Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 3.5 m/s²car17 m/s

A car speeding at a constant 17 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3.5 m/s². How long does it take the police car to catch up? Find t.

vcar = 17 m/sapolice = 3.5 m/s²v0,police = 0
t = s
2.KinematicsHard
t (s)v (m/s)11 s

A tram starts from rest and accelerates at 3 m/s² for 11 s, then runs at constant speed for 25 s, and finally brakes at 2 m/s² until it stops. Find the total distance s between the two stops.

a1 = 3 m/s²t1 = 11 st2 = 25 sa3 = −2 m/s²
s = m
3.Newton’s lawsMedium
20 kg15°F = 140 Nμ = 0.1

A 20 kg sled is pulled across level snow by a rope at 15° above the horizontal with a force of 140 N. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the sled.

m = 20 kgF = 140 Nθ = 15°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
4 kg2 kgTF = 115 Nμ = 0.2

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 115 N pulls the front 2 kg block; the 4 kg block is towed behind. The coefficient of kinetic friction is 0.2 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 4 kgm2 = 2 kgF = 115 Nμ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 30 m/sθ = ?R = 50 m

A ball is launched from level ground at 30 m/s and must land 50 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 30 m/sR = 50 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 15 mv0​ = 30 m/s55°range

A ball is launched at 55° above horizontal from the top of a 15 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 30 m/sθ = 55°h = 15 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 85 mvmax​ = ?

A car takes a flat curve of radius 85 m. The coefficient of static friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 85 mμs = 0.5g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 1.5 mh = 5.85 m

A 0.5 kg cart is released from rest at a height of 5.85 m on a frictionless track and runs through a vertical loop of radius 1.5 m. Use g = 9.81 m/s². Find the normal force Ntop of the track on the cart at the top of the loop.

m = 0.5 kgh = 5.85 mR = 1.5 mg = 9.81 m/s²
Ntop = N
9.Work & energyMedium
40°L = 2 m1 kg

A 1 kg ball hangs on a light string of length 2 m. It is pulled aside until the string makes 40° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.

m = 1 kgL = 2 mθ = 40°g = 9.81 m/s²
T = N
10.Work & energyHard
h = 7 mR = 2 mN = ?

A 0.5 kg cart is released from rest at a height of 7 m on a smooth track that leads into a vertical circular loop of radius 2 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 0.5 kgh = 7 mR = 2 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
6 kg72 m/s9 kgv′2​ = ?

A 15 kg projectile moving horizontally at 23 m/s explodes into two fragments that move along the same line. The 6 kg fragment continues forwards at 72 m/s. Find the velocity v′2 of the 9 kg fragment (positive in the original direction).

M = 15 kgu = 23 m/sm1 = 6 kgv′1 = 72 m/sm2 = 9 kg
v′2 = m/s
12.Momentum & collisionsHard
2.5 kgv = ?8 g20°L = 2 m

An 8 g bullet is fired horizontally into a 2.5 kg block hanging from light strings 2 m long, and stays in it. The strings swing out to a largest angle of 20° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 8 gM = 2.5 kgL = 2 mθ = 20°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
n = 1700 rpmTb​ = 45 N·mI = 21.5 kg·m²

A flywheel with a moment of inertia of 21.5 kg·m² spins at 1700 rpm. A brake applies a constant friction torque of 45 N·m. How many revolutions N does the flywheel make before it stops?

I = 21.5 kg·m²n = 1700 rpmTb = 45 N·m
N = rev
14.Rigid-body rotationHard
520 m/s25 g1.54 mL = 1.6 m7 kgφ

A uniform slender rod of mass 7 kg and length 1.6 m hangs at rest from a frictionless pivot at its top end. A 25 g bullet moving horizontally at 520 m/s hits the rod 1.54 m below the pivot and stays embedded. Use g = 9.81 m/s². Find the largest angle φ from the vertical through which the rod swings.

M = 7 kgL = 1.6 mm = 25 gv = 520 m/sd = 1.54 mg = 9.81 m/s²
φ = °
15.Gears & gear trainsMedium
d1​ = 150 mmd2​ = 450 mm1500 rpmn2​ = ?

A 150 mm pulley at 1500 rpm drives a 450 mm pulley by a belt with 1 % slip. Find the speed n2 of the driven pulley.

n1 = 1500 rpmd1 = 150 mmd2 = 450 mms = 1 %
n2 = rpm
16.Gears & gear trainsHard
d1​ = 100 mmd2​ = 300 mm960 rpmC = 1000 mmθ = ?

An open belt connects a 100 mm pulley and a 300 mm pulley whose centres are 1000 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 100 mmd2 = 300 mmC = 1000 mm
θ = °
17.Springs & pendulumsMedium
L = 1.2 m

A simple pendulum has a length of 1.2 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 1.2 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
3.6 kgk = 290 N/mA = 3 cm

A 3.6 kg mass on a spring with k = 290 N/m is pulled 3 cm from equilibrium and released. Find its maximum speed vmax.

m = 3.6 kgk = 290 N/mA = 3 cm
vmax = m/s
19.Mechanical vibrationsMedium
k = 12 kN/mζ = 0.45m = 50 kg

A 50 kg mass on a spring with a stiffness of 12 kN/m has a viscous damper giving a damping ratio of 0.45. Find the damped natural frequency fd of its free vibration in Hz.

m = 50 kgk = 12 kN/mζ = 0.45
fd = Hz
20.Mechanical vibrationsHard
k1​ = 40k2​ = 40k3​ = 100m = 25 kg

A 25 kg mass hangs from spring k₃ = 100 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 40 kN/m and k₂ = 40 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 40 kN/mk2 = 40 kN/mk3 = 100 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 9.714 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·17/3.5 = 9.714 s

Answer

t = 9.714 s

At that moment the police car moves at 2v = 34 m/s.

