Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)5 s20

A car driving at 72 km/h brakes with a constant deceleration of 4 m/s² until it stops. Find the braking distance s.

v₀ = 72 km/ha = −4 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 10 m/s30 m

A ball is thrown straight up at 10 m/s from the edge of a roof 30 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 10 m/sh₀ = 30 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 20°a = ?m = 13 kg

A 13 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 13 kgθ = 20°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 25°blockv₀ = 10 m/s

A block is given a push so that it starts sliding up a ramp at 25° with a speed of 10 m/s. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 10 m/sθ = 25°μ = 0.25g = 9.81 m/s²
d = m
5.Projectile motionMedium
56 my = ?v0​ = 40 m/s30°

A ball is kicked from level ground at 40 m/s and 30° above the horizontal towards a wall 56 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 40 m/sθ = 30°x = 56 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 50 mv0​ = 14 m/s25°range

A ball is launched at 25° above horizontal from the top of a 50 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 14 m/sθ = 25°h = 50 mg = 9.81 m/s²
t = s
7.Circular motionMedium
θ = 15°to centrev = ?

A curve of radius 110 m is banked at 15°. At what speed v can a car take it with no friction needed at all? Use g = 9.81 m/s².

r = 110 mθ = 15°g = 9.81 m/s²
v = m/s
8.Circular motionHard
R = 1.5 mh = 7.2 m

A 0.5 kg cart is released from rest at a height of 7.2 m on a frictionless track and runs through a vertical loop of radius 1.5 m. Use g = 9.81 m/s². Find the normal force Ntop of the track on the cart at the top of the loop.

m = 0.5 kgh = 7.2 mR = 1.5 mg = 9.81 m/s²
Ntop = N
9.Work & energyMedium
30 km/h

A car travelling at 30 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.5. Find the stopping distance d.

v = 30 km/hμ = 0.5g = 9.81 m/s²
d = m
10.Work & energyHard
h = 16 mR = 5 mN = ?

A 2 kg cart is released from rest at a height of 16 m on a smooth track that leads into a vertical circular loop of radius 5 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 2 kgh = 16 mR = 5 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
2 kg59 m/s7 kgv′2​ = ?

A 9 kg projectile moving horizontally at 19 m/s explodes into two fragments that move along the same line. The 2 kg fragment continues forwards at 59 m/s. Find the velocity v′2 of the 7 kg fragment (positive in the original direction).

M = 9 kgu = 19 m/sm1 = 2 kgv′1 = 59 m/sm2 = 7 kg
v′2 = m/s
12.Momentum & collisionsHard
17 m/s12 m/s

A 0.4 kg ball hits a wall at 17 m/s and bounces straight back at 12 m/s. The contact lasts 40 ms. Find the average force Favg of the wall on the ball.

m = 0.4 kgvin = 17 m/svout = 12 m/sΔt = 40 ms
Favg = N
13.Rigid-body rotationMedium
n = 1200 rpmTb​ = 70 N·mI = 8 kg·m²

A flywheel with a moment of inertia of 8 kg·m² spins at 1200 rpm. A brake applies a constant friction torque of 70 N·m. How long t does it take to stop?

I = 8 kg·m²n = 1200 rpmTb = 70 N·m
t = s
14.Rigid-body rotationHard
300 m/s30 g0.39 mL = 0.6 m1 kg

A uniform slender rod of mass 1 kg and length 0.6 m hangs at rest from a frictionless pivot at its top end. A 30 g bullet moving horizontally at 300 m/s hits the rod 0.39 m below the pivot and stays embedded. Find the angular velocity ω of the rod just after the impact.

M = 1 kgL = 0.6 mm = 30 gv = 300 m/sd = 0.39 m
ω = rad/s
15.Gears & gear trainsMedium
N1​N2​ = ?

Two parallel shafts are 78.75 mm apart. They must be connected by a pair of spur gears with a module of 2.5 mm and a speed reduction of 2.5 : 1. How many teeth N2 must the gear have?

a = 78.75 mmm = 2.5 mmi = 2.5
N2 =
16.Gears & gear trainsHard
A = 24B = 32C = 12D = ?

In a compound gear train, gear A (24 teeth) on the input shaft turns at 1440 rpm and drives gear B (32 teeth). Gear C (12 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 288 rpm. How many teeth ND must gear D have?

nin = 1440 rpmA = 24B = 32C = 12nout = 288 rpm
ND =
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 2.7 s? Use g = 9.81 m/s². Find L.

