Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)1.736 s13.89

A car driving at 50 km/h brakes with a constant deceleration of 8 m/s² until it stops. Find the braking distance s.

v₀ = 50 km/ha = −8 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 17 m/s20 m

A ball is thrown straight up at 17 m/s from the edge of a roof 20 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 17 m/sh₀ = 20 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 35°a = ?m = 8 kg

An 8 kg block slides down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 8 kgθ = 35°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
4 kg8 kgTF = 95 Nμ = 0.15

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 95 N pulls the front 8 kg block; the 4 kg block is towed behind. The coefficient of kinetic friction is 0.15 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.

m1 = 4 kgm2 = 8 kgF = 95 Nμ = 0.15g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 22 m/s25°x = ?

A ball is launched at 25° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 22 m/sθ = 25°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 10 mv0​ = 23 m/s55°range

A ball is launched at 55° above horizontal from the top of a 10 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 23 m/sθ = 55°h = 10 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 65 mvmax​ = ?

A car takes a flat curve of radius 65 m. The coefficient of static friction between tyres and road is 0.3. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 65 mμs = 0.3g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.9 mv = ?

A ball on a string 0.9 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 0.9 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
90 km/h8°2000 kg

A 2000 kg car drives up an 8° slope at a constant 90 km/h. Air resistance and rolling resistance together amount to 450 N. Find the power P the wheels must deliver, in kW.

m = 2000 kgθ = 8°Fr = 450 Nv = 90 km/hg = 9.81 m/s²
P = kW
10.Work & energyHard
k = 5000 N/m25°μ = 0.30.5 kg

A spring of stiffness 5000 N/m at the bottom of a 25° slope is compressed by 15 cm against a 0.5 kg block and released. The coefficient of kinetic friction between block and slope is 0.3. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)

m = 0.5 kgk = 5000 N/mx = 15 cmθ = 25°μ = 0.3g = 9.81 m/s²
d = m
11.Momentum & collisionsMedium
1 kgv = ?12 gh = 6 cm

A 12 g bullet is fired horizontally into a 1 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 6 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 12 gM = 1 kgh = 6 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
14 m/s16 m/s

A 0.5 kg ball hits a wall at 14 m/s and bounces straight back at 16 m/s. The contact lasts 25 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.5 kgvin = 14 m/svout = 16 m/sΔt = 25 ms
J = N·s
13.Rigid-body rotationMedium
L = 2.5 mm = 2.5 kgα

A uniform slender rod of mass 2.5 kg and length 2.5 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the acceleration atip of the free end just after release.

m = 2.5 kgL = 2.5 mg = 9.81 m/s²
atip = m/s²
14.Rigid-body rotationHard
400 m/s35 g0.28 mL = 0.7 m4.5 kgφ

A uniform slender rod of mass 4.5 kg and length 0.7 m hangs at rest from a frictionless pivot at its top end. A 35 g bullet moving horizontally at 400 m/s hits the rod 0.28 m below the pivot and stays embedded. Use g = 9.81 m/s². Find the largest angle φ from the vertical through which the rod swings.

M = 4.5 kgL = 0.7 mm = 35 gv = 400 m/sd = 0.28 mg = 9.81 m/s²
φ = °
15.Gears & gear trainsMedium
N1​ = 20N2​ = 25

A 2.2 kW motor running at 1440 rpm drives a pinion with 20 teeth, which meshes with a gear with 25 teeth. Ignore losses. Find the torque T1 on the motor shaft.

P = 2.2 kWn1 = 1440 rpmN1 = 20N2 = 25η = 100%
T1 = N·m
16.Gears & gear trainsHard
A = 12B = 32C = 24D = 32

In a compound gear train, gear A (12 teeth) on the input shaft turning at 960 rpm drives gear B (32 teeth). Gear C (24 teeth) is fixed to the same shaft as B and drives gear D (32 teeth) on the output shaft. Find the output speed nout.

nin = 960 rpmA = 12B = 32C = 24D = 32
nout = rpm
17.Springs & pendulumsMedium
2.4 kgk = 300 N/mA = 19 cmx = 13 cm

A 2.4 kg mass on a spring with k = 300 N/m oscillates on a frictionless surface with an amplitude of 19 cm. Find its speed v when it is 13 cm from equilibrium.

m = 2.4 kgk = 300 N/mA = 19 cmx = 13 cm
v = m/s
18.Springs & pendulumsHard
3.5 kgk = 700 N/m150 m/s

A 12 g bullet moving at 150 m/s hits and stays in a 3.5 kg block resting on a frictionless surface. The block is attached to a horizontal spring with k = 700 N/m. Find the amplitude A of the resulting oscillation in cm.

m = 12 gv = 150 m/sM = 3.5 kgk = 700 N/m
A = cm
19.Mechanical vibrationsMedium
k = 50 kN/mζ = 0.7m = 80 kg

An 80 kg mass on a spring with a stiffness of 50 kN/m has a viscous damper giving a damping ratio of 0.7. Find the damped natural frequency fd of its free vibration in Hz.

m = 80 kgk = 50 kN/mζ = 0.7
fd = Hz
20.Mechanical vibrationsHard
k1​ = 40k2​ = 30k3​ = 60m = 100 kg

A 100 kg mass hangs from spring k₃ = 60 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 40 kN/m and k₂ = 30 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 40 kN/mk2 = 30 kN/mk3 = 60 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 12.06 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 50/3.6 = 13.89 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 13.89²/(2·8) = 12.06 m

