Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)0.7 s10

A driver moving at 36 km/h sees an obstacle. Her reaction time is 0.7 s, after which the car brakes with a constant deceleration of 7.5 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 36 km/htr = 0.7 sa = −7.5 m/s²
d = m
2.KinematicsHard
v₀ = 8 m/s20 m

A ball is thrown straight up at 8 m/s from the edge of a roof 20 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 8 m/sh₀ = 20 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 45°a = ?m = 20 kg

A 20 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 20 kgθ = 45°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 4 kg5 kgμ = 0.1

A 4 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 4 kgm2 = 5 kgμ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 26 m/s70°x = ?

A ball is launched at 70° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 26 m/sθ = 70°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 30 mv0​ = 26 m/s55°range

A ball is launched at 55° above horizontal from the top of a 30 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 26 m/sθ = 55°h = 30 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 115 m9 m/s

A 1300 kg car drives over the top of a hump in the road at 9 m/s. The top of the hump is a circular arc of radius 115 m. Use g = 9.81 m/s². Find the normal force N of the road on the car at the top.

m = 1300 kgv = 9 m/sr = 115 mg = 9.81 m/s²
N = N
8.Circular motionHard
r = 0.5 m7 m/svtop​ = ?

A 0.5 kg ball on a light string 0.5 m long is swung in a vertical circle. At the lowest point its speed is 7 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 0.5 kgr = 0.5 mvbottom = 7 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
0.25 kgk = 200 N/mh = ?

A toy launcher has a vertical spring of stiffness 200 N/m. A 0.25 kg ball is placed on it and the spring is compressed by 8 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.

m = 0.25 kgk = 200 N/mx = 8 cmg = 9.81 m/s²
h = m
10.Work & energyHard
4 kg2 kgμ = 0.15d = 1 m

A 4 kg block rests on a rough horizontal table (μ = 0.15). A light string runs from it over a smooth pulley at the edge of the table to a hanging 2 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 1 m.

m1 = 4 kgm2 = 2 kgμ = 0.15d = 1 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
3 kgv = ?15 gh = 7 cm

A 15 g bullet is fired horizontally into a 3 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 7 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 15 gM = 3 kgh = 7 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
14 m/s17 m/s

A 0.6 kg ball hits a wall at 14 m/s and bounces straight back at 17 m/s. The contact lasts 40 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.6 kgvin = 14 m/svout = 17 m/sΔt = 40 ms
J = N·s
13.Rigid-body rotationMedium
n = 3000 rpmTb​ = 55 N·mI = 5 kg·m²

A flywheel with a moment of inertia of 5 kg·m² spins at 3000 rpm. A brake applies a constant friction torque of 55 N·m. How long t does it take to stop?

I = 5 kg·m²n = 3000 rpmTb = 55 N·m
t = s
14.Rigid-body rotationHard
260 m/s25 g1.27 mL = 1.8 m4 kgφ

A uniform slender rod of mass 4 kg and length 1.8 m hangs at rest from a frictionless pivot at its top end. A 25 g bullet moving horizontally at 260 m/s hits the rod 1.27 m below the pivot and stays embedded. Use g = 9.81 m/s². Find the largest angle φ from the vertical through which the rod swings.

M = 4 kgL = 1.8 mm = 25 gv = 260 m/sd = 1.27 mg = 9.81 m/s²
φ = °
15.Gears & gear trainsMedium
N1​ = 12N2​ = 25

A 7.5 kW motor running at 960 rpm drives a pinion with 12 teeth, which meshes with a gear with 25 teeth. The gear pair has an efficiency of 95%. Find the torque T1 on the motor shaft.

P = 7.5 kWn1 = 960 rpmN1 = 12N2 = 25η = 95%
T1 = N·m
16.Gears & gear trainsHard
d1​ = 120 mmd2​ = 315 mm1440 rpmC = 800 mmθ = ?

An open belt connects a 120 mm pulley and a 315 mm pulley whose centres are 800 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 120 mmd2 = 315 mmC = 800 mm
θ = °
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 2.3 s? Use g = 9.81 m/s². Find L.

T = 2.3 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
t (s)x (cm)t = ?2.4

A body oscillates in simple harmonic motion with period 2 s and amplitude 8 cm. What is the shortest time t it needs to move from its maximum displacement of 8 cm to a displacement of 2.4 cm?

