Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)0.6 s22.22

A driver moving at 80 km/h sees an obstacle. Her reaction time is 0.6 s, after which the car brakes with a constant deceleration of 4 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 80 km/htr = 0.6 sa = −4 m/s²
d = m
2.KinematicsHard
t (s)v (m/s)7 s

A tram starts from rest and accelerates at 1.5 m/s² for 7 s, then runs at constant speed for 27 s, and finally brakes at 4 m/s² until it stops. Find the total distance s between the two stops.

a1 = 1.5 m/s²t1 = 7 st2 = 27 sa3 = −4 m/s²
s = m
3.Newton’s lawsMedium
boxv₀ = 2 m/sμ = ?

A box slides across a level floor with an initial speed of 2 m/s and comes to rest after 4.1 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 2 m/sd = 4.1 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
m1​ = 8 kg2.5 kgno friction

An 8 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 2.5 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 8 kgm2 = 2.5 kgμ = 0g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 40 m/sθ = ?R = 60 m

A ball is launched from level ground at 40 m/s and must land 60 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 40 m/sR = 60 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 15 mv0​ = 33 m/s25°x = ?

A ball is launched at 25° above horizontal from the top of a 15 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 33 m/sθ = 25°h = 15 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 140 mvmax​ = ?

A car takes a flat curve of radius 140 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 140 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 1.5 mh = ?

A small cart is released from rest on a frictionless track and runs into a vertical loop of radius 1.5 m. From what minimum height hmin above the bottom of the loop must it start to stay on the track at the top of the loop?

R = 1.5 mv₀ = 0
hmin = m
9.Work & energyMedium
90 km/h5°1500 kg

A 1500 kg car drives up a 5° slope at a constant 90 km/h. Air resistance and rolling resistance together amount to 350 N. Find the power P the wheels must deliver, in kW.

m = 1500 kgθ = 5°Fr = 350 Nv = 90 km/hg = 9.81 m/s²
P = kW
10.Work & energyHard
h = 2 mL = 1.5 mμ = 0.15k = 5000 N/m

A 2 kg block is released from rest at height 2 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.15) and then runs onto a spring (k = 5000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 2 kgh = 2 mL = 1.5 mμ = 0.15k = 5000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
10 kg56 m/s8 kgv′2​ = ?

An 18 kg projectile moving horizontally at 5 m/s explodes into two fragments that move along the same line. The 10 kg fragment continues forwards at 56 m/s. Find the velocity v′2 of the 8 kg fragment (positive in the original direction).

M = 18 kgu = 5 m/sm1 = 10 kgv′1 = 56 m/sm2 = 8 kg
v′2 = m/s
12.Momentum & collisionsHard
23 m/s14 m/s

A 0.25 kg ball hits a wall at 23 m/s and bounces straight back at 14 m/s. The contact lasts 5 ms. Find the average force Favg of the wall on the ball.

m = 0.25 kgvin = 23 m/svout = 14 m/sΔt = 5 ms
Favg = N
13.Rigid-body rotationMedium
v = ?3 kgL = 0.7 mm = 9 kg

A uniform slender rod of mass 9 kg and length 0.7 m is pinned at one end and released from rest in a horizontal position. A small ball of mass 3 kg is fixed to its free end. Ignore friction and use g = 9.81 m/s². Find the speed v of the free end as the rod swings through the vertical position.

m = 9 kgL = 0.7 mmball = 3 kgg = 9.81 m/s²
v = m/s
14.Rigid-body rotationHard
4.5 m/sω

A solid sphere of mass 1 kg rolls without slipping at 4.5 m/s. What percentage p of its total kinetic energy is rotational?

m = 1 kgv = 4.5 m/sI = (2/5)·m·r²
p = %
15.Gears & gear trainsMedium
d1​ = 120 mmd2​ = 450 mm960 rpmn2​ = ?

