Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)6.173 s27.78

A car driving at 100 km/h brakes with a constant deceleration of 4.5 m/s² until it stops. Find the braking distance s.

v₀ = 100 km/ha = −4.5 m/s²v = 0
s = m
2.KinematicsHard
d = ?

A stone is dropped from rest into a well. The splash is heard 4.3 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.

ttotal = 4.3 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
θ = 30°a = ?m = 15 kg

A 15 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 15 kgθ = 30°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 7 kg3 kgμ = 0.3

A 7 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 7 kgm2 = 3 kgμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 22 m/s35°rangeH = ?

A ball is launched at 35° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 22 m/sθ = 35°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 35 mv0​ = 32 m/s20°range

A ball is launched at 20° above horizontal from the top of a 35 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 32 m/sθ = 20°h = 35 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 20 mvmax​ = ?

A car takes a flat curve of radius 20 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 20 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.7 mv = 9 m/s

A 1 kg ball on a string 0.7 m long is swung in a vertical circle. At the lowest point it moves at 9 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1 kgr = 0.7 mv = 9 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
40°d = 19 mμ = 0.25

A block slides from rest down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.25. Find its speed v after it has slid 19 m along the slope.

θ = 40°μ = 0.25d = 19 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
F = 20 N25°μ = 0.12 kg

A 2 kg block starts from rest at the bottom of a 25° slope and is pulled up the slope by a constant force of 20 N parallel to the slope. The coefficient of kinetic friction is 0.1. Find the speed v of the block after it has moved 4 m up the slope.

m = 2 kgF = 20 Nθ = 25°μ = 0.1d = 4 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
4.5 kgv = ?15 gh = 9 cm

A 15 g bullet is fired horizontally into a 4.5 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 9 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 15 gM = 4.5 kgh = 9 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
1900 kg10 m/s1300 kg25 m/sv′ = ?

At a crossing a 1900 kg car travelling east at 10 m/s collides with a 1300 kg car travelling north at 25 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.

m1 = 1900 kgv1 = 10 m/s (E)m2 = 1300 kgv2 = 25 m/s (N)
v′ = m/s
13.Rigid-body rotationMedium
v = ?L = 2.2 mm = 6 kg

A uniform slender rod of mass 6 kg and length 2.2 m is pinned at one end and released from rest in a horizontal position. Ignore friction and use g = 9.81 m/s². Find the speed v of the free end as the rod swings through the vertical position.

m = 6 kgL = 2.2 mg = 9.81 m/s²
v = m/s
14.Rigid-body rotationHard
0.7 m0.25 mn1​ = 50 rpm

A person stands on a frictionless turntable and holds a 3.5 kg dumbbell in each hand, 0.7 m from the axis. The person and turntable alone have a moment of inertia of 4 kg·m² about the axis. They turn at 50 rpm, then pull the dumbbells in to 0.25 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.

I0 = 4 kg·m²m = 2 × 3.5 kgr1 = 0.7 mr2 = 0.25 mn1 = 50 rpm
n2 = rpm
15.Gears & gear trainsMedium
N1​ = 50N2​ = 72

An 11 kW motor running at 1500 rpm drives a pinion with 50 teeth, which meshes with a gear with 72 teeth. The gear pair has an efficiency of 98%. Find the torque T1 on the motor shaft.

P = 11 kWn1 = 1500 rpmN1 = 50N2 = 72η = 98%
T1 = N·m
16.Gears & gear trainsHard
A = 25B = 60C = 25D = 48

In a compound gear train, gear A (25 teeth) on the input shaft turning at 960 rpm drives gear B (60 teeth). Gear C (25 teeth) is fixed to the same shaft as B and drives gear D (48 teeth) on the output shaft. Find the output speed nout.

nin = 960 rpmA = 25B = 60C = 25D = 48
nout = rpm
17.Springs & pendulumsMedium
t (s)x (cm)0.25 s

A 0.4 kg mass on a spring with k = 60 N/m is pulled 4 cm in the positive direction and released from rest at t = 0. Find its velocity v at t = 0.25 s (with sign).

m = 0.4 kgk = 60 N/mA = 4 cmt = 0.25 s
v = m/s
18.Springs & pendulumsHard
2.5 kgk = 350 N/mA = 16 cm

A 2.5 kg mass on a spring with k = 350 N/m is pulled 16 cm from equilibrium and released. Find its maximum speed vmax.

m = 2.5 kgk = 350 N/mA = 16 cm
vmax = m/s
19.Mechanical vibrationsMedium
k = 8 kN/mc = 160 N·s/mm = 80 kg

An 80 kg mass is supported by a spring with a stiffness of 8 kN/m and a viscous damper with a damping coefficient of 160 N·s/m. Find the damping ratio ζ.

m = 80 kgk = 8 kN/mc = 160 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 15k2​ = 60m = 25 kg

A 25 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 15 kN/m and k₂ = 60 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 15 kN/mk2 = 60 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 85.73 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 100/3.6 = 27.78 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 27.78²/(2·4.5) = 85.73 m

