In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A plane needs a speed of 220 km/h to take off and the usable runway is 2100 m long. Starting from rest, what constant acceleration a does it need?
v₀ = 0v = 220 km/hs = 2100 m
a = m/s²
2.KinematicsHard
A stone is dropped from rest into a well. The splash is heard 3.6 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.
ttotal = 3.6 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
An 8 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 8 kgθ = 45°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 4 kg block on a ramp at 40° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 7 kg mass. The hanging mass moves down. The ramp is frictionless. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 4 kgm2 = 7 kgθ = 40°μ = 0g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is kicked from level ground at 28 m/s and 70° above the horizontal towards a wall 36 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 28 m/sθ = 70°x = 36 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is launched at 60° above horizontal from the top of a 40 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 10 m/sθ = 60°h = 40 mg = 9.81 m/s²
t = s
7.Circular motionMedium
A road engineer wants cars to take a curve of radius 110 m at 90 km/h without relying on friction. Use g = 9.81 m/s². Find the banking angle θ.
r = 110 mv = 90 km/hg = 9.81 m/s²
θ = °
8.Circular motionHard
A 1.9 kg ball on a string 1.5 m long is swung in a vertical circle. At the lowest point it moves at 4 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 1.9 kgr = 1.5 mv = 4 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
A block slides from rest down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.15. Find its speed v after it has slid 14 m along the slope.
θ = 30°μ = 0.15d = 14 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
A 2 kg block starts from rest at the bottom of a 35° slope and is pulled up the slope by a constant force of 25 N parallel to the slope. The coefficient of kinetic friction is 0.2. Find the speed v of the block after it has moved 10 m up the slope.
A 5 g bullet is fired horizontally into a 3.5 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 4 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 5 gM = 3.5 kgh = 4 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
At a crossing a 1800 kg car travelling east at 21 m/s collides with a 1400 kg car travelling north at 24 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.
m1 = 1800 kgv1 = 21 m/s (E)m2 = 1400 kgv2 = 24 m/s (N)
v′ = m/s
13.Rigid-body rotationMedium
A uniform slender rod of mass 20 kg and length 2.6 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find its angular acceleration α just after release.
m = 20 kgL = 2.6 mg = 9.81 m/s²
α = rad/s²
14.Rigid-body rotationHard
A hollow sphere rolls without slipping down a slope inclined at 15° to the horizontal. Use g = 9.81 m/s². It starts from rest. How long t does it take to roll 7.5 m down the slope?
θ = 15°I = (2/3)·m·r²g = 9.81 m/s²s = 7.5 m
t = s
15.Gears & gear trainsMedium
A 5.5 kW motor running at 2900 rpm drives a pinion with 16 teeth and a module of 4 mm. Find the tangential force Ft on the pinion teeth.
P = 5.5 kWn = 2900 rpmN1 = 16m = 4 mm
Ft = N
16.Gears & gear trainsHard
An open belt connects a 150 mm pulley and a 450 mm pulley whose centres are 500 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.
d1 = 150 mmd2 = 450 mmC = 500 mm
θ = °
17.Springs & pendulumsMedium
A 4 kg mass on a spring with k = 210 N/m oscillates on a frictionless surface with an amplitude of 15 cm. Find its speed v when it is 14 cm from equilibrium.
m = 4 kgk = 210 N/mA = 15 cmx = 14 cm
v = m/s
18.Springs & pendulumsHard
A 2.8 kg mass on a spring with k = 460 N/m is pulled 11 cm from equilibrium and released. Find its maximum speed vmax.
m = 2.8 kgk = 460 N/mA = 11 cm
vmax = m/s
19.Mechanical vibrationsMedium
A 100 kg mass on a spring with a stiffness of 12 kN/m has a viscous damper giving a damping ratio of 0.5. Find the damped natural frequency fd of its free vibration in Hz.
m = 100 kgk = 12 kN/mζ = 0.5
fd = Hz
20.Mechanical vibrationsHard
A 50 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 40 kN/m and the lower one k₂ = 20 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 50 kgk1 = 40 kN/mk2 = 20 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: a = 0.8892 m/s²
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v = 220/3.6 = 61.11 m/s
Acceleration
a = v²/(2s) = 61.11²/(2·2100) = 0.8892 m/s²
Answer
a = 0.8892 m/s²
2.Kinematics
Answer: d = 57.76 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Two parts of the time
½·9.81·t₁² = 343·(3.6 − t₁)
4.905·t₁² + 343·t₁ − 1235 = 0
Fall time
Only the positive root is physical.
