In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car speeding at a constant 18 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 6 m/s². How long does it take the police car to catch up? Find t.
vcar = 18 m/sapolice = 6 m/s²v0,police = 0
t = s
2.KinematicsHard
A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 38 m/s² for 2 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.
a = 38 m/s²t1 = 2 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 5 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 5 kgθ = 25°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 4 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 2 kg mass. The coefficient of kinetic friction between block and table is 0.25. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 4 kgm2 = 2 kgμ = 0.25g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is kicked from level ground at 38 m/s and 40° above the horizontal towards a wall 116 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 38 m/sθ = 40°x = 116 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is launched at 25 m/s and 40° above the horizontal from the top of a 45 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.
v₀ = 25 m/sθ = 40°h = 45 mg = 9.81 m/s²
H = m
7.Circular motionMedium
In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 2.9 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.4. Use g = 9.81 m/s². Find the smallest angular speed ω in rad/s.
r = 2.9 mμs = 0.4g = 9.81 m/s²
ω = rad/s
8.Circular motionHard
A 1.3 kg ball on a string 0.6 m long is swung in a vertical circle. At the lowest point it moves at 5.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 1.3 kgr = 0.6 mv = 5.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
A car travelling at 30 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.7. Find the stopping distance d.
v = 30 km/hμ = 0.7g = 9.81 m/s²
d = m
10.Work & energyHard
A 2.5 kg block is released from rest at height 2.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4 m long (μ = 0.15) and then runs onto a spring (k = 5000 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 2.5 kgh = 2.5 mL = 4 mμ = 0.15k = 5000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
A 15 kg projectile moving horizontally at 20 m/s explodes into two fragments that move along the same line. The 8 kg fragment continues forwards at 53 m/s. Find the velocity v′2 of the 7 kg fragment (positive in the original direction).
M = 15 kgu = 20 m/sm1 = 8 kgv′1 = 53 m/sm2 = 7 kg
v′2 = m/s
12.Momentum & collisionsHard
A 0.15 kg ball hits a wall at 15 m/s and bounces straight back at 20 m/s. The contact lasts 20 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.15 kgvin = 15 m/svout = 20 m/sΔt = 20 ms
J = N·s
13.Rigid-body rotationMedium
A uniform slender rod of mass 3.5 kg and length 2.6 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.
m = 3.5 kgL = 2.6 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
A person stands on a frictionless turntable and holds a 2 kg dumbbell in each hand, 0.9 m from the axis. The person and turntable alone have a moment of inertia of 4.5 kg·m² about the axis. They turn at 50 rpm, then pull the dumbbells in to 0.25 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.
A belt runs on a 125 mm driving pulley at 2880 rpm. The tension is 1200 N on the tight side and 240 N on the slack side. Find the power P transmitted, in kW.
d1 = 125 mmn1 = 2880 rpmT1 = 1200 NT2 = 240 N
P = kW
16.Gears & gear trainsHard
In a compound gear train, gear A (40 teeth) on the input shaft turning at 2900 rpm drives gear B (60 teeth). Gear C (12 teeth) is fixed to the same shaft as B and drives gear D (32 teeth) on the output shaft. Find the output speed nout.
nin = 2900 rpmA = 40B = 60C = 12D = 32
nout = rpm
17.Springs & pendulumsMedium
A simple pendulum has a length of 2.2 m. Use g = 9.81 m/s². Find its period T for small swings.
L = 2.2 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
A 0.7 kg mass on a spring with k = 60 N/m is pulled 13 cm from equilibrium and released. Find its maximum speed vmax.
m = 0.7 kgk = 60 N/mA = 13 cm
vmax = m/s
19.Mechanical vibrationsMedium
A 12 kg mass on a spring with a stiffness of 80 kN/m has a viscous damper giving a damping ratio of 0.6. Find the damped natural frequency fd of its free vibration in Hz.
m = 12 kgk = 80 kN/mζ = 0.6
fd = Hz
20.Mechanical vibrationsHard
A 5 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 5 kN/m and k₂ = 10 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.
m = 5 kgk1 = 5 kN/mk2 = 10 kN/m
keq = kN/m
3Solutions
1.Kinematics
Answer: t = 6 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·18/6 = 6 s
Answer
t = 6 s
At that moment the police car moves at 2v = 36 m/s.