Answer

s = 12.06 m
2.Kinematics

Answer: t = 4.394 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−20 = 17·t − ½·9.81·t²
4.905·t² − 17·t − 20 = 0

Solve the quadratic

Only the positive root is physical.

t = (17 + √(17² + 2·9.81·20))/9.81 = 4.394 s

Answer

t = 4.394 s
3.Newton’s laws

Answer: a = 4.823 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 35° − 0.1·cos 35°) = 9.81·(0.5736 − 0.08192) = 4.823 m/s²

Answer

a = 4.823 m/s²
4.Newton’s laws

Answer: a = 6.445 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (95 − 17.66)/12 = 6.445 m/s²

Answer

a = 6.445 m/s²
5.Projectile motion

Answer: x = 37.79 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 22·cos 25° = 19.94 m/s
vy = v0·sin θ = 22·sin 25° = 9.298 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·9.298/9.81 = 1.896 s

Horizontal distance

x = vx·t = 19.94·1.896 = 37.79 m

Answer

x = 37.79 m
6.Projectile motion

Answer: t = 4.314 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 23·cos 55° = 13.19 m/s
vy = v0·sin θ = 23·sin 55° = 18.84 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 10 + 18.84·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (18.84 + √(355 + 196.2))/9.81 = 4.314 s

Answer

t = 4.314 s
7.Circular motion

Answer: vmax = 13.83 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.3·9.81·65) = 13.83 m/s

Answer

vmax = 13.83 m/s (49.79 km/h)
8.Circular motion

Answer: vmin = 2.971 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·0.9) = 2.971 m/s

Answer

vmin = 2.971 m/s
9.Work & energy

Answer: P = 79.51 kW

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.

Driving force

m·g = 2000·9.81 = 19620 N
mg·sin θ = 19620·sin 8° = 2731 N
F = 2731 + 450 = 3181 N

Power

v = 90/3.6 = 25 m/s
P = F·v = 3181·25 = 79514 W = 79.51 kW

Answer

P = 79.51 kW
10.Work & energy

Answer: d = 16.51 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 15 cm = 0.15 m
½kx² = ½·5000·0.15² = 56.25 J

Energy balance along the slope

m·g = 0.5·9.81 = 4.905 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 56.25/(4.905·(0.4226 + 0.3·0.9063)) = 16.51 m

Answer

d = 16.51 m
11.Momentum & collisions

Answer: v = 91.5 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.06) = 1.085 m/s

Collision

m·v = (m + M)·V → v = (0.012 + 1)·1.085/0.012 = 91.5 m/s

Answer

v = 91.5 m/s
12.Momentum & collisions

Answer: J = 15 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.5·(16 + 14) = 15 N·s

Answer

J = 15 N·s
13.Rigid-body rotation

Answer: atip = 14.71 m/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.5) = 5.886 rad/s²

Acceleration of the free end

atip = α·L = 5.886·2.5 = 14.71 m/s²

Answer

atip = 14.71 m/s²

atip = 1.5·g for any length: the free end falls faster than a dropped stone.

14.Rigid-body rotation

Answer: φ = 70.72 °

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 4.5·0.7²/3 + 0.035·0.28² = 0.7377 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.035·400·0.28/0.7377 = 5.313 rad/s

Energy during the swing

½·I·ω² = ½·0.7377·5.313² = 10.41 J
(M·g·L/2 + m·g·d)·(1 − cos φ) = 15.55·(1 − cos φ)
cos φ = 1 − 10.41/15.55 = 0.3301 → φ = 70.72°

Answer

φ = 70.72°
15.Gears & gear trains

Answer: T1 = 14.59 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1440/60 = 150.8 rad/s
T1 = P/ω₁ = 2200/150.8 = 14.59 N·m

Answer

T1 = 14.59 N·m
16.Gears & gear trains

Answer: nout = 270 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 960·12/32 = 360 rpm = nC

Second stage

nout = 360·24/32 = 270 rpm

Answer

nout = 270 rpm

total ratio = 3.556 : 1

17.Springs & pendulums

Answer: v = 1.549 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(300/2.4) = 11.18 rad/s

Speed at x

v = ω·√(A² − x²) = 11.18·√(0.19² − 0.13²) = 1.549 m/s

Answer

v = 1.549 m/s
18.Springs & pendulums

Answer: A = 3.63 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Speed after impact

V = m·v/(m + M) = 0.012·150/3.512 = 0.5125 m/s

Angular frequency

ω = √(k/(m + M)) = √(700/3.512) = 14.12 rad/s

Amplitude

A = V/ω = 0.5125/14.12 = 0.0363 m = 3.63 cm

Answer

A = 3.63 cm
19.Mechanical vibrations

Answer: fd = 2.841 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(50000/80) = 25 rad/s
fn = 25/(2π) = 3.979 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 3.979·√(1 − 0.7²) = 2.841 Hz

Answer

fd = 2.841 Hz
20.Mechanical vibrations

Answer: fn = 2.861 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 40 + 30 = 70 kN/m
keq = 70·60/(70 + 60) = 32.31 kN/m

Natural frequency

ωn = √(32308/100) = 17.97 rad/s
fn = 17.97/(2π) = 2.861 Hz

Answer

fn = 2.861 Hz

ExamProblems · examproblems.com/courses/dynamics