Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = ?s = 2300 m

A plane needs a speed of 180 km/h to take off and the usable runway is 2300 m long. Starting from rest, what constant acceleration a does it need?

v₀ = 0v = 180 km/hs = 2300 m
a = m/s²
2.KinematicsHard
v₀ = 7 m/s5 m

A ball is thrown straight up at 7 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 7 m/sh₀ = 5 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 35°a = ?m = 16 kg

A 16 kg block slides down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 16 kgθ = 35°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 4 kg3.5 kgμ = 0.2

A 4 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3.5 kg mass. The coefficient of kinetic friction between block and table is 0.2. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 4 kgm2 = 3.5 kgμ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 34 m/s35°rangeH = ?

A ball is launched at 35° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 34 m/sθ = 35°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 25 mv0​ = 28 m/s45°range

A ball is launched at 45° above horizontal from the top of a 25 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 28 m/sθ = 45°h = 25 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 65 mvmax​ = ?

A car takes a flat curve of radius 65 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 65 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
θ = 30°to centrevmin​ = ?

A curve of radius 220 m is banked at 30°, and the coefficient of static friction between tyres and road is 0.2. Use g = 9.81 m/s². Find the lowest speed vmin at which a car can take the curve without sliding down the bank.

r = 220 mθ = 30°μs = 0.2g = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
35°d = 10 mμ = 0.3

A 4 kg block slides 10 m down a slope at 35° to the horizontal, with a coefficient of kinetic friction of 0.3. Find the work Wf done against friction.

m = 4 kgθ = 35°μ = 0.3d = 10 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
5 kg1 kgμ = 0.1d = 2.5 m

A 5 kg block rests on a rough horizontal table (μ = 0.1). A light string runs from it over a smooth pulley at the edge of the table to a hanging 1 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 2.5 m.

m1 = 5 kgm2 = 1 kgμ = 0.1d = 2.5 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
3 kgv = ?12 gh = 22 cm

A 12 g bullet is fired horizontally into a 3 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 22 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 12 gM = 3 kgh = 22 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
1900 kgv1​ = ?1000 kg

A 1900 kg car runs into a parked 1000 kg car. The wrecks lock together and skid 4 m before stopping. The coefficient of kinetic friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 1900 kgm2 = 1000 kgd = 4 mμ = 0.7g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
L = 1.5 mm = 9 kgα

A uniform slender rod of mass 9 kg and length 1.5 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 9 kgL = 1.5 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
4 m/sω

A hollow sphere of mass 14 kg rolls without slipping at 4 m/s. What percentage p of its total kinetic energy is rotational?

m = 14 kgv = 4 m/sI = (2/3)·m·r²
p = %
15.Gears & gear trainsMedium
d1​ = 200 mmd2​ = 250 mm2880 rpmn2​ = ?

A 200 mm pulley at 2880 rpm drives a 250 mm pulley by a belt with 4 % slip. Find the speed n2 of the driven pulley.

n1 = 2880 rpmd1 = 200 mmd2 = 250 mms = 4 %
n2 = rpm
16.Gears & gear trainsHard
Ns​ = 12nr​ = ?Np​ = 20carrier fixed

In a planetary gear set the sun gear has 12 teeth and each planet gear has 20 teeth. The planet carrier is held fixed and the sun is driven at 3000 rpm. Find the speed nr of the ring gear (magnitude).

Ns = 12Np = 20ns = 3000 rpm
nr = rpm
17.Springs & pendulumsMedium
1.7 kgk = 490 N/mA = 7 cmx = 6 cm

A 1.7 kg mass on a spring with k = 490 N/m oscillates on a frictionless surface with an amplitude of 7 cm. Find its speed v when it is 6 cm from equilibrium.

m = 1.7 kgk = 490 N/mA = 7 cmx = 6 cm
v = m/s
18.Springs & pendulumsHard
mk = 300 N/mA = 13 cmx = 2 cm

A mass on a spring with k = 300 N/m oscillates on a frictionless surface with an amplitude of 13 cm. Find its kinetic energy K when it is 2 cm from equilibrium.

k = 300 N/mA = 13 cmx = 2 cm
K = J
19.Mechanical vibrationsMedium
tx15 mm1 cycle11.7 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 15 mm is followed one cycle later by a peak of 11.7 mm. Find the damping ratio ζ.

x0 = 15 mmx1 = 11.7 mmn = 1
ζ =
20.Mechanical vibrationsHard
k1​ = 80k2​ = 80k3​ = 80m = 5 kg

A 5 kg mass hangs from spring k₃ = 80 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 80 kN/m and k₂ = 80 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 80 kN/mk2 = 80 kN/mk3 = 80 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: a = 0.5435 m/s²

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v = 180/3.6 = 50 m/s

Acceleration

a = v²/(2s) = 50²/(2·2300) = 0.5435 m/s²

Answer

a = 0.5435 m/s²
2.Kinematics

Answer: t = 1.95 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−5 = 7·t − ½·9.81·t²
4.905·t² − 7·t − 5 = 0