T = 2.7 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
3.5 kgk = 90 N/mA = 4 cm

A 3.5 kg mass on a spring with k = 90 N/m is pulled 4 cm from equilibrium and released. Find its maximum acceleration amax.

m = 3.5 kgk = 90 N/mA = 4 cm
amax = m/s²
19.Mechanical vibrationsMedium
k = 200 kN/mc = 1410 N·s/mm = 40 kg

A 40 kg mass is supported by a spring with a stiffness of 200 kN/m and a viscous damper with a damping coefficient of 1410 N·s/m. Find the damping ratio ζ.

m = 40 kgk = 200 kN/mc = 1410 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 60k2​ = 40k3​ = 40m = 20 kg

A 20 kg mass hangs from spring k₃ = 40 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 60 kN/m and k₂ = 40 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 20 kgk1 = 60 kN/mk2 = 40 kN/mk3 = 40 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 50 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 72/3.6 = 20 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 20²/(2·4) = 50 m

Answer

s = 50 m
2.Kinematics

Answer: hmax = 35.1 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 10²/(2·9.81) = 5.097 m

Height above the ground

hmax = 30 + 5.097 = 35.1 m

Answer

hmax = 35.1 m
3.Newton’s laws

Answer: a = 2.433 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 20° − 0.1·cos 20°) = 9.81·(0.342 − 0.09397) = 2.433 m/s²

Answer

a = 2.433 m/s²
4.Newton’s laws

Answer: d = 7.851 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 25° + 0.25·cos 25°) = 6.369 m/s²

Distance

d = v₀²/(2a) = 10²/(2·6.369) = 7.851 m

Answer

d = 7.851 m
5.Projectile motion

Answer: y = 19.51 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 40·cos 30° = 34.64 m/s
t = x/vx = 56/34.64 = 1.617 s

Height at that time

y = 20·1.617 − ½·9.81·1.617² = 19.51 m

Answer

y = 19.51 m

The ball is still rising at the wall.

6.Projectile motion

Answer: t = 3.852 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 14·cos 25° = 12.69 m/s
vy = v0·sin θ = 14·sin 25° = 5.917 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 50 + 5.917·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (5.917 + √(35.01 + 981))/9.81 = 3.852 s

Answer

t = 3.852 s
7.Circular motion

Answer: v = 17 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balance

N·cos θ = m·g, N·sin θ = m·v²/r → tan θ = v²/(r·g)

Speed

v = √(r·g·tan θ) = √(110·9.81·tan 15°) = 17 m/s

Answer

v = 17 m/s
(61.22 km/h)
8.Circular motion

Answer: Ntop = 22.56 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·(7.2 − 2·1.5) = 82.4 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R − m·g = 0.5·82.4/1.5 − 4.905 = 22.56 N

Answer

Ntop = 22.56 N
9.Work & energy

Answer: d = 7.079 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Speed in base units

v = 30/3.6 = 8.333 m/s

Energy balance

½mv² = μmg·d → d = v²/(2μg) = 8.333²/(2·0.5·9.81) = 7.079 m

Answer

d = 7.079 m

Doubling the speed makes the stopping distance four times longer.

10.Work & energy

Answer: N = 27.47 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(16 − 10) = 117.7 m²/s²

Forces at the top

m·g = 2·9.81 = 19.62 N
N = mv²/R − mg = 2·117.7/5 − 19.62 = 27.47 N

Answer

N = 27.47 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′2 = 7.571 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 9·19 = 171 kg·m/s

Momentum after

171 = 2·59 + 7·v′2
v′2 = (171 − 118)/7 = 7.571 m/s

Answer

v′2 = 7.571 m/s
12.Momentum & collisions

Answer: Favg = 290 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.4·(12 + 17) = 11.6 N·s

Average force

Favg = J/Δt = 11.6/0.04 = 290 N

Answer

Favg = 290 N
13.Rigid-body rotation

Answer: t = 14.36 s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1200/60 = 125.7 rad/s

Deceleration and time

α = Tb/I = 70/8 = 8.75 rad/s²
t = ω/α = 125.7/8.75 = 14.36 s

Answer

t = 14.36 s
14.Rigid-body rotation

Answer: ω = 28.18 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 1·0.6²/3 + 0.03·0.39² = 0.1246 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.03·300·0.39/0.1246 = 28.18 rad/s

Answer

ω = 28.18 rad/s
15.Gears & gear trains

Answer: N2 = 45

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·78.75/2.5 = 63

Split by the ratio

N1 = 63/(1 + 2.5) = 18
N2 = 2.5·18 = 45

Answer

N2 = 45
16.Gears & gear trains

Answer: ND = 45

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 1440·24/32 = 1080 rpm

Teeth on gear D

ND = C·nC/nout = 12·1080/288 = 45

Answer

ND = 45
17.Springs & pendulums

Answer: L = 1.811 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(2.7/2π)² = 1.811 m

Answer

L = 1.811 m
18.Springs & pendulums

Answer: amax = 1.029 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(90/3.5) = 5.071 rad/s

Maximum acceleration

amax = A·ω² = 0.04·5.071² = 1.029 m/s²

Answer

amax = 1.029 m/s²
19.Mechanical vibrations

Answer: ζ = 0.2493

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(200000·40) = 5657 N·s/m

Damping ratio

ζ = c/cc = 1410/5657 = 0.2493

Answer

ζ = 0.2493

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 6.015 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 60 + 40 = 100 kN/m
keq = 100·40/(100 + 40) = 28.57 kN/m

Natural frequency

ωn = √(28571/20) = 37.8 rad/s
fn = 37.8/(2π) = 6.015 Hz

Answer

fn = 6.015 Hz

ExamProblems · examproblems.com/courses/dynamics