Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)2.525 s13.89

A car driving at 50 km/h brakes with a constant deceleration of 5.5 m/s² until it stops. Find the braking distance s.

v₀ = 50 km/ha = −5.5 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 17 m/s25 m

A ball is thrown straight up at 17 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 17 m/sh₀ = 25 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 25°50 kgF = ?

A 50 kg box is pushed up a ramp at 25° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.4. Use g = 9.81 m/s². Find the pushing force F.

m = 50 kgθ = 25°μ = 0.4g = 9.81 m/s²
F = N
4.Newton’s lawsHard
m1​ = 1 kg0.5 kgμ = 0.1

A 1 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 0.5 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 1 kgm2 = 0.5 kgμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 24 m/s55°rangeH = ?

A ball is launched at 55° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 24 m/sθ = 55°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 55 mv0​ = 19 m/s15°range

A ball is launched at 15° above horizontal from the top of a 55 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 19 m/sθ = 15°h = 55 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 115 m22 m/s

A 1100 kg car drives over the top of a hump in the road at 22 m/s. The top of the hump is a circular arc of radius 115 m. Use g = 9.81 m/s². Find the normal force N of the road on the car at the top.

m = 1100 kgv = 22 m/sr = 115 mg = 9.81 m/s²
N = N
8.Circular motionHard
R = 3 mh = ?

A small cart is released from rest on a frictionless track and runs into a vertical loop of radius 3 m. From what minimum height hmin above the bottom of the loop must it start to stay on the track at the top of the loop?

R = 3 mv₀ = 0
hmin = m
9.Work & energyMedium
54 km/h6°1500 kg

A 1500 kg car drives up a 6° slope at a constant 54 km/h. Air resistance and rolling resistance together amount to 450 N. Find the power P the wheels must deliver, in kW.

m = 1500 kgθ = 6°Fr = 450 Nv = 54 km/hg = 9.81 m/s²
P = kW
10.Work & energyHard
h = 4 mL = 3 mμ = 0.3k = 2500 N/m

A 0.5 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3 m long (μ = 0.3) and then runs onto a spring (k = 2500 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 0.5 kgh = 4 mL = 3 mμ = 0.3k = 2500 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
4.5 kg3 m/s1.5 kg

A 4.5 kg glider moving at 3 m/s makes a perfectly elastic head-on collision with a 1.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 4.5 kgm2 = 1.5 kgv1 = 3 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
2 kgv = ?5 g35°L = 1.8 m

A 5 g bullet is fired horizontally into a 2 kg block hanging from light strings 1.8 m long, and stays in it. The strings swing out to a largest angle of 35° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 5 gM = 2 kgL = 1.8 mθ = 35°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
2.5 kgaαM = 18 kgR = 0.1 m

A 2.5 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 18 kg and radius 0.1 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the angular acceleration α of the pulley.

m = 2.5 kgM = 18 kgR = 0.1 mg = 9.81 m/s²
α = rad/s²
14.Rigid-body rotationHard
θ = 15°vs = 9 m

A thin hoop starts from rest and rolls without slipping down a slope inclined at 15° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 9 m along the slope.

θ = 15°s = 9 mI = m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
N1​ = 45N2​ = 80

A 1.5 kW motor running at 1500 rpm drives a pinion with 45 teeth, which meshes with a gear with 80 teeth. The gear pair has an efficiency of 97%. Find the output torque T2 on the gear shaft.

P = 1.5 kWn1 = 1500 rpmN1 = 45N2 = 80η = 97%
T2 = N·m
16.Gears & gear trainsHard
d1​ = 150 mmd2​ = 450 mm960 rpmC = 800 mmT1​ = 1000 NT2​P = ?

An open belt connects a 150 mm driving pulley at 960 rpm to a 450 mm pulley; the centres are 800 mm apart. The coefficient of friction is 0.35 and the tight-side tension may not exceed 1000 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 150 mmn1 = 960 rpmd2 = 450 mmC = 800 mmμ = 0.35T1 = 1000 N
P = kW
17.Springs & pendulumsMedium
L = 2.4 m

A simple pendulum has a length of 2.4 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 2.4 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
2.8 kgk = 310 N/mA = 12 cm

A 2.8 kg mass on a spring with k = 310 N/m is pulled 12 cm from equilibrium and released. Find its maximum acceleration amax.

m = 2.8 kgk = 310 N/mA = 12 cm
amax = m/s²
19.Mechanical vibrationsMedium
k = 10 kN/mc = 280 N·s/mm = 50 kg

A 50 kg mass is supported by a spring with a stiffness of 10 kN/m and a viscous damper with a damping coefficient of 280 N·s/m. Find the damping ratio ζ.

m = 50 kgk = 10 kN/mc = 280 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 40k2​ = 60m = 25 kg

A 25 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 40 kN/m and the lower one k₂ = 60 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 40 kN/mk2 = 60 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 17.54 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 50/3.6 = 13.89 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 13.89²/(2·5.5) = 17.54 m

Answer

s = 17.54 m
2.Kinematics

Answer: hmax = 39.73 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 17²/(2·9.81) = 14.73 m

Height above the ground

hmax = 25 + 14.73 = 39.73 m

Answer

hmax = 39.73 m
3.Newton’s laws

Answer: F = 385.1 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Constant speed: the forces balance.