Solve the quadratic

Only the positive root is physical.

t = (7 + √(7² + 2·9.81·5))/9.81 = 1.95 s

Answer

t = 1.95 s
3.Newton’s laws

Answer: a = 3.216 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 35° − 0.3·cos 35°) = 9.81·(0.5736 − 0.2457) = 3.216 m/s²

Answer

a = 3.216 m/s²
4.Newton’s laws

Answer: T = 21.97 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (34.34 − 7.848)/7.5 = 3.532 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 4·3.532 + 7.848 = 21.97 N

Answer

T = 21.97 N
5.Projectile motion

Answer: H = 19.38 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 34·cos 35° = 27.85 m/s
vy = v0·sin θ = 34·sin 35° = 19.5 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 19.5²/(2·9.81) = 19.38 m

Answer

H = 19.38 m
6.Projectile motion

Answer: t = 5.046 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 28·cos 45° = 19.8 m/s
vy = v0·sin θ = 28·sin 45° = 19.8 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 25 + 19.8·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (19.8 + √(392 + 490.5))/9.81 = 5.046 s

Answer

t = 5.046 s
7.Circular motion

Answer: vmax = 21.13 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·65) = 21.13 m/s

Answer

vmax = 21.13 m/s (76.06 km/h)
8.Circular motion

Answer: vmin = 27.02 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points up the slope.

N·(sin θ − μ·cos θ) = m·v²/r
N·(cos θ + μ·sin θ) = m·g

Speed

v = √(220·9.81·0.3268/0.966) = 27.02 m/s

Answer

vmin = 27.02 m/s
(97.27 km/h)
9.Work & energy

Answer: Wf = 96.43 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 39.24·0.8192 = 32.14 N
F = μN = 0.3·32.14 = 9.643 N

Work against friction

Wf = F·d = 9.643·10 = 96.43 J

Answer

Wf = 96.43 J
10.Work & energy

Answer: v = 2.022 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 9.81·2.5 = 24.53 J
μ·m₁g·d = 0.1·49.05·2.5 = 12.26 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 12.26 → v = √(2·12.26/6) = 2.022 m/s

Answer

v = 2.022 m/s
11.Momentum & collisions

Answer: v = 521.5 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.22) = 2.078 m/s

Collision

m·v = (m + M)·V → v = (0.012 + 3)·2.078/0.012 = 521.5 m/s

Answer

v = 521.5 m/s
12.Momentum & collisions

Answer: v1 = 11.31 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.7·9.81·4) = 7.412 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 2900·7.412/1900 = 11.31 m/s

Answer

v1 = 11.31 m/s
(40.73 km/h)
13.Rigid-body rotation

Answer: R = 22.07 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·1.5) = 9.81 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 9·(9.81 − 7.357) = 22.07 N

Answer

R = 22.07 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: p = 40 %

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·14·4² = 112 J
Erot = ½·I·ω² = ½·0.6667·m·r²·(v/r)² = 0.6667·112 = 74.67 J

Rotational share

p = 74.67/186.7·100% = c/(1 + c)·100% = 40%

Answer

p = 40 %

The share depends only on the shape, not on the mass or the speed.

15.Gears & gear trains

Answer: n2 = 2212 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

2880·200/250 = 2304 rpm

With slip

n2 = 2304·0.96 = 2212 rpm

Answer

n2 = 2212 rpm
16.Gears & gear trains

Answer: nr = 692.3 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 12 + 2·20 = 52

Willis equation with the carrier fixed

With nc = 0 the sun drives the ring through the planets, which act as idlers.

nr = −ns·Ns/Nr = −3000·12/52 = −692.3 rpm
|nr| = 692.3 rpm

Answer

nr = 692.3 rpm

The ring turns opposite to the sun.

17.Springs & pendulums

Answer: v = 0.6121 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(490/1.7) = 16.98 rad/s

Speed at x

v = ω·√(A² − x²) = 16.98·√(0.07² − 0.06²) = 0.6121 m/s

Answer

v = 0.6121 m/s
18.Springs & pendulums

Answer: K = 2.475 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Total energy

E = ½·k·A² = ½·300·0.13² = 2.535 J

Spring energy at x

U = ½·k·x² = ½·300·0.02² = 0.06 J

Kinetic energy

K = 2.535 − 0.06 = 2.475 J

Answer

K = 2.475 J
19.Mechanical vibrations

Answer: ζ = 0.03951

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/1)·ln(15/11.7) = 0.2485

Damping ratio

ζ = δ/√(4π² + δ²) = 0.2485/√(39.48 + 0.06173) = 0.03951

Answer

ζ = 0.03951
20.Mechanical vibrations

Answer: fn = 16.44 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 80 + 80 = 160 kN/m
keq = 160·80/(160 + 80) = 53.33 kN/m

Natural frequency

ωn = √(53333/5) = 103.3 rad/s
fn = 103.3/(2π) = 16.44 Hz

Answer

fn = 16.44 Hz

ExamProblems · examproblems.com/courses/dynamics