In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 100 km/h brakes with a constant deceleration of 8 m/s² until it stops. Find the braking distance s.
v₀ = 100 km/ha = −8 m/s²v = 0
s = m
2.KinematicsHard
A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 36 m/s² for 1.5 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². How long after launch does it hit the ground? Find t.
a = 36 m/s²t1 = 1.5 sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 7 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 7 kgθ = 25°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A block is given a push so that it starts sliding up a ramp at 15° with a speed of 8.5 m/s. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?
v₀ = 8.5 m/sθ = 15°μ = 0.1g = 9.81 m/s²
d = m
5.Projectile motionMedium
A ball is launched at 25° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.
v0 = 22 m/sθ = 25°g = 9.81 m/s²
H = m
6.Projectile motionHard
A ball is launched at 55° above horizontal from the top of a 60 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 27 m/sθ = 55°h = 60 mg = 9.81 m/s²
x = m
7.Circular motionMedium
A car takes a flat curve of radius 40 m. The coefficient of static friction between tyres and road is 0.4. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 40 mμs = 0.4g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A 1.7 kg ball on a light string 0.5 m long is swung in a vertical circle. At the lowest point its speed is 6.5 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.
m = 1.7 kgr = 0.5 mvbottom = 6.5 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
A block slides from rest down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.1. Find its speed v after it has slid 3 m along the slope.
θ = 45°μ = 0.1d = 3 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
A 2 kg block is released from rest at height 3 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2 m long (μ = 0.15) and then runs onto a spring (k = 800 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 2 kgh = 3 mL = 2 mμ = 0.15k = 800 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
A 3 kg glider moving at 4 m/s makes a perfectly elastic head-on collision with a 4 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 3 kgm2 = 4 kgv1 = 4 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
An 8 g bullet is fired horizontally into a 5 kg block hanging from light strings 2 m long, and stays in it. The strings swing out to a largest angle of 30° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 8 gM = 5 kgL = 2 mθ = 30°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
A 7 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 16.5 kg and radius 0.4 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the acceleration a of the block.
m = 7 kgM = 16.5 kgR = 0.4 mg = 9.81 m/s²
a = m/s²
14.Rigid-body rotationHard
A uniform solid disc (mass 11 kg, radius 0.4 m) spins freely at 1000 rpm about a vertical frictionless shaft. A thin ring of mass 1 kg and the same radius is dropped onto it from rest, centred on the shaft, and the two quickly spin together. How much kinetic energy ΔE is lost in the process?
Mdisc = 11 kgMring = 1 kgR = 0.4 mn1 = 1000 rpm
ΔE = J
15.Gears & gear trainsMedium
A 15 kW motor running at 960 rpm drives a pinion with 15 teeth, which meshes with a gear with 72 teeth. The gear pair has an efficiency of 98%. Find the torque T1 on the motor shaft.
P = 15 kWn1 = 960 rpmN1 = 15N2 = 72η = 98%
T1 = N·m
16.Gears & gear trainsHard
A 1.1 kW motor at 960 rpm drives gear A (20 teeth), which meshes with gear B (40 teeth). Gear C (24 teeth) on the same shaft as B drives gear D (25 teeth) on the output shaft. Each gear mesh has an efficiency of 97%. Find the output torque Tout.
An astronaut on another planet finds that a simple pendulum 1.8 m long has a period of 2.83 s for small swings. Find the gravitational acceleration g on that planet.
L = 1.8 mT = 2.83 s
g = m/s²
18.Springs & pendulumsHard
A 1.7 kg mass on a spring with k = 350 N/m is pulled 13 cm from equilibrium and released. Find its maximum speed vmax.
m = 1.7 kgk = 350 N/mA = 13 cm
vmax = m/s
19.Mechanical vibrationsMedium
An 80 kg mass is supported by a spring with a stiffness of 100 kN/m and a viscous damper with a damping coefficient of 850 N·s/m. Find the damping ratio ζ.
m = 80 kgk = 100 kN/mc = 850 N·s/m
ζ =
20.Mechanical vibrationsHard
A 25 kg mass hangs from spring k₃ = 12 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 25 kN/m and k₂ = 25 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.
m = 25 kgk1 = 25 kN/mk2 = 25 kN/mk3 = 12 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: s = 48.23 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 100/3.6 = 27.78 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 27.78²/(2·8) = 48.23 m
Answer
s = 48.23 m
2.Kinematics
Answer: t = 13.21 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Powered phase
v₁ = 36·1.5 = 54 m/s
h₁ = ½·36·1.5² = 40.5 m
Free flight to the ground
Solve −h₁ = v₁·t₂ − ½·g·t₂² for the positive root.
t₂ = (54 + √(54² + 2·9.81·40.5))/9.81 = 11.71 s
t = 1.5 + 11.71 = 13.21 s
Answer
t = 13.21 s
3.Newton’s laws
Answer: a = 2.812 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
Both forces point down the slope; the mass cancels.
a = 9.81·(sin 15° + 0.1·cos 15°) = 3.487 m/s²
Distance
d = v₀²/(2a) = 8.5²/(2·3.487) = 10.36 m
Answer
d = 10.36 m
5.Projectile motion
Answer: H = 4.406 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 22·cos 25° = 19.94 m/s
vy = v0·sin θ = 22·sin 25° = 9.298 m/s
Highest point
At the top the vertical velocity is zero: vy² = 2gH.
