Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?30

A car driving at 108 km/h brakes with a constant deceleration of 6.5 m/s² until it stops. How long does braking take? Find t.

v₀ = 108 km/ha = −6.5 m/s²v = 0
t = s
2.KinematicsHard
v₀ = 9 m/s20 m

A ball is thrown straight up at 9 m/s from the edge of a roof 20 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 9 m/sh₀ = 20 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 20°a = ?m = 7 kg

A 7 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 7 kgθ = 20°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 1 kg4 kgμ = 0.2

A 1 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 4 kg mass. The coefficient of kinetic friction between block and table is 0.2. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 1 kgm2 = 4 kgμ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
10 my = ?v0​ = 12 m/s55°

A ball is kicked from level ground at 12 m/s and 55° above the horizontal towards a wall 10 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 12 m/sθ = 55°x = 10 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 25 mv0​ = 22 m/s55°x = ?

A ball is launched at 55° above horizontal from the top of a 25 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 22 m/sθ = 55°h = 25 mg = 9.81 m/s²
x = m
7.Circular motionMedium
L = 1.5 m40°

A small ball on a string of length 1.5 m moves in a horizontal circle so that the string makes a constant angle of 40° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the time T for one revolution.

L = 1.5 mθ = 40°g = 9.81 m/s²
T = s
8.Circular motionHard
r = 0.7 mv = ?

A ball on a string 0.7 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 0.7 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
45°d = 12 mμ = 0.4

A block slides from rest down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.4. Find its speed v after it has slid 12 m along the slope.

θ = 45°μ = 0.4d = 12 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 1 mL = 1 mμ = 0.15k = 2500 N/m

A 0.5 kg block is released from rest at height 1 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1 m long (μ = 0.15) and then runs onto a spring (k = 2500 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 0.5 kgh = 1 mL = 1 mμ = 0.15k = 2500 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
1900 kg7 m/s2000 kg

A 1900 kg car moving at 7 m/s runs into a stationary 2000 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?

m1 = 1900 kgv1 = 7 m/sm2 = 2000 kgv2 = 0
ΔK/K = %
12.Momentum & collisionsHard
27 m/s17 m/s

A 0.3 kg ball hits a wall at 27 m/s and bounces straight back at 17 m/s. The contact lasts 20 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.3 kgvin = 27 m/svout = 17 m/sΔt = 20 ms
J = N·s
13.Rigid-body rotationMedium
0 → 400 rpmI = 38.5 kg·m²

A motor brings a flywheel with a moment of inertia of 38.5 kg·m² from rest up to 400 rpm in 56 s. Ignoring losses, find the average power Pavg it delivers, in kW.

I = 38.5 kg·m²n = 400 rpmt = 56 s
Pavg = kW
14.Rigid-body rotationHard
θ = 35°as = 5.5 m

A solid cylinder rolls without slipping down a slope inclined at 35° to the horizontal. Use g = 9.81 m/s². It starts from rest. How long t does it take to roll 5.5 m down the slope?

θ = 35°I = ½·m·r²g = 9.81 m/s²s = 5.5 m
t = s
15.Gears & gear trainsMedium
d1​ = 150 mmd2​ = 450 mm1500 rpmn2​ = ?

A 150 mm pulley at 1500 rpm drives a 450 mm pulley by a belt with 1 % slip. Find the speed n2 of the driven pulley.

n1 = 1500 rpmd1 = 150 mmd2 = 450 mms = 1 %
n2 = rpm
16.Gears & gear trainsHard
A = 16B = 32C = 24D = 48

A 1.1 kW motor at 960 rpm drives gear A (16 teeth), which meshes with gear B (32 teeth). Gear C (24 teeth) on the same shaft as B drives gear D (48 teeth) on the output shaft. Each gear mesh has an efficiency of 98%. Find the output torque Tout.

P = 1.1 kWnin = 960 rpmA = 16B = 32C = 24D = 48ηmesh = 98%
Tout = N·m
17.Springs & pendulumsMedium
L = 2 mT = 4.61 s

An astronaut on another planet finds that a simple pendulum 2 m long has a period of 4.61 s for small swings. Find the gravitational acceleration g on that planet.

L = 2 mT = 4.61 s
g = m/s²
18.Springs & pendulumsHard
2.7 kgk = 270 N/mA = 2 cm

A 2.7 kg mass on a spring with k = 270 N/m is pulled 2 cm from equilibrium and released. Find its maximum acceleration amax.

m = 2.7 kgk = 270 N/mA = 2 cm
amax = m/s²
19.Mechanical vibrationsMedium
k = 15 kN/mc = 120 N·s/mm = 25 kg

A 25 kg mass is supported by a spring with a stiffness of 15 kN/m and a viscous damper with a damping coefficient of 120 N·s/m. Find the damping ratio ζ.

m = 25 kgk = 15 kN/mc = 120 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 50k2​ = 12k3​ = 60m = 5 kg

A 5 kg mass hangs from spring k₃ = 60 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 50 kN/m and k₂ = 12 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 50 kN/mk2 = 12 kN/mk3 = 60 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 4.615 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 108/3.6 = 30 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 30/6.5 = 4.615 s

