In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A plane needs a speed of 300 km/h to take off and the usable runway is 900 m long. Starting from rest, what constant acceleration a does it need?
v₀ = 0v = 300 km/hs = 900 m
a = m/s²
2.KinematicsHard
A ball is thrown straight up at 16 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 16 m/sh₀ = 25 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 13 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 13 kgθ = 20°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 4 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3.5 kg mass. The coefficient of kinetic friction between block and table is 0.2. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 4 kgm2 = 3.5 kgμ = 0.2g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 70° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 26 m/sθ = 70°g = 9.81 m/s²
x = m
6.Projectile motionHard
A ball is launched at 25° above horizontal from the top of a 15 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 24 m/sθ = 25°h = 15 mg = 9.81 m/s²
x = m
7.Circular motionMedium
A small ball on a string of length 0.9 m moves in a horizontal circle so that the string makes a constant angle of 20° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the speed v of the ball.
L = 0.9 mθ = 20°g = 9.81 m/s²
v = m/s
8.Circular motionHard
A 4 kg cart is released from rest at a height of 49 m on a frictionless track and runs through a vertical loop of radius 10 m. Use g = 9.81 m/s². Find the normal force Ntop of the track on the cart at the top of the loop.
m = 4 kgh = 49 mR = 10 mg = 9.81 m/s²
Ntop = N
9.Work & energyMedium
A block slides from rest down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.25. Find its speed v after it has slid 12 m along the slope.
θ = 40°μ = 0.25d = 12 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
A 0.5 kg block is released from rest at height 4.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4 m long (μ = 0.25) and then runs onto a spring (k = 2500 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.
m = 0.5 kgh = 4.5 mL = 4 mμ = 0.25k = 2500 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
A 4.5 kg glider moving at 6 m/s makes a perfectly elastic head-on collision with a 1.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 4.5 kgm2 = 1.5 kgv1 = 6 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
A 0.55 kg ball hits a wall at 21 m/s and bounces straight back at 20 m/s. The contact lasts 5 ms. Find the average force Favg of the wall on the ball.
m = 0.55 kgvin = 21 m/svout = 20 m/sΔt = 5 ms
Favg = N
13.Rigid-body rotationMedium
A uniform slender rod of mass 9 kg and length 0.7 m is pinned at one end and released from rest in a horizontal position. A small ball of mass 1.5 kg is fixed to its free end. Ignore friction and use g = 9.81 m/s². Find the angular velocity ω of the rod as it swings through the vertical position.
m = 9 kgL = 0.7 mmball = 1.5 kgg = 9.81 m/s²
ω = rad/s
14.Rigid-body rotationHard
A uniform solid disc (mass 18 kg, radius 0.2 m) spins freely at 600 rpm about a vertical frictionless shaft. A thin ring of mass 18 kg and the same radius is dropped onto it from rest, centred on the shaft, and the two quickly spin together. How much kinetic energy ΔE is lost in the process?
Mdisc = 18 kgMring = 18 kgR = 0.2 mn1 = 600 rpm
ΔE = J
15.Gears & gear trainsMedium
A 125 mm pulley at 1500 rpm drives a 315 mm pulley by a belt with 1 % slip. Find the speed n2 of the driven pulley.
n1 = 1500 rpmd1 = 125 mmd2 = 315 mms = 1 %
n2 = rpm
16.Gears & gear trainsHard
An open belt connects a 200 mm pulley and a 400 mm pulley whose centres are 1000 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.
d1 = 200 mmd2 = 400 mmC = 1000 mm
θ = °
17.Springs & pendulumsMedium
A simple pendulum has a length of 1.4 m. Use g = 9.81 m/s². Find its period T for small swings.
L = 1.4 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
A 1.3 kg mass is attached to the lower end of an unstretched vertical spring with k = 240 N/m and released from rest. Use g = 9.81 m/s². Find the greatest speed vmax of the mass.
m = 1.3 kgk = 240 N/mg = 9.81 m/s²
vmax = m/s
19.Mechanical vibrationsMedium
A 40 kg mass is supported by a spring with a stiffness of 150 kN/m and a viscous damper with a damping coefficient of 1960 N·s/m. Find the damping ratio ζ.
m = 40 kgk = 150 kN/mc = 1960 N·s/m
ζ =
20.Mechanical vibrationsHard
A 40 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 12 kN/m and the lower one k₂ = 25 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.