2.Kinematics
Answer: hmax = 370.4 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Powered phase
v₁ = 38·2 = 76 m/s
h₁ = ½·38·2² = 76 m
Free flight up
At the top the velocity is zero.
Δh = v₁²/(2g) = 76²/(2·9.81) = 294.4 m
hmax = 76 + 294.4 = 370.4 m
Answer
hmax = 370.4 m
3.Newton’s laws
Answer: a = 1.923 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 38·cos 40° = 29.11 m/s
t = x/vx = 116/29.11 = 3.985 s
Height at that time
y = 24.43·3.985 − ½·9.81·3.985² = 19.45 m
Answer
y = 19.45 m
The ball is already on its way down at the wall.
6.Projectile motion
Answer: H = 58.16 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Vertical launch speed
vy = 25·sin 40° = 16.07 m/s
Rise above the cliff
Δh = vy²/(2g) = 16.07²/(2·9.81) = 13.16 m
Height above the ground
H = 45 + 13.16 = 58.16 m
Answer
H = 58.16 m
7.Circular motion
Answer: ω = 2.908 rad/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces on a rider
N = m·ω²·r
μ·N = m·g → μ·ω²·r = g
Angular speed
ω = √(g/(μ·r)) = √(9.81/(0.4·2.9)) = 2.908 rad/s
Answer
ω = 2.908 rad/s
8.Circular motion
Answer: T = 78.29 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 1.3·9.81 + 1.3·5.5²/0.6 = 12.75 + 65.54 = 78.29 N
Answer
T = 78.29 N
9.Work & energy
Answer: d = 5.056 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Speed in base units
v = 30/3.6 = 8.333 m/s
Energy balance
½mv² = μmg·d → d = v²/(2μg) = 8.333²/(2·0.7·9.81) = 5.056 m
Answer
d = 5.056 m
Doubling the speed makes the stopping distance four times longer.
10.Work & energy
Answer: x = 13.65 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 24.53·(2.5 − 0.15·4) = 46.6 J
Maximum compression
½kx² = 46.6 → x = √(2·46.6/5000) = 0.1365 m = 13.65 cm
Answer
x = 13.65 cm
11.Momentum & collisions
Answer: v′2 = −17.71 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum before
p = M·u = 15·20 = 300 kg·m/s
Momentum after
300 = 8·53 + 7·v′2
v′2 = (300 − 424)/7 = −17.71 m/s
Answer
v′2 = −17.71 m/s
The minus sign means the second fragment flies backwards.
12.Momentum & collisions
Answer: J = 5.25 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.15·(20 + 15) = 5.25 N·s
Answer
J = 5.25 N·s
13.Rigid-body rotation
Answer: R = 8.584 N
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Moments about the pin
At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Moments of inertia
I1 = 4.5 + 2·2·0.9² = 7.74 kg·m²
I2 = 4.5 + 2·2·0.25² = 4.75 kg·m²
Conservation of angular momentum
n2 = n1·I1/I2 = 50·7.74/4.75 = 81.47 rpm
Answer
n2 = 81.47 rpm
The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.
15.Gears & gear trains
Answer: P = 18.1 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt speed
v = 18.85 m/s
Power
P = (1200 − 240)·18.85 = 18096 W = 18.1 kW
Answer
P = 18.1 kW
16.Gears & gear trains
Answer: nout = 725 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
First stage
nB = 2900·40/60 = 1933 rpm = nC
Second stage
nout = 1933·12/32 = 725 rpm
Answer
nout = 725 rpm
total ratio = 4 : 1
17.Springs & pendulums
Answer: T = 2.975 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Pendulum period
T = 2π·√(2.2/9.81) = 2.975 s
Answer
T = 2.975 s
18.Springs & pendulums
Answer: vmax = 1.204 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(60/0.7) = 9.258 rad/s
Maximum speed
vmax = A·ω = 0.13·9.258 = 1.204 m/s
Answer
vmax = 1.204 m/s
19.Mechanical vibrations
Answer: fd = 10.4 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(80000/12) = 81.65 rad/s
fn = 81.65/(2π) = 12.99 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 12.99·√(1 − 0.6²) = 10.4 Hz
Answer
fd = 10.4 Hz
20.Mechanical vibrations
Answer: keq = 15 kN/m
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.