2.Kinematics

Answer: s = 1279 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Top speed

v = a1·t1 = 3·11 = 33 m/s

Distance of each phase

s1 = ½·3·11² = 181.5 m
s2 = 33·25 = 825 m
s3 = 33²/(2·2) = 272.3 m

Total distance

s = 181.5 + 825 + 272.3 = 1279 m

Answer

s = 1279 m
3.Newton’s laws

Answer: a = 5.962 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Normal force

N = m·g − F·sin θ = 196.2 − 140·sin 15° = 160 N

Horizontal forces

m·a = F·cos θ − μ·N = 135.2 − 16
a = 119.2/20 = 5.962 m/s²

Answer

a = 5.962 m/s²
4.Newton’s laws

Answer: T = 76.67 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (115 − 11.77)/6 = 17.2 m/s²

Rear block alone

T = m1·(a + μ·g) = 4·(17.2 + 1.962) = 76.67 N

Answer

T = 76.67 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: θ = 16.51 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·50/30² = 0.545

Angle

2θ = 33.02° → θ = 16.51°

Answer

θ = 16.51°

The other solution is 90° − θ = 73.49°.

6.Projectile motion

Answer: t = 5.56 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 30·cos 55° = 17.21 m/s
vy = v0·sin θ = 30·sin 55° = 24.57 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 15 + 24.57·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (24.57 + √(603.9 + 294.3))/9.81 = 5.56 s

Answer

t = 5.56 s
7.Circular motion

Answer: vmax = 20.42 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.5·9.81·85) = 20.42 m/s

Answer

vmax = 20.42 m/s (73.51 km/h)
8.Circular motion

Answer: Ntop = 13.73 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·(5.85 − 2·1.5) = 55.92 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R − m·g = 0.5·55.92/1.5 − 4.905 = 13.73 N

Answer

Ntop = 13.73 N
9.Work & energy

Answer: T = 14.4 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the bottom

v² = 2gL(1 − cos θ) = 2·9.81·2·(1 − cos 40°) = 9.18 m²/s²

Forces at the bottom

m·g = 1·9.81 = 9.81 N
T = mg + mv²/L = 9.81 + 1·9.18/2 = 14.4 N

Answer

T = 14.4 N

Check: T = mg(3 − 2cos θ) = 14.4 N.

10.Work & energy

Answer: N = 9.81 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(7 − 4) = 58.86 m²/s²

Forces at the top

m·g = 0.5·9.81 = 4.905 N
N = mv²/R − mg = 0.5·58.86/2 − 4.905 = 9.81 N

Answer

N = 9.81 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′2 = −9.667 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 15·23 = 345 kg·m/s

Momentum after

345 = 6·72 + 9·v′2
v′2 = (345 − 432)/9 = −9.667 m/s

Answer

v′2 = −9.667 m/s

The minus sign means the second fragment flies backwards.

12.Momentum & collisions

Answer: v = 482.3 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 2·(1 − cos 20°) = 0.1206 m

Speed after impact

V = √(2·9.81·0.1206) = 1.538 m/s

Collision

v = (m + M)·V/m = 2.508·1.538/0.008 = 482.3 m/s

Answer

v = 482.3 m/s
13.Rigid-body rotation

Answer: N = 1205 rev

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1700/60 = 178 rad/s

Work of the brake equals the kinetic energy

½·I·ω² = ½·21.5·178² = 340693 J
θ = 340693/45 = 7571 rad

Revolutions

N = θ/2π = 1205 rev

Answer

N = 1205 rev
14.Rigid-body rotation

Answer: φ = 66.46 °

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 7·1.6²/3 + 0.025·1.54² = 6.033 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.025·520·1.54/6.033 = 3.319 rad/s

Energy during the swing

½·I·ω² = ½·6.033·3.319² = 33.22 J
(M·g·L/2 + m·g·d)·(1 − cos φ) = 55.31·(1 − cos φ)
cos φ = 1 − 33.22/55.31 = 0.3994 → φ = 66.46°

Answer

φ = 66.46°
15.Gears & gear trains

Answer: n2 = 495 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1500·150/450 = 500 rpm

With slip

n2 = 500·0.99 = 495 rpm

Answer

n2 = 495 rpm
16.Gears & gear trains

Answer: θ = 168.5 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.1) = 5.739°

Angle of wrap

θ = 180 − 2·5.739 = 168.5°

Answer

θ = 168.5°
17.Springs & pendulums

Answer: T = 2.198 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(1.2/9.81) = 2.198 s

Answer

T = 2.198 s
18.Springs & pendulums

Answer: vmax = 0.2693 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(290/3.6) = 8.975 rad/s

Maximum speed

vmax = A·ω = 0.03·8.975 = 0.2693 m/s

Answer

vmax = 0.2693 m/s
19.Mechanical vibrations

Answer: fd = 2.202 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(12000/50) = 15.49 rad/s
fn = 15.49/(2π) = 2.466 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 2.466·√(1 − 0.45²) = 2.202 Hz

Answer

fd = 2.202 Hz
20.Mechanical vibrations

Answer: fn = 6.711 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 40 + 40 = 80 kN/m
keq = 80·100/(80 + 100) = 44.44 kN/m

Natural frequency

ωn = √(44444/25) = 42.16 rad/s
fn = 42.16/(2π) = 6.711 Hz

Answer

fn = 6.711 Hz

ExamProblems · examproblems.com/courses/dynamics