Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)0.5 s13.89

A driver moving at 50 km/h sees an obstacle. Her reaction time is 0.5 s, after which the car brakes with a constant deceleration of 7 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 50 km/htr = 0.5 sa = −7 m/s²
d = m
2.KinematicsHard
v₀ = 7 m/s40 m

A ball is thrown straight up at 7 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 7 m/sh₀ = 40 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
25 kg35°F = 80 Nμ = 0.1

A 25 kg sled is pulled across level snow by a rope at 35° above the horizontal with a force of 80 N. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the sled.

m = 25 kgF = 80 Nθ = 35°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
4 kg7 kgTF = 35 Nμ = 0.15

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 35 N pulls the front 7 kg block; the 4 kg block is towed behind. The coefficient of kinetic friction is 0.15 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 4 kgm2 = 7 kgF = 35 Nμ = 0.15g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 38 m/s35°range

A ball is launched at 35° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 38 m/sθ = 35°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 15 mv0​ = 32 m/s50°H = ?

A ball is launched at 32 m/s and 50° above the horizontal from the top of a 15 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 32 m/sθ = 50°h = 15 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 45 mvmax​ = ?

A car takes a flat curve of radius 45 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 45 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.9 mv = 5.5 m/s

A 0.5 kg ball on a string 0.9 m long is swung in a vertical circle. At the lowest point it moves at 5.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 0.5 kgr = 0.9 mv = 5.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
50°L = 3 m2 kg

A 2 kg ball hangs on a light string of length 3 m. It is pulled aside until the string makes 50° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.

m = 2 kgL = 3 mθ = 50°g = 9.81 m/s²
T = N
10.Work & energyHard
h = 4 mL = 1.5 mμ = 0.2k = 4000 N/m

A 10 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.2) and then runs onto a spring (k = 4000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 10 kgh = 4 mL = 1.5 mμ = 0.2k = 4000 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
2.5 kg11 m/s5 kg

A 2.5 kg glider moving at 11 m/s makes a perfectly elastic head-on collision with a 5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 2.5 kgm2 = 5 kgv1 = 11 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
24 m/s5 m/s

A 0.35 kg ball hits a wall at 24 m/s and bounces straight back at 5 m/s. The contact lasts 25 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.35 kgvin = 24 m/svout = 5 m/sΔt = 25 ms
J = N·s
13.Rigid-body rotationMedium
v = ?L = 0.6 mm = 1.5 kg

A uniform slender rod of mass 1.5 kg and length 0.6 m is pinned at one end and released from rest in a horizontal position. Ignore friction and use g = 9.81 m/s². Find the speed v of the free end as the rod swings through the vertical position.

m = 1.5 kgL = 0.6 mg = 9.81 m/s²
v = m/s
14.Rigid-body rotationHard
θ = 20°a

A thin hoop rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². Find the smallest coefficient of static friction μs that prevents it from slipping.

θ = 20°I = m·r²g = 9.81 m/s²
μs =
15.Gears & gear trainsMedium
N1​ = 18, m = 4 mm

A 15 kW motor running at 960 rpm drives a pinion with 18 teeth and a module of 4 mm. Find the tangential force Ft on the pinion teeth.

P = 15 kWn = 960 rpmN1 = 18m = 4 mm
Ft = N
16.Gears & gear trainsHard
d1​ = 120 mmd2​ = 450 mm1450 rpmC = 1000 mmT1​ = 500 NT2​P = ?

An open belt connects a 120 mm driving pulley at 1450 rpm to a 450 mm pulley; the centres are 1000 mm apart. The coefficient of friction is 0.3 and the tight-side tension may not exceed 500 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 120 mmn1 = 1450 rpmd2 = 450 mmC = 1000 mmμ = 0.3T1 = 500 N
P = kW
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 1.4 s? Use g = 9.81 m/s². Find L.

T = 1.4 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
t (s)x (cm)t = ?3

A body oscillates in simple harmonic motion with period 3.4 s and amplitude 12 cm. What is the shortest time t it needs to move from equilibrium to a displacement of 3 cm?

T = 3.4 sA = 12 cmx = 3 cm
t = s
19.Mechanical vibrationsMedium
tx50 mm5 cycles4 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 50 mm is followed 5 cycles later by a peak of 4 mm. Find the damping ratio ζ.

x0 = 50 mmx5 = 4 mmn = 5
ζ =
20.Mechanical vibrationsHard
k1​ = 100k2​ = 30m = 50 kg

A 50 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 100 kN/m and the lower one k₂ = 30 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 50 kgk1 = 100 kN/mk2 = 30 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: d = 20.72 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 50/3.6 = 13.89 m/s

Reaction distance

d1 = v₀·tr = 13.89·0.5 = 6.944 m

Braking distance

d2 = v₀²/(2a) = 13.89²/(2·7) = 13.78 m

Total

d = 6.944 + 13.78 = 20.72 m

Answer

d = 20.72 m
2.Kinematics

Answer: t = 3.657 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−40 = 7·t − ½·9.81·t²
4.905·t² − 7·t − 40 = 0

Solve the quadratic

Only the positive root is physical.