F = m·g·sin θ + μ·m·g·cos θ

Pushing force

F = 207.3 + 177.8 = 385.1 N

Answer

F = 385.1 N
4.Newton’s laws

Answer: T = 3.597 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (4.905 − 0.981)/1.5 = 2.616 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 1·2.616 + 0.981 = 3.597 N

Answer

T = 3.597 N
5.Projectile motion

Answer: H = 19.7 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 24·cos 55° = 13.77 m/s
vy = v0·sin θ = 24·sin 55° = 19.66 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 19.66²/(2·9.81) = 19.7 m

Answer

H = 19.7 m
6.Projectile motion

Answer: t = 3.887 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 19·cos 15° = 18.35 m/s
vy = v0·sin θ = 19·sin 15° = 4.918 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 55 + 4.918·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (4.918 + √(24.18 + 1079))/9.81 = 3.887 s

Answer

t = 3.887 s
7.Circular motion

Answer: N = 6161 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the top

Towards the centre (down) is positive.

m·g − N = m·v²/r
N = 1100·9.81 − 1100·22²/115 = 10791 − 4630 = 6161 N

Answer

N = 6161 N

The car feels lighter: the road pushes up less than its weight.

8.Circular motion

Answer: hmin = 7.5 m

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Condition at the top

m·g = m·v²/R → v² = g·R

Energy conservation

g·h = g·2R + ½·g·R → h = 2.5·R = 2.5·3 = 7.5 m

Answer

hmin = 7.5 m
9.Work & energy

Answer: P = 29.82 kW

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.

Driving force

m·g = 1500·9.81 = 14715 N
mg·sin θ = 14715·sin 6° = 1538 N
F = 1538 + 450 = 1988 N

Power

v = 54/3.6 = 15 m/s
P = F·v = 1988·15 = 29822 W = 29.82 kW

Answer

P = 29.82 kW
10.Work & energy

Answer: x = 11.03 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 4.905·(4 − 0.3·3) = 15.21 J

Maximum compression

½kx² = 15.21 → x = √(2·15.21/2500) = 0.1103 m = 11.03 cm

Answer

x = 11.03 cm
11.Momentum & collisions

Answer: v′1 = 1.5 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (4.5 − 1.5)/(4.5 + 1.5)·3 = 1.5 m/s
v′2 = 2·4.5/(4.5 + 1.5)·3 = 4.5 m/s

Answer

v′1 = 1.5 m/s
12.Momentum & collisions

Answer: v = 1013 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.8·(1 − cos 35°) = 0.3255 m

Speed after impact

V = √(2·9.81·0.3255) = 2.527 m/s

Collision

v = (m + M)·V/m = 2.005·2.527/0.005 = 1013 m/s

Answer

v = 1013 m/s
13.Rigid-body rotation

Answer: α = 21.33 rad/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Block and pulley

block: m·g − T = m·a
pulley: T·R = I·α = ½·M·R²·(a/R) → T = ½·M·a

Acceleration

a = m·g/(m + M/2) = 2.5·9.81/(2.5 + 9) = 2.133 m/s²

Angular acceleration

α = a/R = 2.133/0.1 = 21.33 rad/s²

Answer

α = 21.33 rad/s²
14.Rigid-body rotation

Answer: v = 4.78 m/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 9·sin 15° = 2.329 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 1)
v = √(2·9.81·2.329/2) = 4.78 m/s

Answer

v = 4.78 m/s
15.Gears & gear trains

Answer: T2 = 16.47 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 1500/157.1 = 9.549 N·m

Output torque

T2 = 9.549·80/45·0.97 = 16.47 N·m

Answer

T2 = 16.47 N·m
16.Gears & gear trains

Answer: P = 4.675 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.764 rad

Slack-side tension

eμθ = e0.9675 = 2.631, T₂ = 1000/2.631 = 380 N

Power

P = (1000 − 380)·7.54 = 4.675 kW

Answer

P = 4.675 kW
17.Springs & pendulums

Answer: T = 3.108 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(2.4/9.81) = 3.108 s

Answer

T = 3.108 s
18.Springs & pendulums

Answer: amax = 13.29 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(310/2.8) = 10.52 rad/s

Maximum acceleration

amax = A·ω² = 0.12·10.52² = 13.29 m/s²

Answer

amax = 13.29 m/s²
19.Mechanical vibrations

Answer: ζ = 0.198

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(10000·50) = 1414 N·s/m

Damping ratio

ζ = c/cc = 280/1414 = 0.198

Answer

ζ = 0.198

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 4.931 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/40 + 1/60 → keq = 40·60/(40 + 60) = 24 kN/m

Natural frequency

ωn = √(24000/25) = 30.98 rad/s
fn = 30.98/(2π) = 4.931 Hz

Answer

fn = 4.931 Hz

ExamProblems · examproblems.com/courses/dynamics