Answer

s = 85.73 m
2.Kinematics

Answer: d = 81 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Two parts of the time

½·9.81·t₁² = 343·(4.3 − t₁)
4.905·t₁² + 343·t₁ − 1475 = 0

Fall time

Only the positive root is physical.

t₁ = (−343 + √(343² + 4·4.905·1475))/(2·4.905) = 4.064 s

Depth

d = ½·9.81·4.064² = 81 m

Answer

d = 81 m
3.Newton’s laws

Answer: a = 3.206 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 30° − 0.2·cos 30°) = 9.81·(0.5 − 0.1732) = 3.206 m/s²

Answer

a = 3.206 m/s²
4.Newton’s laws

Answer: T = 26.78 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (29.43 − 20.6)/10 = 0.8829 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 7·0.8829 + 20.6 = 26.78 N

Answer

T = 26.78 N
5.Projectile motion

Answer: H = 8.116 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 22·cos 35° = 18.02 m/s
vy = v0·sin θ = 22·sin 35° = 12.62 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 12.62²/(2·9.81) = 8.116 m

Answer

H = 8.116 m
6.Projectile motion

Answer: t = 4.011 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 32·cos 20° = 30.07 m/s
vy = v0·sin θ = 32·sin 20° = 10.94 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 35 + 10.94·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (10.94 + √(119.8 + 686.7))/9.81 = 4.011 s

Answer

t = 4.011 s
7.Circular motion

Answer: vmax = 11.72 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·20) = 11.72 m/s

Answer

vmax = 11.72 m/s (42.19 km/h)
8.Circular motion

Answer: T = 125.5 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1·9.81 + 1·9²/0.7 = 9.81 + 115.7 = 125.5 N

Answer

T = 125.5 N
9.Work & energy

Answer: v = 12.97 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·19·(0.6428 − 0.25·0.766)) = 12.97 m/s

Answer

v = 12.97 m/s
10.Work & energy

Answer: v = 6.302 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 2·9.81 = 19.62 N
mg·sin θ = 8.292 N
μ·mg·cos θ = 1.778 N

Work–energy

½mv² = (20 − 10.07)·4 = 39.72 J
v = √(2·39.72/2) = 6.302 m/s

Answer

v = 6.302 m/s
11.Momentum & collisions

Answer: v = 400 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.09) = 1.329 m/s

Collision

m·v = (m + M)·V → v = (0.015 + 4.5)·1.329/0.015 = 400 m/s

Answer

v = 400 m/s
12.Momentum & collisions

Answer: v′ = 11.76 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1900·10 = 19000 kg·m/s
py = 1300·25 = 32500 kg·m/s

Speed of the wreck

v′ = √(px² + py²)/(m1 + m2) = 37646/3200 = 11.76 m/s

Answer

v′ = 11.76 m/s
13.Rigid-body rotation

Answer: v = 8.046 m/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 = 6·9.81·1.1 = 64.75 J

Moment of inertia about the pin

IO = m·L²/3 = 6·2.2²/3 = 9.68 kg·m²

Energy balance

½·IO·ω² = 64.75 → ω = √(2·64.75/9.68) = 3.657 rad/s
v = ω·L = 3.657·2.2 = 8.046 m/s

Answer

v = 8.046 m/s
14.Rigid-body rotation

Answer: n2 = 83.72 rpm

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = 4 + 2·3.5·0.7² = 7.43 kg·m²
I2 = 4 + 2·3.5·0.25² = 4.438 kg·m²

Conservation of angular momentum

n2 = n1·I1/I2 = 50·7.43/4.438 = 83.72 rpm

Answer

n2 = 83.72 rpm

The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.

15.Gears & gear trains

Answer: T1 = 70.03 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 11000/157.1 = 70.03 N·m

Answer

T1 = 70.03 N·m
16.Gears & gear trains

Answer: nout = 208.3 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 960·25/60 = 400 rpm = nC

Second stage

nout = 400·25/48 = 208.3 rpm

Answer

nout = 208.3 rpm

total ratio = 4.608 : 1

17.Springs & pendulums

Answer: v = −0.03902 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(60/0.4) = 12.25 rad/s
ω·t = 12.25·0.25 = 3.062 rad

Velocity

v = −A·ω·sin(ω·t) = −0.04·12.25·sin(3.062) = −0.03902 m/s

Answer

v = −0.03902 m/s
18.Springs & pendulums

Answer: vmax = 1.893 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(350/2.5) = 11.83 rad/s

Maximum speed

vmax = A·ω = 0.16·11.83 = 1.893 m/s

Answer

vmax = 1.893 m/s
19.Mechanical vibrations

Answer: ζ = 0.1

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(8000·80) = 1600 N·s/m

Damping ratio

ζ = c/cc = 160/1600 = 0.1

Answer

ζ = 0.1

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 8.717 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 15 + 60 = 75 kN/m

Natural frequency

ωn = √(75000/25) = 54.77 rad/s
fn = 54.77/(2π) = 8.717 Hz

Answer

fn = 8.717 Hz

ExamProblems · examproblems.com/courses/dynamics