A 120 mm pulley at 960 rpm drives a 450 mm pulley by a belt with 2 % slip. Find the speed n2 of the driven pulley.

n1 = 960 rpmd1 = 120 mmd2 = 450 mms = 2 %
n2 = rpm
16.Gears & gear trainsHard
A = 20B = 48C = 20D = 48

In a compound gear train, gear A (20 teeth) on the input shaft turning at 3000 rpm drives gear B (48 teeth). Gear C (20 teeth) is fixed to the same shaft as B and drives gear D (48 teeth) on the output shaft. Find the output speed nout.

nin = 3000 rpmA = 20B = 48C = 20D = 48
nout = rpm
17.Springs & pendulumsMedium
2.8 kgk = 500 N/mA = 16 cmx = 4 cm

A 2.8 kg mass on a spring with k = 500 N/m oscillates on a frictionless surface with an amplitude of 16 cm. Find its speed v when it is 4 cm from equilibrium.

m = 2.8 kgk = 500 N/mA = 16 cmx = 4 cm
v = m/s
18.Springs & pendulumsHard
3 kgk = 480 N/m

A 3 kg mass is attached to the lower end of an unstretched vertical spring with k = 480 N/m and released from rest. Use g = 9.81 m/s². Find the greatest speed vmax of the mass.

m = 3 kgk = 480 N/mg = 9.81 m/s²
vmax = m/s
19.Mechanical vibrationsMedium
k = 25 kN/mζ = 0.5m = 80 kg

An 80 kg mass on a spring with a stiffness of 25 kN/m has a viscous damper giving a damping ratio of 0.5. Find the damped natural frequency fd of its free vibration in Hz.

m = 80 kgk = 25 kN/mζ = 0.5
fd = Hz
20.Mechanical vibrationsHard
k1​ = 50k2​ = 30m = 25 kg

A 25 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 50 kN/m and k₂ = 30 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 50 kN/mk2 = 30 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 75.06 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 80/3.6 = 22.22 m/s

Reaction distance

d1 = v₀·tr = 22.22·0.6 = 13.33 m

Braking distance

d2 = v₀²/(2a) = 22.22²/(2·4) = 61.73 m

Total

d = 13.33 + 61.73 = 75.06 m

Answer

d = 75.06 m
2.Kinematics

Answer: s = 334 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Top speed

v = a1·t1 = 1.5·7 = 10.5 m/s

Distance of each phase

s1 = ½·1.5·7² = 36.75 m
s2 = 10.5·27 = 283.5 m
s3 = 10.5²/(2·4) = 13.78 m

Total distance

s = 36.75 + 283.5 + 13.78 = 334 m

Answer

s = 334 m
3.Newton’s laws

Answer: μ = 0.04973

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 2²/(2·4.1) = 0.4878 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 0.4878/9.81 = 0.04973

Answer

μ = 0.04973
4.Newton’s laws

Answer: a = 2.336 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (24.53 − 0)/10.5 = 2.336 m/s²

Answer

a = 2.336 m/s²
5.Projectile motion

Answer: θ = 10.79 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·60/40² = 0.3679

Angle

2θ = 21.58° → θ = 10.79°

Answer

θ = 10.79°

The other solution is 90° − θ = 79.21°.

6.Projectile motion

Answer: x = 109.9 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 33·cos 25° = 29.91 m/s
vy = v0·sin θ = 33·sin 25° = 13.95 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 15 + 13.95·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (13.95 + √(194.5 + 294.3))/9.81 = 3.675 s

Horizontal distance

x = vx·t = 29.91·3.675 = 109.9 m

Answer

x = 109.9 m
7.Circular motion

Answer: vmax = 28.71 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·140) = 28.71 m/s

Answer

vmax = 28.71 m/s (103.3 km/h)
8.Circular motion

Answer: hmin = 3.75 m

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Condition at the top

m·g = m·v²/R → v² = g·R

Energy conservation

g·h = g·2R + ½·g·R → h = 2.5·R = 2.5·1.5 = 3.75 m

Answer

hmin = 3.75 m
9.Work & energy

Answer: P = 40.81 kW

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.

