Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?15

A car driving at 54 km/h brakes with a constant deceleration of 6.5 m/s² until it stops. How long does braking take? Find t.

v₀ = 54 km/ha = −6.5 m/s²v = 0
t = s
2.KinematicsHard
v₀ = 7 m/s20 m

A ball is thrown straight up at 7 m/s from the edge of a roof 20 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 7 m/sh₀ = 20 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 30°a = ?m = 5 kg

A 5 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 5 kgθ = 30°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 8.5 kg5.5 kgμ = 0.1

An 8.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5.5 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 8.5 kgm2 = 5.5 kgμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 40 m/sθ = ?R = 115 m

A ball is launched from level ground at 40 m/s and must land 115 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 40 m/sR = 115 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 25 mv0​ = 12 m/s20°range

A ball is launched at 20° above horizontal from the top of a 25 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 12 m/sθ = 20°h = 25 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 2.2 mω = ?

In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 2.2 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.5. Use g = 9.81 m/s². Find the smallest angular speed ω in rad/s.

r = 2.2 mμs = 0.5g = 9.81 m/s²
ω = rad/s
8.Circular motionHard
r = 0.8 mv = 6.5 m/s

A 0.4 kg ball on a string 0.8 m long is swung in a vertical circle. At the lowest point it moves at 6.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 0.4 kgr = 0.8 mv = 6.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
45°d = 9 mμ = 0.35

A 0.5 kg block slides 9 m down a slope at 45° to the horizontal, with a coefficient of kinetic friction of 0.35. Find the work Wf done against friction.

m = 0.5 kgθ = 45°μ = 0.35d = 9 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
k = 1000 N/m25°μ = 0.33 kg

A spring of stiffness 1000 N/m at the bottom of a 25° slope is compressed by 12 cm against a 3 kg block and released. The coefficient of kinetic friction between block and slope is 0.3. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)

m = 3 kgk = 1000 N/mx = 12 cmθ = 25°μ = 0.3g = 9.81 m/s²
d = m
11.Momentum & collisionsMedium
1 kg81 m/s8 kgv′2​ = ?

A 9 kg projectile moving horizontally at 21 m/s explodes into two fragments that move along the same line. The 1 kg fragment continues forwards at 81 m/s. Find the velocity v′2 of the 8 kg fragment (positive in the original direction).

M = 9 kgu = 21 m/sm1 = 1 kgv′1 = 81 m/sm2 = 8 kg
v′2 = m/s
12.Momentum & collisionsHard
19 m/s18 m/s

A 0.35 kg ball hits a wall at 19 m/s and bounces straight back at 18 m/s. The contact lasts 50 ms. Find the average force Favg of the wall on the ball.

m = 0.35 kgvin = 19 m/svout = 18 m/sΔt = 50 ms
Favg = N
13.Rigid-body rotationMedium
n = 1900 rpmT = 140 N·m

A motor delivers a torque of 140 N·m at 1900 rpm. Find its power output P in kW.

T = 140 N·mn = 1900 rpm
P = kW
14.Rigid-body rotationHard
θ = 30°a

A hollow sphere rolls without slipping down a slope inclined at 30° to the horizontal. Use g = 9.81 m/s². Find the smallest coefficient of static friction μs that prevents it from slipping.

θ = 30°I = (2/3)·m·r²g = 9.81 m/s²
μs =
15.Gears & gear trainsMedium
N1​ = 12N2​ = 50

A 1.1 kW motor running at 1500 rpm drives a pinion with 12 teeth, which meshes with a gear with 50 teeth. The gear pair has an efficiency of 95%. Find the torque T1 on the motor shaft.

P = 1.1 kWn1 = 1500 rpmN1 = 12N2 = 50η = 95%
T1 = N·m
16.Gears & gear trainsHard
d1​ = 100 mmd2​ = 300 mm1500 rpmC = 600 mmT1​ = 1200 NT2​P = ?

An open belt connects a 100 mm driving pulley at 1500 rpm to a 300 mm pulley; the centres are 600 mm apart. The coefficient of friction is 0.35 and the tight-side tension may not exceed 1200 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 100 mmn1 = 1500 rpmd2 = 300 mmC = 600 mmμ = 0.35T1 = 1200 N
P = kW
17.Springs & pendulumsMedium
L = 0.9 m

A simple pendulum has a length of 0.9 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 0.9 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
2 kgk = 400 N/m200 m/s

A 10 g bullet moving at 200 m/s hits and stays in a 2 kg block resting on a frictionless surface. The block is attached to a horizontal spring with k = 400 N/m. Find the amplitude A of the resulting oscillation in cm.

m = 10 gv = 200 m/sM = 2 kgk = 400 N/m
A = cm
19.Mechanical vibrationsMedium
k = 80 kN/mζ = 0.45m = 15 kg

A 15 kg mass on a spring with a stiffness of 80 kN/m has a viscous damper giving a damping ratio of 0.45. Find the damped natural frequency fd of its free vibration in Hz.

m = 15 kgk = 80 kN/mζ = 0.45
fd = Hz
20.Mechanical vibrationsHard
k1​ = 20k2​ = 20m = 10 kg

