.03 m
2.Kinematics

Answer: t = 3.478 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−35 = 7·t − ½·9.81·t²
4.905·t² − 7·t − 35 = 0

Solve the quadratic

Only the positive root is physical.

t = (7 + √(7² + 2·9.81·35))/9.81 = 3.478 s

Answer

t = 3.478 s
3.Newton’s laws

Answer: a = 3.216 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 35° − 0.3·cos 35°) = 9.81·(0.5736 − 0.2457) = 3.216 m/s²

Answer

a = 3.216 m/s²
4.Newton’s laws

Answer: T = 23.3 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (24.53 − 18.64)/12 = 0.4905 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 9.5·0.4905 + 18.64 = 23.3 N

Answer

T = 23.3 N
5.Projectile motion

Answer: θ = 25.02 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·20/16² = 0.7664

Angle

2θ = 50.03° → θ = 25.02°

Answer

θ = 25.02°

The other solution is 90° − θ = 64.98°.

6.Projectile motion

Answer: x = 156 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 34·cos 40° = 26.05 m/s
vy = v0·sin θ = 34·sin 40° = 21.85 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 45 + 21.85·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (21.85 + √(477.6 + 882.9))/9.81 = 5.988 s

Horizontal distance

x = vx·t = 26.05·5.988 = 156 m

Answer

x = 156 m
7.Circular motion

Answer: ω = 3.132 rad/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces on a rider

N = m·ω²·r
μ·N = m·g → μ·ω²·r = g

Angular speed

ω = √(g/(μ·r)) = √(9.81/(0.4·2.5)) = 3.132 rad/s

Answer

ω = 3.132 rad/s
8.Circular motion

Answer: Nbottom = 363 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·1.6 = 31.39 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R + m·g = 5·31.39/0.5 + 49.05 = 363 N

Answer

Nbottom = 363 N
9.Work & energy

Answer: h = 5.097 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 10 cm = 0.1 m
½kx² = ½·500·0.1² = 2.5 J

Height

m·g = 0.05·9.81 = 0.4905 N
h = ½kx²/(mg) = 2.5/0.4905 = 5.097 m

Answer

h = 5.097 m
10.Work & energy

Answer: v = 7.924 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 98.1·(3.5 − 0.2·1.5) = 313.9 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·3.2) = 7.924 m/s

Answer

v = 7.924 m/s
11.Momentum & collisions

Answer: v′2 = 7.273 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (5 − 0.5)/(5 + 0.5)·4 = 3.273 m/s
v′2 = 2·5/(5 + 0.5)·4 = 7.273 m/s

Answer

v′2 = 7.273 m/s
12.Momentum & collisions

Answer: v = 393.7 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 0.6·(1 − cos 30°) = 0.08038 m

Speed after impact

V = √(2·9.81·0.08038) = 1.256 m/s

Collision

v = (m + M)·V/m = 2.508·1.256/0.008 = 393.7 m/s

Answer

v = 393.7 m/s
13.Rigid-body rotation

Answer: v = 4.474 m/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 + mball·g·L = 5.5·9.81·0.4 + 1.5·9.81·0.8 = 33.35 J

Moment of inertia about the pin

IO = m·L²/3 + mball·L² = 1.173 + 0.96 = 2.133 kg·m²

Energy balance

½·IO·ω² = 33.35 → ω = √(2·33.35/2.133) = 5.592 rad/s
v = ω·L = 5.592·0.8 = 4.474 m/s

Answer

v = 4.474 m/s
14.Rigid-body rotation

Answer: p = 40 %

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·18.5·5.5² = 279.8 J
Erot = ½·I·ω² = ½·0.6667·m·r²·(v/r)² = 0.6667·279.8 = 186.5 J

Rotational share

p = 186.5/466.4·100% = c/(1 + c)·100% = 40%

Answer

p = 40 %

The share depends only on the shape, not on the mass or the speed.

15.Gears & gear trains

Answer: P = 1.93 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 4.021 m/s

Power

P = (600 − 120)·4.021 = 1930 W = 1.93 kW

Answer

P = 1.93 kW
16.Gears & gear trains

Answer: nc = 378.9 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 20 + 2·18 = 56

Willis equation with the ring fixed

Set nr = 0 and solve for the carrier speed.

(1440 − nc)/(0 − nc) = −56/20
nc = ns·Ns/(Ns + Nr) = 1440·20/76 = 378.9 rpm

Answer

nc = 378.9 rpm

The carrier turns in the same direction as the sun.

17.Springs & pendulums

Answer: v = 0.7236 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(110/2.5) = 6.633 rad/s

Speed at x

v = ω·√(A² − x²) = 6.633·√(0.12² − 0.05²) = 0.7236 m/s

Answer

v = 0.7236 m/s
18.Springs & pendulums

Answer: xmax = 58.86 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 3·9.81/100 = 0.2943 m = A

Lowest point

xmax = 2A = 0.5886 m = 58.86 cm

Answer

xmax = 58.86 cm
19.Mechanical vibrations

Answer: fd = 2.306 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(5000/20) = 15.81 rad/s
fn = 15.81/(2π) = 2.516 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 2.516·√(1 − 0.4²) = 2.306 Hz

Answer

fd = 2.306 Hz
20.Mechanical vibrations

Answer: keq = 7.5 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/15 + 1/15 → keq = 15·15/(15 + 15) = 7.5 kN/m

Answer

keq = 7.5 kN/m

ExamProblems · examproblems.com/courses/dynamics