t = (7 + √(7² + 2·9.81·40))/9.81 = 3.657 s

Answer

t = 3.657 s
3.Newton’s laws

Answer: a = 1.824 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Normal force

N = m·g − F·sin θ = 245.3 − 80·sin 35° = 199.4 N

Horizontal forces

m·a = F·cos θ − μ·N = 65.53 − 19.94
a = 45.6/25 = 1.824 m/s²

Answer

a = 1.824 m/s²
4.Newton’s laws

Answer: T = 12.73 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (35 − 16.19)/11 = 1.71 m/s²

Rear block alone

T = m1·(a + μ·g) = 4·(1.71 + 1.472) = 12.73 N

Answer

T = 12.73 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: t = 4.444 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 38·cos 35° = 31.13 m/s
vy = v0·sin θ = 38·sin 35° = 21.8 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·21.8/9.81 = 4.444 s

Answer

t = 4.444 s
6.Projectile motion

Answer: H = 45.63 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 32·sin 50° = 24.51 m/s

Rise above the cliff

Δh = vy²/(2g) = 24.51²/(2·9.81) = 30.63 m

Height above the ground

H = 15 + 30.63 = 45.63 m

Answer

H = 45.63 m
7.Circular motion

Answer: vmax = 17.58 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·45) = 17.58 m/s

Answer

vmax = 17.58 m/s (63.28 km/h)
8.Circular motion

Answer: T = 21.71 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 0.5·9.81 + 0.5·5.5²/0.9 = 4.905 + 16.81 = 21.71 N

Answer

T = 21.71 N
9.Work & energy

Answer: T = 33.64 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the bottom

v² = 2gL(1 − cos θ) = 2·9.81·3·(1 − cos 50°) = 21.03 m²/s²

Forces at the bottom

m·g = 2·9.81 = 19.62 N
T = mg + mv²/L = 19.62 + 2·21.03/3 = 33.64 N

Answer

T = 33.64 N

Check: T = mg(3 − 2cos θ) = 33.64 N.

10.Work & energy

Answer: v = 8.52 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 98.1·(4 − 0.2·1.5) = 363 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·3.7) = 8.52 m/s

Answer

v = 8.52 m/s
11.Momentum & collisions

Answer: v′1 = −3.667 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (2.5 − 5)/(2.5 + 5)·11 = −3.667 m/s
v′2 = 2·2.5/(2.5 + 5)·11 = 7.333 m/s

Answer

v′1 = −3.667 m/s

The minus sign means the first glider bounces back.

12.Momentum & collisions

Answer: J = 10.15 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.35·(5 + 24) = 10.15 N·s

Answer

J = 10.15 N·s
13.Rigid-body rotation

Answer: v = 4.202 m/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 = 1.5·9.81·0.3 = 4.414 J

Moment of inertia about the pin

IO = m·L²/3 = 1.5·0.6²/3 = 0.18 kg·m²

Energy balance

½·IO·ω² = 4.414 → ω = √(2·4.414/0.18) = 7.004 rad/s
v = ω·L = 7.004·0.6 = 4.202 m/s

Answer

v = 4.202 m/s
14.Rigid-body rotation

Answer: μs = 0.182

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 1·m·r²·(a/r) → f = 1·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 20°/2 = 1.678 m/s²

Friction needed

f = c·m·a ≤ μ·m·g·cos θ → μ ≥ c·tan θ/(1 + c)
μs = 1·tan 20°/2 = 0.182

Answer

μs = 0.182
15.Gears & gear trains

Answer: Ft = 4145 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·960/60 = 100.5 rad/s
T = P/ω = 15000/100.5 = 149.2 N·m

Pitch diameter

d = m·N = 4·18 = 72 mm

Tangential force

Ft = 2T/d = 2·149.2/0.072 = 4145 N

Answer

Ft = 4145 N
16.Gears & gear trains

Answer: P = 2.595 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.81 rad

Slack-side tension

eμθ = e0.843 = 2.323, T₂ = 500/2.323 = 215.2 N

Power

P = (500 − 215.2)·9.111 = 2.595 kW

Answer

P = 2.595 kW
17.Springs & pendulums

Answer: L = 0.487 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(1.4/2π)² = 0.487 m

Answer

L = 0.487 m
18.Springs & pendulums

Answer: t = 0.1367 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = 2π/T = 2π/3.4 = 1.848 rad/s

Solve for the time

0.25 = sin(ω·t) → ω·t = arcsin(0.25) = 0.2527 rad
t = 0.2527/1.848 = 0.1367 s

Answer

t = 0.1367 s
19.Mechanical vibrations

Answer: ζ = 0.08014

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/5)·ln(50/4) = 0.5051

Damping ratio

ζ = δ/√(4π² + δ²) = 0.5051/√(39.48 + 0.2552) = 0.08014

Answer

ζ = 0.08014
20.Mechanical vibrations

Answer: keq = 23.08 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/100 + 1/30 → keq = 100·30/(100 + 30) = 23.08 kN/m

Answer

keq = 23.08 kN/m

ExamProblems · examproblems.com/courses/dynamics