Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)4.615 s30

A car driving at 108 km/h brakes with a constant deceleration of 6.5 m/s² until it stops. Find the braking distance s.

v₀ = 108 km/ha = −6.5 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 14 m/s10 m

A ball is thrown straight up at 14 m/s from the edge of a roof 10 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 14 m/sh₀ = 10 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 25°a = ?m = 12 kg

A 12 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 12 kgθ = 25°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 4 kg5 kgμ = 0.25

A 4 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5 kg mass. The coefficient of kinetic friction between block and table is 0.25. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 4 kgm2 = 5 kgμ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 22 m/s50°rangeH = ?

A ball is launched at 50° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 22 m/sθ = 50°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 50 mv0​ = 25 m/s50°range

A ball is launched at 50° above horizontal from the top of a 50 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 25 m/sθ = 50°h = 50 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 25 mvmax​ = ?

A car takes a flat curve of radius 25 m. The coefficient of static friction between tyres and road is 0.4. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 25 mμs = 0.4g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.3 m10.5 m/svtop​ = ?

A 0.6 kg ball on a light string 1.3 m long is swung in a vertical circle. At the lowest point its speed is 10.5 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 0.6 kgr = 1.3 mvbottom = 10.5 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
80 km/h

A car travelling at 80 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.6. Find the stopping distance d.

v = 80 km/hμ = 0.6g = 9.81 m/s²
d = m
10.Work & energyHard
h = 10.4 mR = 4 mN = ?

A 5 kg cart is released from rest at a height of 10.4 m on a smooth track that leads into a vertical circular loop of radius 4 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 5 kgh = 10.4 mR = 4 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
1 kg3 m/s0.5 kg

A 1 kg glider moving at 3 m/s makes a perfectly elastic head-on collision with a 0.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 1 kgm2 = 0.5 kgv1 = 3 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
22 m/s9 m/s

A 0.2 kg ball hits a wall at 22 m/s and bounces straight back at 9 m/s. The contact lasts 10 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.2 kgvin = 22 m/svout = 9 m/sΔt = 10 ms
J = N·s
13.Rigid-body rotationMedium
L = 2.6 mm = 4 kgα

A uniform slender rod of mass 4 kg and length 2.6 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 4 kgL = 2.6 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
θ = 20°vs = 8 m

A solid cylinder starts from rest and rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 8 m along the slope.

θ = 20°s = 8 mI = ½·m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
d1​ = 160 mmd2​ = 500 mm1450 rpmT1​ = 800 NT2​ = 320 NP = ?

A belt runs on a 160 mm driving pulley at 1450 rpm. The tension is 800 N on the tight side and 320 N on the slack side. Find the power P transmitted, in kW.

d1 = 160 mmn1 = 1450 rpmT1 = 800 NT2 = 320 N
P = kW
16.Gears & gear trainsHard
d1​ = 80 mmd2​ = 315 mm1440 rpmC = 800 mmT1​ = 600 NT2​P = ?

An open belt connects an 80 mm driving pulley at 1440 rpm to a 315 mm pulley; the centres are 800 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 600 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 80 mmn1 = 1440 rpmd2 = 315 mmC = 800 mmμ = 0.25T1 = 600 N
P = kW
17.Springs & pendulumsMedium
L = 1.4 m

A simple pendulum has a length of 1.4 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 1.4 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
3.5 kgk = 80 N/mA = 8 cm

A 3.5 kg mass on a spring with k = 80 N/m is pulled 8 cm from equilibrium and released. Find its maximum acceleration amax.

m = 3.5 kgk = 80 N/mA = 8 cm
amax = m/s²
19.Mechanical vibrationsMedium
tx40 mm4 cycles5.3 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 40 mm is followed 4 cycles later by a peak of 5.3 mm. Find the damping ratio ζ.

x0 = 40 mmx4 = 5.3 mmn = 4
ζ =
20.Mechanical vibrationsHard
k1​ = 80k2​ = 30k3​ = 25m = 20 kg

A 20 kg mass hangs from spring k₃ = 25 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 80 kN/m and k₂ = 30 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 20 kgk1 = 80 kN/mk2 = 30 kN/mk3 = 25 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 69.23 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 108/3.6 = 30 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 30²/(2·6.5) = 69.23 m

Answer

s = 69.23 m
2.Kinematics

Answer: hmax = 19.99 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 14²/(2·9.81) = 9.99 m

