In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car speeding at a constant 35 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 4.5 m/s². How long does it take the police car to catch up? Find t.
vcar = 35 m/sapolice = 4.5 m/s²v0,police = 0
t = s
2.KinematicsHard
A ball is thrown straight up at 18 m/s from the edge of a roof 35 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 18 m/sh₀ = 35 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 19 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 19 kgθ = 40°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 4 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 4.5 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 4 kgm2 = 4.5 kgμ = 0g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is kicked from level ground at 20 m/s and 50° above the horizontal towards a wall 12 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 20 m/sθ = 50°x = 12 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is launched at 55° above horizontal from the top of a 45 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 32 m/sθ = 55°h = 45 mg = 9.81 m/s²
x = m
7.Circular motionMedium
A car takes a flat curve of radius 80 m. The coefficient of static friction between tyres and road is 0.8. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 80 mμs = 0.8g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A 0.2 kg ball on a string 0.6 m long is swung in a vertical circle. At the lowest point it moves at 6.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 0.2 kgr = 0.6 mv = 6.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
An 800 kg car drives up a 2° slope at a constant 36 km/h. Air resistance and rolling resistance together amount to 800 N. Find the power P the wheels must deliver, in kW.
A 4 kg block rests on a rough horizontal table (μ = 0.3). A light string runs from it over a smooth pulley at the edge of the table to a hanging 6 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 2 m.
m1 = 4 kgm2 = 6 kgμ = 0.3d = 2 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
A 20 kg projectile moving horizontally at 7 m/s explodes into two fragments that move along the same line. The 13 kg fragment continues forwards at 66 m/s. Find the velocity v′2 of the 7 kg fragment (positive in the original direction).
M = 20 kgu = 7 m/sm1 = 13 kgv′1 = 66 m/sm2 = 7 kg
v′2 = m/s
12.Momentum & collisionsHard
At a crossing a 900 kg car travelling east at 17 m/s collides with a 1700 kg car travelling north at 9 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.
m1 = 900 kgv1 = 17 m/s (E)m2 = 1700 kgv2 = 9 m/s (N)
θ = °
13.Rigid-body rotationMedium
A flywheel with a moment of inertia of 8.5 kg·m² spins at 2500 rpm. A brake applies a constant friction torque of 90 N·m. How many revolutions N does the flywheel make before it stops?
I = 8.5 kg·m²n = 2500 rpmTb = 90 N·m
N = rev
14.Rigid-body rotationHard
A thin hoop rolls without slipping down a slope inclined at 10° to the horizontal. Use g = 9.81 m/s². Find the smallest coefficient of static friction μs that prevents it from slipping.
θ = 10°I = m·r²g = 9.81 m/s²
μs =
15.Gears & gear trainsMedium
A 7.5 kW motor running at 960 rpm drives a pinion with 20 teeth and a module of 3 mm. Find the tangential force Ft on the pinion teeth.
P = 7.5 kWn = 960 rpmN1 = 20m = 3 mm
Ft = N
16.Gears & gear trainsHard
In a compound gear train, gear A (24 teeth) on the input shaft turns at 2880 rpm and drives gear B (72 teeth). Gear C (24 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 480 rpm. How many teeth ND must gear D have?
nin = 2880 rpmA = 24B = 72C = 24nout = 480 rpm
ND =
17.Springs & pendulumsMedium
A 2.4 kg mass on a spring with k = 400 N/m oscillates on a frictionless surface with an amplitude of 17 cm. Find its speed v when it is 11 cm from equilibrium.
m = 2.4 kgk = 400 N/mA = 17 cmx = 11 cm
v = m/s
18.Springs & pendulumsHard
A 0.7 kg mass is attached to the lower end of an unstretched vertical spring with k = 230 N/m and released from rest. Use g = 9.81 m/s². Find the greatest extension xmax of the spring in cm.
m = 0.7 kgk = 230 N/mg = 9.81 m/s²
xmax = cm
19.Mechanical vibrationsMedium
In a free-vibration test of a damped mass–spring system, a displacement peak of 50 mm is followed 2 cycles later by a peak of 30.2 mm. Find the damping ratio ζ.
x0 = 50 mmx2 = 30.2 mmn = 2
ζ =
20.Mechanical vibrationsHard
A 50 kg mass hangs from spring k₃ = 100 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 60 kN/m and k₂ = 5 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.
m = 50 kgk1 = 60 kN/mk2 = 5 kN/mk3 = 100 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: t = 15.56 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·35/4.5 = 15.56 s
Answer
t = 15.56 s
At that moment the police car moves at 2v = 70 m/s.