m = 40 kgk1 = 12 kN/mk2 = 25 kN/m
keq = kN/m
3Solutions
1.Kinematics
Answer: a = 3.858 m/s²
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v = 300/3.6 = 83.33 m/s
Acceleration
a = v²/(2s) = 83.33²/(2·900) = 3.858 m/s²
Answer
a = 3.858 m/s²
2.Kinematics
Answer: t = 4.416 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−25 = 16·t − ½·9.81·t²
4.905·t² − 16·t − 25 = 0
Solve the quadratic
Only the positive root is physical.
t = (16 + √(16² + 2·9.81·25))/9.81 = 4.416 s
Answer
t = 4.416 s
3.Newton’s laws
Answer: a = 2.433 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 26·cos 70° = 8.893 m/s
vy = v0·sin θ = 26·sin 70° = 24.43 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·24.43/9.81 = 4.981 s
Horizontal distance
x = vx·t = 8.893·4.981 = 44.29 m
Answer
x = 44.29 m
6.Projectile motion
Answer: x = 66.68 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 24·cos 25° = 21.75 m/s
vy = v0·sin θ = 24·sin 25° = 10.14 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 15 + 10.14·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (10.14 + √(102.9 + 294.3))/9.81 = 3.065 s
Horizontal distance
x = vx·t = 21.75·3.065 = 66.68 m
Answer
x = 66.68 m
7.Circular motion
Answer: v = 1.048 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Radius of the circle
r = L·sin θ = 0.9·sin 20° = 0.3078 m
Speed
Tension and gravity together give the inward force: tan θ = v²/(r·g).
v = √(r·g·tan θ) = √(0.3078·9.81·tan 20°) = 1.048 m/s
Answer
v = 1.048 m/s
8.Circular motion
Answer: Ntop = 188.4 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Speed from energy conservation
v² = 2·9.81·(49 − 2·10) = 569 m²/s²
Forces
Towards the centre is positive.
N = m·v²/R − m·g = 4·569/10 − 39.24 = 188.4 N
Answer
Ntop = 188.4 N
9.Work & energy
Answer: v = 10.31 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·12·(0.6428 − 0.25·0.766)) = 10.31 m/s
Answer
v = 10.31 m/s
10.Work & energy
Answer: v = 8.287 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 4.905·(4.5 − 0.25·4) = 17.17 J
Speed at the spring
½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·3.5) = 8.287 m/s
Answer
v = 8.287 m/s
11.Momentum & collisions
Answer: v′1 = 3 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (4.5 − 1.5)/(4.5 + 1.5)·6 = 3 m/s
v′2 = 2·4.5/(4.5 + 1.5)·6 = 9 m/s
Answer
v′1 = 3 m/s
12.Momentum & collisions
Answer: Favg = 4510 N
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.55·(20 + 21) = 22.55 N·s
Average force
Favg = J/Δt = 22.55/0.005 = 4510 N
Answer
Favg = 4510 N
13.Rigid-body rotation
Answer: ω = 6.113 rad/s
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Moments of inertia
I1 = ½·18·0.2² = 0.36 kg·m²
I2 = 18·0.2² = 0.72 kg·m²
Conservation of angular momentum
n2 = n1·I1/(I1 + I2) = 600·0.36/1.08 = 200 rpm
Kinetic energy before and after
E1 = ½·0.36·62.83² = 710.6 J
E2 = ½·1.08·20.94² = 236.9 J
ΔE = 710.6 − 236.9 = 473.7 J
Answer
ΔE = 473.7 J
15.Gears & gear trains
Answer: n2 = 589.3 rpm
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Speed without slip
1500·125/315 = 595.2 rpm
With slip
n2 = 595.2·0.99 = 589.3 rpm
Answer
n2 = 589.3 rpm
16.Gears & gear trains
Answer: θ = 168.5 °
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt angle
asin(0.1) = 5.739°
Angle of wrap
θ = 180 − 2·5.739 = 168.5°
Answer
θ = 168.5°
17.Springs & pendulums
Answer: T = 2.374 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Pendulum period
T = 2π·√(1.4/9.81) = 2.374 s
Answer
T = 2.374 s
18.Springs & pendulums
Answer: vmax = 0.722 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Equilibrium and amplitude
x₀ = m·g/k = 1.3·9.81/240 = 0.05314 m = A
Greatest speed
The speed is largest at equilibrium.
ω = √(240/1.3) = 13.59 rad/s
vmax = A·ω = 0.05314·13.59 = 0.722 m/s
Answer
vmax = 0.722 m/s
19.Mechanical vibrations
Answer: ζ = 0.4001
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(150000·40) = 4899 N·s/m
Damping ratio
ζ = c/cc = 1960/4899 = 0.4001
Answer
ζ = 0.4001
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: keq = 8.108 kN/m
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.