H = vy²/(2g) = 9.298²/(2·9.81) = 4.406 m
Answer
H = 4.406 m
6.Projectile motion
Answer: x = 99.36 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 27·cos 55° = 15.49 m/s
vy = v0·sin θ = 27·sin 55° = 22.12 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 60 + 22.12·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (22.12 + √(489.2 + 1177))/9.81 = 6.416 s
Horizontal distance
x = vx·t = 15.49·6.416 = 99.36 m
Answer
x = 99.36 m
7.Circular motion
Answer: vmax = 12.53 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.4·9.81·40) = 12.53 m/s
Answer
vmax = 12.53 m/s (45.1 km/h)
8.Circular motion
Answer: Ttop = 60.26 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Speed at the top
Kinetic energy is traded for potential energy over a height 2r.
vtop² = 6.5² − 4·9.81·0.5 = 22.63 m²/s²
Forces at the top
Tension and gravity both point down, towards the centre.
T + m·g = m·vtop²/r
T = 1.7·22.63/0.5 − 1.7·9.81 = 60.26 N
Answer
Ttop = 60.26 N
9.Work & energy
Answer: v = 6.12 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·3·(0.7071 − 0.1·0.7071)) = 6.12 m/s
Answer
v = 6.12 m/s
10.Work & energy
Answer: x = 36.39 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 19.62·(3 − 0.15·2) = 52.97 J
Maximum compression
½kx² = 52.97 → x = √(2·52.97/800) = 0.3639 m = 36.39 cm
Answer
x = 36.39 cm
11.Momentum & collisions
Answer: v′2 = 3.429 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (3 − 4)/(3 + 4)·4 = −0.5714 m/s
v′2 = 2·3/(3 + 4)·4 = 3.429 m/s
Answer
v′2 = 3.429 m/s
12.Momentum & collisions
Answer: v = 1435 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 2·(1 − cos 30°) = 0.2679 m
Speed after impact
V = √(2·9.81·0.2679) = 2.293 m/s
Collision
v = (m + M)·V/m = 5.008·2.293/0.008 = 1435 m/s
Answer
v = 1435 m/s
13.Rigid-body rotation
Answer: a = 4.503 m/s²
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Moments of inertia
I1 = ½·11·0.4² = 0.88 kg·m²
I2 = 1·0.4² = 0.16 kg·m²
Conservation of angular momentum
n2 = n1·I1/(I1 + I2) = 1000·0.88/1.04 = 846.2 rpm
Kinetic energy before and after
E1 = ½·0.88·104.7² = 4825 J
E2 = ½·1.04·88.61² = 4083 J
ΔE = 4825 − 4083 = 742.3 J
Answer
ΔE = 742.3 J
15.Gears & gear trains
Answer: T1 = 149.2 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Motor torque
ω₁ = 2π·960/60 = 100.5 rad/s
T1 = P/ω₁ = 15000/100.5 = 149.2 N·m
Answer
T1 = 149.2 N·m
16.Gears & gear trains
Answer: Tout = 21.45 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Output speed
nout = 960·(20/40)·(24/25) = 460.8 rpm
ωout = 2π·460.8/60 = 48.25 rad/s
Output power and torque
Pout = 1100·0.97² = 1035 W
Tout = Pout/ωout = 1035/48.25 = 21.45 N·m
Answer
Tout = 21.45 N·m
17.Springs & pendulums
Answer: g = 8.873 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for g
g = 4π²·L/T² = 4π²·1.8/2.83² = 8.873 m/s²
Answer
g = 8.873 m/s²
18.Springs & pendulums
Answer: vmax = 1.865 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(350/1.7) = 14.35 rad/s
Maximum speed
vmax = A·ω = 0.13·14.35 = 1.865 m/s
Answer
vmax = 1.865 m/s
19.Mechanical vibrations
Answer: ζ = 0.1503
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(100000·80) = 5657 N·s/m
Damping ratio
ζ = c/cc = 850/5657 = 0.1503
Answer
ζ = 0.1503
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 3.131 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.