Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)1 s16.67

A driver moving at 60 km/h sees an obstacle. Her reaction time is 1 s, after which the car brakes with a constant deceleration of 5 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 60 km/htr = 1 sa = −5 m/s²
d = m
2.KinematicsHard
v₀ = 16 m/s5 m

A ball is thrown straight up at 16 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 16 m/sh₀ = 5 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 20°5 kgF = ?

A 5 kg box is pushed up a ramp at 20° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the pushing force F.

m = 5 kgθ = 20°μ = 0.2g = 9.81 m/s²
F = N
4.Newton’s lawsHard
m1​ = 9 kg9.5 kgθ = 30°

A 9 kg block on a ramp at 30° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 9.5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.2. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 9 kgm2 = 9.5 kgθ = 30°μ = 0.2g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = ?50°R = 60 m

A ball is launched from level ground at 50° above the horizontal and lands 60 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 50°R = 60 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 60 mv0​ = 12 m/s15°x = ?

A ball is launched at 15° above horizontal from the top of a 60 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 12 m/sθ = 15°h = 60 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 100 mvmax​ = ?

A car takes a flat curve of radius 100 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 100 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 8 mh = ?

A small cart is released from rest on a frictionless track and runs into a vertical loop of radius 8 m. From what minimum height hmin above the bottom of the loop must it start to stay on the track at the top of the loop?

R = 8 mv₀ = 0
hmin = m
9.Work & energyMedium
35°d = 7 mμ = 0.25

A block slides from rest down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.25. Find its speed v after it has slid 7 m along the slope.

θ = 35°μ = 0.25d = 7 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 5.3 mR = 1.5 mN = ?

A 0.5 kg cart is released from rest at a height of 5.3 m on a smooth track that leads into a vertical circular loop of radius 1.5 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 0.5 kgh = 5.3 mR = 1.5 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
1600 kg13 m/s1000 kg

A 1600 kg car moving at 13 m/s runs into a stationary 1000 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 1600 kgv1 = 13 m/sm2 = 1000 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
20 m/s9 m/s

A 0.55 kg ball hits a wall at 20 m/s and bounces straight back at 9 m/s. The contact lasts 50 ms. Find the average force Favg of the wall on the ball.

m = 0.55 kgvin = 20 m/svout = 9 m/sΔt = 50 ms
Favg = N
13.Rigid-body rotationMedium
L = 2.2 mm = 11 kgα

A uniform slender rod of mass 11 kg and length 2.2 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 11 kgL = 2.2 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
θ = 30°a

A solid sphere rolls without slipping down a slope inclined at 30° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of its centre.

θ = 30°I = (2/5)·m·r²g = 9.81 m/s²
a = m/s²
15.Gears & gear trainsMedium
d1​ = 150 mmd2​ = 250 mm1440 rpmn2​ = ?

A 150 mm pulley at 1440 rpm drives a 250 mm pulley by a belt with 4 % slip. Find the speed n2 of the driven pulley.

n1 = 1440 rpmd1 = 150 mmd2 = 250 mms = 4 %
n2 = rpm
16.Gears & gear trainsHard
Ns​ = 30ring fixedNp​ = 24nc​ = ?

In a planetary gear set the sun gear has 30 teeth and each planet gear has 24 teeth. The ring gear is held fixed and the sun is driven at 900 rpm. Find the speed nc of the planet carrier.

Ns = 30Np = 24ns = 900 rpm
nc = rpm
17.Springs & pendulumsMedium
t (s)x (cm)0.4 s

A 2.7 kg mass on a spring with k = 140 N/m is pulled 9 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 0.4 s (with sign).

m = 2.7 kgk = 140 N/mA = 9 cmt = 0.4 s
x = cm
18.Springs & pendulumsHard
t (s)x (cm)t = ?16.2

A body oscillates in simple harmonic motion with period 1.2 s and amplitude 18 cm. What is the shortest time t it needs to move from its maximum displacement of 18 cm to a displacement of 16.2 cm?

T = 1.2 sA = 18 cmx = 16.2 cm
t = s
19.Mechanical vibrationsMedium
k = 40 kN/mc = 770 N·s/mm = 15 kg

A 15 kg mass is supported by a spring with a stiffness of 40 kN/m and a viscous damper with a damping coefficient of 770 N·s/m. Find the damping ratio ζ.

m = 15 kgk = 40 kN/mc = 770 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 30k2​ = 25k3​ = 100m = 50 kg

A 50 kg mass hangs from spring k₃ = 100 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 30 kN/m and k₂ = 25 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 30 kN/mk2 = 25 kN/mk3 = 100 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 44.44 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 60/3.6 = 16.67 m/s

Reaction distance

d1 = v₀·tr = 16.67·1 = 16.67 m

Braking distance

d2 = v₀²/(2a) = 16.67²/(2·5) = 27.78 m

Total

d = 16.67 + 27.78 = 44.44 m

Answer

d = 44.44 m
2.Kinematics

Answer: hmax = 18.05 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 16²/(2·9.81) = 13.05 m

Height above the ground

hmax = 5 + 13.05 = 18.05 m

Answer

hmax = 18.05 m
3.Newton’s laws

Answer: F = 25.99 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Constant speed: the forces balance.