Answer

t = 4.615 s
2.Kinematics

Answer: t = 3.135 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−20 = 9·t − ½·9.81·t²
4.905·t² − 9·t − 20 = 0

Solve the quadratic

Only the positive root is physical.

t = (9 + √(9² + 2·9.81·20))/9.81 = 3.135 s

Answer

t = 3.135 s
3.Newton’s laws

Answer: a = 2.433 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 20° − 0.1·cos 20°) = 9.81·(0.342 − 0.09397) = 2.433 m/s²

Answer

a = 2.433 m/s²
4.Newton’s laws

Answer: T = 9.418 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (39.24 − 1.962)/5 = 7.456 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 1·7.456 + 1.962 = 9.418 N

Answer

T = 9.418 N
5.Projectile motion

Answer: y = 3.928 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 12·cos 55° = 6.883 m/s
t = x/vx = 10/6.883 = 1.453 s

Height at that time

y = 9.83·1.453 − ½·9.81·1.453² = 3.928 m

Answer

y = 3.928 m

The ball is already on its way down at the wall.

6.Projectile motion

Answer: x = 59.91 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 22·cos 55° = 12.62 m/s
vy = v0·sin θ = 22·sin 55° = 18.02 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 25 + 18.02·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (18.02 + √(324.8 + 490.5))/9.81 = 4.748 s

Horizontal distance

x = vx·t = 12.62·4.748 = 59.91 m

Answer

x = 59.91 m
7.Circular motion

Answer: T = 2.15 s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Radius of the circle

r = L·sin θ = 1.5·sin 40° = 0.9642 m

Speed

Tension and gravity together give the inward force: tan θ = v²/(r·g).

v = √(r·g·tan θ) = √(0.9642·9.81·tan 40°) = 2.817 m/s

Period

T = 2π·r/v = 2π·0.9642/2.817 = 2.15 s

Answer

T = 2.15 s
8.Circular motion

Answer: vmin = 2.62 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·0.7) = 2.62 m/s

Answer

vmin = 2.62 m/s
9.Work & energy

Answer: v = 9.994 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·12·(0.7071 − 0.4·0.7071)) = 9.994 m/s

Answer

v = 9.994 m/s
10.Work & energy

Answer: v = 4.084 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 4.905·(1 − 0.15·1) = 4.169 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·0.85) = 4.084 m/s

Answer

v = 4.084 m/s
11.Momentum & collisions

Answer: ΔK/K = 51.28 %

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1900·7/3900 = 3.41 m/s

Kinetic energy before and after

Kbefore = ½·1900·7² = 46550 J
Kafter = ½·3900·3.41² = 22678 J

Fraction lost

ΔK/K = 23872/46550 = 51.28 %

Answer

ΔK/K = 51.28 %

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: J = 13.2 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.3·(17 + 27) = 13.2 N·s

Answer

J = 13.2 N·s
13.Rigid-body rotation

Answer: Pavg = 0.6031 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·400/60 = 41.89 rad/s

Energy

E = ½·I·ω² = ½·38.5·41.89² = 33776 J

Average power

Pavg = E/t = 33776/56 = 603.1 W = 0.6031 kW

Answer

Pavg = 0.6031 kW
14.Rigid-body rotation

Answer: t = 1.712 s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.5·m·r²·(a/r) → f = 0.5·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 35°/1.5 = 3.751 m/s²

Time

s = ½·a·t² → t = √(2·5.5/3.751) = 1.712 s

Answer

t = 1.712 s
15.Gears & gear trains

Answer: n2 = 495 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1500·150/450 = 500 rpm

With slip

n2 = 500·0.99 = 495 rpm

Answer

n2 = 495 rpm
16.Gears & gear trains

Answer: Tout = 42.03 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 960·(16/32)·(24/48) = 240 rpm
ωout = 2π·240/60 = 25.13 rad/s

Output power and torque

Pout = 1100·0.98² = 1056 W
Tout = Pout/ωout = 1056/25.13 = 42.03 N·m

Answer

Tout = 42.03 N·m
17.Springs & pendulums

Answer: g = 3.715 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for g

g = 4π²·L/T² = 4π²·2/4.61² = 3.715 m/s²

Answer

g = 3.715 m/s²
18.Springs & pendulums

Answer: amax = 2 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(270/2.7) = 10 rad/s

Maximum acceleration

amax = A·ω² = 0.02·10² = 2 m/s²

Answer

amax = 2 m/s²
19.Mechanical vibrations

Answer: ζ = 0.09798

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(15000·25) = 1225 N·s/m

Damping ratio

ζ = c/cc = 120/1225 = 0.09798

Answer

ζ = 0.09798

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 12.43 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 50 + 12 = 62 kN/m
keq = 62·60/(62 + 60) = 30.49 kN/m

Natural frequency

ωn = √(30492/5) = 78.09 rad/s
fn = 78.09/(2π) = 12.43 Hz

Answer

fn = 12.43 Hz

ExamProblems · examproblems.com/courses/dynamics