t₁ = (−343 + √(343² + 4·4.905·1235))/(2·4.905) = 3.432 s
Depth
d = ½·9.81·3.432² = 57.76 m
Answer
d = 57.76 m
3.Newton’s laws
Answer: a = 5.203 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the string
m₂·g = 68.67 N
m₁·g·sin θ = 25.22 N
μ·m₁·g·cos θ = 0 N
Acceleration of the system
a = (68.67 − 25.22 − 0)/11 = 3.95 m/s²
Answer
a = 3.95 m/s²
5.Projectile motion
Answer: y = 29.59 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 28·cos 70° = 9.577 m/s
t = x/vx = 36/9.577 = 3.759 s
Height at that time
y = 26.31·3.759 − ½·9.81·3.759² = 29.59 m
Answer
y = 29.59 m
The ball is already on its way down at the wall.
6.Projectile motion
Answer: t = 3.872 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 10·cos 60° = 5 m/s
vy = v0·sin θ = 10·sin 60° = 8.66 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 40 + 8.66·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (8.66 + √(75 + 784.8))/9.81 = 3.872 s
Answer
t = 3.872 s
7.Circular motion
Answer: θ = 30.08 °
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Units
v = 90/3.6 = 25 m/s
Banking angle
tan θ = v²/(r·g) = 25²/(110·9.81) = 0.5792
θ = 30.08°
Answer
θ = 30.08°
8.Circular motion
Answer: T = 38.91 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 1.9·9.81 + 1.9·4²/1.5 = 18.64 + 20.27 = 38.91 N
Answer
T = 38.91 N
9.Work & energy
Answer: v = 10.08 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·14·(0.5 − 0.15·0.866)) = 10.08 m/s
Answer
v = 10.08 m/s
10.Work & energy
Answer: v = 10.26 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Forces along the slope
m·g = 2·9.81 = 19.62 N
mg·sin θ = 11.25 N
μ·mg·cos θ = 3.214 N
Work–energy
½mv² = (25 − 14.47)·10 = 105.3 J
v = √(2·105.3/2) = 10.26 m/s
Answer
v = 10.26 m/s
11.Momentum & collisions
Answer: v = 621 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Swing after impact
V = √(2·g·h) = √(2·9.81·0.04) = 0.8859 m/s
Collision
m·v = (m + M)·V → v = (0.005 + 3.5)·0.8859/0.005 = 621 m/s
Answer
v = 621 m/s
12.Momentum & collisions
Answer: v′ = 15.8 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Moments about the pin
At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Equations of motion
m·g·sin θ − f = m·a
f·r = I·α = 0.6667·m·r²·(a/r) → f = 0.6667·m·a
Acceleration
a = g·sin θ/(1 + c) = 9.81·sin 15°/1.667 = 1.523 m/s²
Time
s = ½·a·t² → t = √(2·7.5/1.523) = 3.138 s
Answer
t = 3.138 s
15.Gears & gear trains
Answer: Ft = 566 N
Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.
Torque on the pinion
ω = 2π·2900/60 = 303.7 rad/s
T = P/ω = 5500/303.7 = 18.11 N·m
Pitch diameter
d = m·N = 4·16 = 64 mm
Tangential force
Ft = 2T/d = 2·18.11/0.064 = 566 N
Answer
Ft = 566 N
16.Gears & gear trains
Answer: θ = 145.1 °
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt angle
asin(0.3) = 17.46°
Angle of wrap
θ = 180 − 2·17.46 = 145.1°
Answer
θ = 145.1°
17.Springs & pendulums
Answer: v = 0.3902 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(210/4) = 7.246 rad/s
Speed at x
v = ω·√(A² − x²) = 7.246·√(0.15² − 0.14²) = 0.3902 m/s
Answer
v = 0.3902 m/s
18.Springs & pendulums
Answer: vmax = 1.41 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(460/2.8) = 12.82 rad/s
Maximum speed
vmax = A·ω = 0.11·12.82 = 1.41 m/s
Answer
vmax = 1.41 m/s
19.Mechanical vibrations
Answer: fd = 1.51 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(12000/100) = 10.95 rad/s
fn = 10.95/(2π) = 1.743 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 1.743·√(1 − 0.5²) = 1.51 Hz
Answer
fd = 1.51 Hz
20.Mechanical vibrations
Answer: fn = 2.599 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.