Height above the ground

hmax = 10 + 9.99 = 19.99 m

Answer

hmax = 19.99 m
3.Newton’s laws

Answer: a = 2.368 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 25° − 0.2·cos 25°) = 9.81·(0.4226 − 0.1813) = 2.368 m/s²

Answer

a = 2.368 m/s²
4.Newton’s laws

Answer: T = 27.25 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (49.05 − 9.81)/9 = 4.36 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 4·4.36 + 9.81 = 27.25 N

Answer

T = 27.25 N
5.Projectile motion

Answer: H = 14.48 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 22·cos 50° = 14.14 m/s
vy = v0·sin θ = 22·sin 50° = 16.85 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 16.85²/(2·9.81) = 14.48 m

Answer

H = 14.48 m
6.Projectile motion

Answer: t = 5.694 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 25·cos 50° = 16.07 m/s
vy = v0·sin θ = 25·sin 50° = 19.15 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 50 + 19.15·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (19.15 + √(366.8 + 981))/9.81 = 5.694 s

Answer

t = 5.694 s
7.Circular motion

Answer: vmax = 9.905 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.4·9.81·25) = 9.905 m/s

Answer

vmax = 9.905 m/s (35.66 km/h)
8.Circular motion

Answer: Ttop = 21.45 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 10.5² − 4·9.81·1.3 = 59.24 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 0.6·59.24/1.3 − 0.6·9.81 = 21.45 N

Answer

Ttop = 21.45 N
9.Work & energy

Answer: d = 41.95 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Speed in base units

v = 80/3.6 = 22.22 m/s

Energy balance

½mv² = μmg·d → d = v²/(2μg) = 22.22²/(2·0.6·9.81) = 41.95 m

Answer

d = 41.95 m

Doubling the speed makes the stopping distance four times longer.

10.Work & energy

Answer: N = 9.81 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(10.4 − 8) = 47.09 m²/s²

Forces at the top

m·g = 5·9.81 = 49.05 N
N = mv²/R − mg = 5·47.09/4 − 49.05 = 9.81 N

Answer

N = 9.81 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′1 = 1 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (1 − 0.5)/(1 + 0.5)·3 = 1 m/s
v′2 = 2·1/(1 + 0.5)·3 = 4 m/s

Answer

v′1 = 1 m/s
12.Momentum & collisions

Answer: J = 6.2 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.2·(9 + 22) = 6.2 N·s

Answer

J = 6.2 N·s
13.Rigid-body rotation

Answer: R = 9.81 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.6) = 5.66 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 4·(9.81 − 7.357) = 9.81 N

Answer

R = 9.81 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: v = 5.982 m/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 8·sin 20° = 2.736 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.5)
v = √(2·9.81·2.736/1.5) = 5.982 m/s

Answer

v = 5.982 m/s
15.Gears & gear trains

Answer: P = 5.831 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 12.15 m/s

Power

P = (800 − 320)·12.15 = 5831 W = 5.831 kW

Answer

P = 5.831 kW
16.Gears & gear trains

Answer: P = 1.843 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.847 rad

Slack-side tension

eμθ = e0.7117 = 2.037, T₂ = 600/2.037 = 294.5 N

Power

P = (600 − 294.5)·6.032 = 1.843 kW

Answer

P = 1.843 kW
17.Springs & pendulums

Answer: T = 2.374 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(1.4/9.81) = 2.374 s

Answer

T = 2.374 s
18.Springs & pendulums

Answer: amax = 1.829 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(80/3.5) = 4.781 rad/s

Maximum acceleration

amax = A·ω² = 0.08·4.781² = 1.829 m/s²

Answer

amax = 1.829 m/s²
19.Mechanical vibrations

Answer: ζ = 0.08016

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/4)·ln(40/5.3) = 0.5053

Damping ratio

ζ = δ/√(4π² + δ²) = 0.5053/√(39.48 + 0.2553) = 0.08016

Answer

ζ = 0.08016
20.Mechanical vibrations

Answer: fn = 5.079 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 80 + 30 = 110 kN/m
keq = 110·25/(110 + 25) = 20.37 kN/m

Natural frequency

ωn = √(20370/20) = 31.91 rad/s
fn = 31.91/(2π) = 5.079 Hz

Answer

fn = 5.079 Hz

ExamProblems · examproblems.com/courses/dynamics