T = 2 sA = 8 cmx = 2.4 cm
t = s
19.Mechanical vibrationsMedium
k = 20 kN/mc = 70 N·s/mm = 10 kg

A 10 kg mass is supported by a spring with a stiffness of 20 kN/m and a viscous damper with a damping coefficient of 70 N·s/m. Find the damping ratio ζ.

m = 10 kgk = 20 kN/mc = 70 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 25k2​ = 30m = 100 kg

A 100 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 25 kN/m and k₂ = 30 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 25 kN/mk2 = 30 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 13.67 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 36/3.6 = 10 m/s

Reaction distance

d1 = v₀·tr = 10·0.7 = 7 m

Braking distance

d2 = v₀²/(2a) = 10²/(2·7.5) = 6.667 m

Total

d = 7 + 6.667 = 13.67 m

Answer

d = 13.67 m
2.Kinematics

Answer: hmax = 23.26 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 8²/(2·9.81) = 3.262 m

Height above the ground

hmax = 20 + 3.262 = 23.26 m

Answer

hmax = 23.26 m
3.Newton’s laws

Answer: a = 4.856 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 45° − 0.3·cos 45°) = 9.81·(0.7071 − 0.2121) = 4.856 m/s²

Answer

a = 4.856 m/s²
4.Newton’s laws

Answer: a = 5.014 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (49.05 − 3.924)/9 = 5.014 m/s²

Answer

a = 5.014 m/s²
5.Projectile motion

Answer: x = 44.29 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 26·cos 70° = 8.893 m/s
vy = v0·sin θ = 26·sin 70° = 24.43 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·24.43/9.81 = 4.981 s

Horizontal distance

x = vx·t = 8.893·4.981 = 44.29 m

Answer

x = 44.29 m
6.Projectile motion

Answer: t = 5.462 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 26·cos 55° = 14.91 m/s
vy = v0·sin θ = 26·sin 55° = 21.3 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 30 + 21.3·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (21.3 + √(453.6 + 588.6))/9.81 = 5.462 s

Answer

t = 5.462 s
7.Circular motion

Answer: N = 11837 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the top

Towards the centre (down) is positive.

m·g − N = m·v²/r
N = 1300·9.81 − 1300·9²/115 = 12753 − 915.7 = 11837 N

Answer

N = 11837 N

The car feels lighter: the road pushes up less than its weight.

8.Circular motion

Answer: Ttop = 24.47 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 7² − 4·9.81·0.5 = 29.38 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 0.5·29.38/0.5 − 0.5·9.81 = 24.47 N

Answer

Ttop = 24.47 N
9.Work & energy

Answer: h = 0.261 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 8 cm = 0.08 m
½kx² = ½·200·0.08² = 0.64 J

Height

m·g = 0.25·9.81 = 2.453 N
h = ½kx²/(mg) = 0.64/2.453 = 0.261 m

Answer

h = 0.261 m
10.Work & energy

Answer: v = 2.14 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 19.62·1 = 19.62 J
μ·m₁g·d = 0.15·39.24·1 = 5.886 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 13.73 → v = √(2·13.73/6) = 2.14 m/s

Answer

v = 2.14 m/s
11.Momentum & collisions

Answer: v = 235.6 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.07) = 1.172 m/s

Collision

m·v = (m + M)·V → v = (0.015 + 3)·1.172/0.015 = 235.6 m/s

Answer

v = 235.6 m/s
12.Momentum & collisions

Answer: J = 18.6 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.6·(17 + 14) = 18.6 N·s

Answer

J = 18.6 N·s
13.Rigid-body rotation

Answer: t = 28.56 s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·3000/60 = 314.2 rad/s

Deceleration and time

α = Tb/I = 55/5 = 11 rad/s²
t = ω/α = 314.2/11 = 28.56 s

Answer

t = 28.56 s
14.Rigid-body rotation

Answer: φ = 38.68 °

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 4·1.8²/3 + 0.025·1.27² = 4.36 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.025·260·1.27/4.36 = 1.893 rad/s

Energy during the swing

½·I·ω² = ½·4.36·1.893² = 7.814 J
(M·g·L/2 + m·g·d)·(1 − cos φ) = 35.63·(1 − cos φ)
cos φ = 1 − 7.814/35.63 = 0.7807 → φ = 38.68°

Answer

φ = 38.68°
15.Gears & gear trains

Answer: T1 = 74.6 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·960/60 = 100.5 rad/s
T1 = P/ω₁ = 7500/100.5 = 74.6 N·m

Answer

T1 = 74.6 N·m
16.Gears & gear trains

Answer: θ = 166 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.1219) = 7°

Angle of wrap

θ = 180 − 2·7 = 166°

Answer

θ = 166°
17.Springs & pendulums

Answer: L = 1.315 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(2.3/2π)² = 1.315 m

Answer

L = 1.315 m
18.Springs & pendulums

Answer: t = 0.403 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = 2π/T = 2π/2 = 3.142 rad/s

Solve for the time

0.3 = cos(ω·t) → ω·t = arccos(0.3) = 1.266 rad
t = 1.266/3.142 = 0.403 s

Answer

t = 0.403 s
19.Mechanical vibrations

Answer: ζ = 0.07826

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(20000·10) = 894.4 N·s/m

Damping ratio

ζ = c/cc = 70/894.4 = 0.07826

Answer

ζ = 0.07826

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 3.733 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 25 + 30 = 55 kN/m

Natural frequency

ωn = √(55000/100) = 23.45 rad/s
fn = 23.45/(2π) = 3.733 Hz

Answer

fn = 3.733 Hz

ExamProblems · examproblems.com/courses/dynamics