2.Kinematics
Answer: t = 5.076 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−35 = 18·t − ½·9.81·t²
4.905·t² − 18·t − 35 = 0
Solve the quadratic
Only the positive root is physical.
t = (18 + √(18² + 2·9.81·35))/9.81 = 5.076 s
Answer
t = 5.076 s
3.Newton’s laws
Answer: a = 5.179 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 20·cos 50° = 12.86 m/s
t = x/vx = 12/12.86 = 0.9334 s
Height at that time
y = 15.32·0.9334 − ½·9.81·0.9334² = 10.03 m
Answer
y = 10.03 m
The ball is still rising at the wall.
6.Projectile motion
Answer: x = 123.2 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 32·cos 55° = 18.35 m/s
vy = v0·sin θ = 32·sin 55° = 26.21 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 45 + 26.21·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (26.21 + √(687.1 + 882.9))/9.81 = 6.711 s
Horizontal distance
x = vx·t = 18.35·6.711 = 123.2 m
Answer
x = 123.2 m
7.Circular motion
Answer: vmax = 25.06 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.8·9.81·80) = 25.06 m/s
Answer
vmax = 25.06 m/s (90.2 km/h)
8.Circular motion
Answer: T = 16.05 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 0.2·9.81 + 0.2·6.5²/0.6 = 1.962 + 14.08 = 16.05 N
Answer
T = 16.05 N
9.Work & energy
Answer: P = 10.74 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 800·9.81 = 7848 N
mg·sin θ = 7848·sin 2° = 273.9 N
F = 273.9 + 800 = 1074 N
Power
v = 36/3.6 = 10 m/s
P = F·v = 1074·10 = 10739 W = 10.74 kW
Answer
P = 10.74 kW
10.Work & energy
Answer: v = 4.34 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy released and lost
m₂g·d = 58.86·2 = 117.7 J
μ·m₁g·d = 0.3·39.24·2 = 23.54 J
Kinetic energy of both blocks
½(m₁ + m₂)v² = 94.18 → v = √(2·94.18/10) = 4.34 m/s
Answer
v = 4.34 m/s
11.Momentum & collisions
Answer: v′2 = −102.6 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum before
p = M·u = 20·7 = 140 kg·m/s
Momentum after
140 = 13·66 + 7·v′2
v′2 = (140 − 858)/7 = −102.6 m/s
Answer
v′2 = −102.6 m/s
The minus sign means the second fragment flies backwards.
12.Momentum & collisions
Answer: θ = 45 °
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum components
px = 900·17 = 15300 kg·m/s
py = 1700·9 = 15300 kg·m/s
Direction
tan θ = py/px = 1 → θ = 45°
Answer
θ = 45°
13.Rigid-body rotation
Answer: N = 515.1 rev
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·2500/60 = 261.8 rad/s
Work of the brake equals the kinetic energy
½·I·ω² = ½·8.5·261.8² = 291290 J
θ = 291290/90 = 3237 rad
Revolutions
N = θ/2π = 515.1 rev
Answer
N = 515.1 rev
14.Rigid-body rotation
Answer: μs = 0.08816
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Equations of motion
m·g·sin θ − f = m·a
f·r = I·α = 1·m·r²·(a/r) → f = 1·m·a
Acceleration
a = g·sin θ/(1 + c) = 9.81·sin 10°/2 = 0.8517 m/s²
Friction needed
f = c·m·a ≤ μ·m·g·cos θ → μ ≥ c·tan θ/(1 + c)
μs = 1·tan 10°/2 = 0.08816
Answer
μs = 0.08816
15.Gears & gear trains
Answer: Ft = 2487 N
Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.
Torque on the pinion
ω = 2π·960/60 = 100.5 rad/s
T = P/ω = 7500/100.5 = 74.6 N·m
Pitch diameter
d = m·N = 3·20 = 60 mm
Tangential force
Ft = 2T/d = 2·74.6/0.06 = 2487 N
Answer
Ft = 2487 N
16.Gears & gear trains
Answer: ND = 48
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Intermediate shaft speed
nB = nC = 2880·24/72 = 960 rpm
Teeth on gear D
ND = C·nC/nout = 24·960/480 = 48
Answer
ND = 48
17.Springs & pendulums
Answer: v = 1.673 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(400/2.4) = 12.91 rad/s
Speed at x
v = ω·√(A² − x²) = 12.91·√(0.17² − 0.11²) = 1.673 m/s
Answer
v = 1.673 m/s
18.Springs & pendulums
Answer: xmax = 5.971 cm
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Equilibrium and amplitude
x₀ = m·g/k = 0.7·9.81/230 = 0.02986 m = A
Lowest point
xmax = 2A = 0.05971 m = 5.971 cm
Answer
xmax = 5.971 cm
19.Mechanical vibrations
Answer: ζ = 0.04009
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.