F = m·g·sin θ + μ·m·g·cos θ

Pushing force

F = 16.78 + 9.218 = 25.99 N

Answer

F = 25.99 N
4.Newton’s laws

Answer: a = 1.825 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 93.2 N
m₁·g·sin θ = 44.14 N
μ·m₁·g·cos θ = 15.29 N

Acceleration of the system

a = (93.2 − 44.14 − 15.29)/18.5 = 1.825 m/s²

Answer

a = 1.825 m/s²
5.Projectile motion

Answer: v0 = 24.45 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·60/sin 100°) = 24.45 m/s

Answer

v0 = 24.45 m/s
6.Projectile motion

Answer: x = 44.38 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 12·cos 15° = 11.59 m/s
vy = v0·sin θ = 12·sin 15° = 3.106 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 60 + 3.106·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (3.106 + √(9.646 + 1177))/9.81 = 3.828 s

Horizontal distance

x = vx·t = 11.59·3.828 = 44.38 m

Answer

x = 44.38 m
7.Circular motion

Answer: vmax = 26.2 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·100) = 26.2 m/s

Answer

vmax = 26.2 m/s (94.34 km/h)
8.Circular motion

Answer: hmin = 20 m

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Condition at the top

m·g = m·v²/R → v² = g·R

Energy conservation

g·h = g·2R + ½·g·R → h = 2.5·R = 2.5·8 = 20 m

Answer

hmin = 20 m
9.Work & energy

Answer: v = 7.117 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·7·(0.5736 − 0.25·0.8192)) = 7.117 m/s

Answer

v = 7.117 m/s
10.Work & energy

Answer: N = 10.14 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(5.3 − 3) = 45.13 m²/s²

Forces at the top

m·g = 0.5·9.81 = 4.905 N
N = mv²/R − mg = 0.5·45.13/1.5 − 4.905 = 10.14 N

Answer

N = 10.14 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: ΔK = 52000 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1600·13/2600 = 8 m/s

Kinetic energy before and after

Kbefore = ½·1600·13² = 135200 J
Kafter = ½·2600·8² = 83200 J

Energy lost

ΔK = 135200 − 83200 = 52000 J

Answer

ΔK = 52000 J

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: Favg = 319 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.55·(9 + 20) = 15.95 N·s

Average force

Favg = J/Δt = 15.95/0.05 = 319 N

Answer

Favg = 319 N
13.Rigid-body rotation

Answer: R = 26.98 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.2) = 6.689 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 11·(9.81 − 7.357) = 26.98 N

Answer

R = 26.98 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: a = 3.504 m/s²

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.4·m·r²·(a/r) → f = 0.4·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 30°/1.4 = 3.504 m/s²

Answer

a = 3.504 m/s²
15.Gears & gear trains

Answer: n2 = 829.4 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1440·150/250 = 864 rpm

With slip

n2 = 864·0.96 = 829.4 rpm

Answer

n2 = 829.4 rpm
16.Gears & gear trains

Answer: nc = 250 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 30 + 2·24 = 78

Willis equation with the ring fixed

Set nr = 0 and solve for the carrier speed.

(900 − nc)/(0 − nc) = −78/30
nc = ns·Ns/(Ns + Nr) = 900·30/108 = 250 rpm

Answer

nc = 250 rpm

The carrier turns in the same direction as the sun.

17.Springs & pendulums

Answer: x = −8.695 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(140/2.7) = 7.201 rad/s
ω·t = 7.201·0.4 = 2.88 rad

Displacement

x = A·cos(ω·t) = 9·cos(2.88) = −8.695 cm

Answer

x = −8.695 cm
18.Springs & pendulums

Answer: t = 0.08614 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = 2π/T = 2π/1.2 = 5.236 rad/s

Solve for the time

0.9 = cos(ω·t) → ω·t = arccos(0.9) = 0.451 rad
t = 0.451/5.236 = 0.08614 s

Answer

t = 0.08614 s
19.Mechanical vibrations

Answer: ζ = 0.497

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(40000·15) = 1549 N·s/m

Damping ratio

ζ = c/cc = 770/1549 = 0.497

Answer

ζ = 0.497

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 4.24 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 30 + 25 = 55 kN/m
keq = 55·100/(55 + 100) = 35.48 kN/m

Natural frequency

ωn = √(35484/50) = 26.64 rad/s
fn = 26.64/(2π) = 4.24 Hz

Answer

fn = 4.24 Hz

ExamProblems · examproblems.com/courses/dynamics