A 10 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 20 kN/m and the lower one k₂ = 20 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 10 kgk1 = 20 kN/mk2 = 20 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 2.308 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 54/3.6 = 15 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 15/6.5 = 2.308 s

Answer

t = 2.308 s
2.Kinematics

Answer: hmax = 22.5 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 7²/(2·9.81) = 2.497 m

Height above the ground

hmax = 20 + 2.497 = 22.5 m

Answer

hmax = 22.5 m
3.Newton’s laws

Answer: a = 3.206 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 30° − 0.2·cos 30°) = 9.81·(0.5 − 0.1732) = 3.206 m/s²

Answer

a = 3.206 m/s²
4.Newton’s laws

Answer: T = 36.03 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (53.96 − 8.339)/14 = 3.258 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 8.5·3.258 + 8.339 = 36.03 N

Answer

T = 36.03 N
5.Projectile motion

Answer: θ = 22.42 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·115/40² = 0.7051

Angle

2θ = 44.84° → θ = 22.42°

Answer

θ = 22.42°

The other solution is 90° − θ = 67.58°.

6.Projectile motion

Answer: t = 2.714 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 12·cos 20° = 11.28 m/s
vy = v0·sin θ = 12·sin 20° = 4.104 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 25 + 4.104·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (4.104 + √(16.84 + 490.5))/9.81 = 2.714 s

Answer

t = 2.714 s
7.Circular motion

Answer: ω = 2.986 rad/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces on a rider

N = m·ω²·r
μ·N = m·g → μ·ω²·r = g

Angular speed

ω = √(g/(μ·r)) = √(9.81/(0.5·2.2)) = 2.986 rad/s

Answer

ω = 2.986 rad/s
8.Circular motion

Answer: T = 25.05 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 0.4·9.81 + 0.4·6.5²/0.8 = 3.924 + 21.13 = 25.05 N

Answer

T = 25.05 N
9.Work & energy

Answer: Wf = 10.93 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 4.905·0.7071 = 3.468 N
F = μN = 0.35·3.468 = 1.214 N

Work against friction

Wf = F·d = 1.214·9 = 10.93 J

Answer

Wf = 10.93 J
10.Work & energy

Answer: d = 0.3523 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 12 cm = 0.12 m
½kx² = ½·1000·0.12² = 7.2 J

Energy balance along the slope

m·g = 3·9.81 = 29.43 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 7.2/(29.43·(0.4226 + 0.3·0.9063)) = 0.3523 m

Answer

d = 0.3523 m
11.Momentum & collisions

Answer: v′2 = 13.5 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 9·21 = 189 kg·m/s

Momentum after

189 = 1·81 + 8·v′2
v′2 = (189 − 81)/8 = 13.5 m/s

Answer

v′2 = 13.5 m/s
12.Momentum & collisions

Answer: Favg = 259 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.35·(18 + 19) = 12.95 N·s

Average force

Favg = J/Δt = 12.95/0.05 = 259 N

Answer

Favg = 259 N
13.Rigid-body rotation

Answer: P = 27.86 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1900/60 = 199 rad/s

Power

P = T·ω = 140·199 = 27855 W = 27.86 kW

Answer

P = 27.86 kW
14.Rigid-body rotation

Answer: μs = 0.2309

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.6667·m·r²·(a/r) → f = 0.6667·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 30°/1.667 = 2.943 m/s²

Friction needed

f = c·m·a ≤ μ·m·g·cos θ → μ ≥ c·tan θ/(1 + c)
μs = 0.6667·tan 30°/1.667 = 0.2309

Answer

μs = 0.2309
15.Gears & gear trains

Answer: T1 = 7.003 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 1100/157.1 = 7.003 N·m

Answer

T1 = 7.003 N·m
16.Gears & gear trains

Answer: P = 5.896 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.807 rad

Slack-side tension

eμθ = e0.9823 = 2.671, T₂ = 1200/2.671 = 449.3 N

Power

P = (1200 − 449.3)·7.854 = 5.896 kW

Answer

P = 5.896 kW
17.Springs & pendulums

Answer: T = 1.903 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(0.9/9.81) = 1.903 s

Answer

T = 1.903 s
18.Springs & pendulums

Answer: A = 7.053 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Speed after impact

V = m·v/(m + M) = 0.01·200/2.01 = 0.995 m/s

Angular frequency

ω = √(k/(m + M)) = √(400/2.01) = 14.11 rad/s

Amplitude

A = V/ω = 0.995/14.11 = 0.07053 m = 7.053 cm

Answer

A = 7.053 cm
19.Mechanical vibrations

Answer: fd = 10.38 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(80000/15) = 73.03 rad/s
fn = 73.03/(2π) = 11.62 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 11.62·√(1 − 0.45²) = 10.38 Hz

Answer

fd = 10.38 Hz
20.Mechanical vibrations

Answer: fn = 5.033 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/20 + 1/20 → keq = 20·20/(20 + 20) = 10 kN/m

Natural frequency

ωn = √(10000/10) = 31.62 rad/s
fn = 31.62/(2π) = 5.033 Hz

Answer

fn = 5.033 Hz

ExamProblems · examproblems.com/courses/dynamics