Driving force

m·g = 1500·9.81 = 14715 N
mg·sin θ = 14715·sin 5° = 1282 N
F = 1282 + 350 = 1632 N

Power

v = 90/3.6 = 25 m/s
P = F·v = 1632·25 = 40812 W = 40.81 kW

Answer

P = 40.81 kW
10.Work & energy

Answer: x = 11.8 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 19.62·(2 − 0.15·1.5) = 34.83 J

Maximum compression

½kx² = 34.83 → x = √(2·34.83/5000) = 0.118 m = 11.8 cm

Answer

x = 11.8 cm
11.Momentum & collisions

Answer: v′2 = −58.75 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 18·5 = 90 kg·m/s

Momentum after

90 = 10·56 + 8·v′2
v′2 = (90 − 560)/8 = −58.75 m/s

Answer

v′2 = −58.75 m/s

The minus sign means the second fragment flies backwards.

12.Momentum & collisions

Answer: Favg = 1850 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.25·(14 + 23) = 9.25 N·s

Average force

Favg = J/Δt = 9.25/0.005 = 1850 N

Answer

Favg = 1850 N
13.Rigid-body rotation

Answer: v = 4.143 m/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 + mball·g·L = 9·9.81·0.35 + 3·9.81·0.7 = 51.5 J

Moment of inertia about the pin

IO = m·L²/3 + mball·L² = 1.47 + 1.47 = 2.94 kg·m²

Energy balance

½·IO·ω² = 51.5 → ω = √(2·51.5/2.94) = 5.919 rad/s
v = ω·L = 5.919·0.7 = 4.143 m/s

Answer

v = 4.143 m/s
14.Rigid-body rotation

Answer: p = 28.57 %

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·1·4.5² = 10.13 J
Erot = ½·I·ω² = ½·0.4·m·r²·(v/r)² = 0.4·10.13 = 4.05 J

Rotational share

p = 4.05/14.18·100% = c/(1 + c)·100% = 28.57%

Answer

p = 28.57 %

The share depends only on the shape, not on the mass or the speed.

15.Gears & gear trains

Answer: n2 = 250.9 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

960·120/450 = 256 rpm

With slip

n2 = 256·0.98 = 250.9 rpm

Answer

n2 = 250.9 rpm
16.Gears & gear trains

Answer: nout = 520.8 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 3000·20/48 = 1250 rpm = nC

Second stage

nout = 1250·20/48 = 520.8 rpm

Answer

nout = 520.8 rpm

total ratio = 5.76 : 1

17.Springs & pendulums

Answer: v = 2.07 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(500/2.8) = 13.36 rad/s

Speed at x

v = ω·√(A² − x²) = 13.36·√(0.16² − 0.04²) = 2.07 m/s

Answer

v = 2.07 m/s
18.Springs & pendulums

Answer: vmax = 0.7755 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 3·9.81/480 = 0.06131 m = A

Greatest speed

The speed is largest at equilibrium.

ω = √(480/3) = 12.65 rad/s
vmax = A·ω = 0.06131·12.65 = 0.7755 m/s

Answer

vmax = 0.7755 m/s
19.Mechanical vibrations

Answer: fd = 2.437 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(25000/80) = 17.68 rad/s
fn = 17.68/(2π) = 2.813 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 2.813·√(1 − 0.5²) = 2.437 Hz

Answer

fd = 2.437 Hz
20.Mechanical vibrations

Answer: fn = 9.003 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 50 + 30 = 80 kN/m

Natural frequency

ωn = √(80000/25) = 56.57 rad/s
fn = 56.57/(2π) = 9.003 Hz

Answer

fn = 9.003 Hz

ExamProblems · examproblems.com/courses/dynamics