Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?16.67

A car driving at 60 km/h brakes with a constant deceleration of 5.5 m/s² until it stops. How long does braking take? Find t.

v₀ = 60 km/ha = −5.5 m/s²v = 0
t = s
2.KinematicsHard
t (s)v (m/s)10 s

A tram starts from rest and accelerates at 3 m/s² for 10 s, then runs at constant speed for 5 s, and finally brakes at 4 m/s² until it stops. Find the total distance s between the two stops.

a1 = 3 m/s²t1 = 10 st2 = 5 sa3 = −4 m/s²
s = m
3.Newton’s lawsMedium
θ = 35°a = ?m = 16 kg

A 16 kg block slides down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 16 kgθ = 35°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 1.5 kg1 kgμ = 0.1

A 1.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 1 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 1.5 kgm2 = 1 kgμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 32 m/s55°rangeH = ?

A ball is launched at 55° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 32 m/sθ = 55°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 60 mv0​ = 28 m/s15°range

A ball is launched at 15° above horizontal from the top of a 60 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 28 m/sθ = 15°h = 60 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 70 m11 m/s

A 1200 kg car drives over the top of a hump in the road at 11 m/s. The top of the hump is a circular arc of radius 70 m. Use g = 9.81 m/s². Find the normal force N of the road on the car at the top.

m = 1200 kgv = 11 m/sr = 70 mg = 9.81 m/s²
N = N
8.Circular motionHard
r = 0.8 mv = 7.5 m/s

A 1.3 kg ball on a string 0.8 m long is swung in a vertical circle. At the lowest point it moves at 7.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.3 kgr = 0.8 mv = 7.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
0.5 kgk = 1000 N/mh = ?

A toy launcher has a vertical spring of stiffness 1000 N/m. A 0.5 kg ball is placed on it and the spring is compressed by 8 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.

m = 0.5 kgk = 1000 N/mx = 8 cmg = 9.81 m/s²
h = m
10.Work & energyHard
h = 4 mL = 1 mμ = 0.2k = 800 N/m

A 5 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1 m long (μ = 0.2) and then runs onto a spring (k = 800 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 5 kgh = 4 mL = 1 mμ = 0.2k = 800 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
1300 kg19 m/s700 kg

A 1300 kg car moving at 19 m/s runs into a stationary 700 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 1300 kgv1 = 19 m/sm2 = 700 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
4.5 kgv = ?10 g10°L = 1.6 m

A 10 g bullet is fired horizontally into a 4.5 kg block hanging from light strings 1.6 m long, and stays in it. The strings swing out to a largest angle of 10° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 10 gM = 4.5 kgL = 1.6 mθ = 10°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
L = 2.1 mm = 4.5 kgα

A uniform slender rod of mass 4.5 kg and length 2.1 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 4.5 kgL = 2.1 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
0.85 m0.25 mn1​ = 40 rpm

A person stands on a frictionless turntable and holds a 1 kg dumbbell in each hand, 0.85 m from the axis. The person and turntable alone have a moment of inertia of 5 kg·m² about the axis. They turn at 40 rpm, then pull the dumbbells in to 0.25 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.

I0 = 5 kg·m²m = 2 × 1 kgr1 = 0.85 mr2 = 0.25 mn1 = 40 rpm
n2 = rpm
15.Gears & gear trainsMedium
N1​ = ?N2​

Two parallel shafts are 126 mm apart. They must be connected by a pair of spur gears with a module of 3 mm and a speed reduction of 2.5 : 1. How many teeth N1 must the pinion have?

a = 126 mmm = 3 mmi = 2.5
N1 =
16.Gears & gear trainsHard
d1​ = 100 mmd2​ = 315 mm1440 rpmC = 500 mmθ = ?

An open belt connects a 100 mm pulley and a 315 mm pulley whose centres are 500 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 100 mmd2 = 315 mmC = 500 mm
θ = °
17.Springs & pendulumsMedium
2.4 kgk = 370 N/mA = 12 cmx = 2 cm

A 2.4 kg mass on a spring with k = 370 N/m oscillates on a frictionless surface with an amplitude of 12 cm. Find its speed v when it is 2 cm from equilibrium.

m = 2.4 kgk = 370 N/mA = 12 cmx = 2 cm
v = m/s
18.Springs & pendulumsHard
mk = 430 N/mA = 4 cmx = 3 cm

A mass on a spring with k = 430 N/m oscillates on a frictionless surface with an amplitude of 4 cm. Find its kinetic energy K when it is 3 cm from equilibrium.

k = 430 N/mA = 4 cmx = 3 cm
K = J
19.Mechanical vibrationsMedium
k = 40 kN/mζ = 0.4m = 80 kg

An 80 kg mass on a spring with a stiffness of 40 kN/m has a viscous damper giving a damping ratio of 0.4. Find the damped natural frequency fd of its free vibration in Hz.

m = 80 kgk = 40 kN/mζ = 0.4
fd = Hz
20.Mechanical vibrationsHard
k1​ = 5k2​ = 12m = 50 kg

A 50 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 5 kN/m and k₂ = 12 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 50 kgk1 = 5 kN/mk2 = 12 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: t = 3.03 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 60/3.6 = 16.67 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 16.67/5.5 = 3.03 s

Answer

t = 3.03 s
2.Kinematics

Answer: s = 412.5 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Top speed

v = a1·t1 = 3·10 = 30 m/s

Distance of each phase

s1 = ½·3·10² = 150 m
s2 = 30·5 = 150 m
s3 = 30²/(2·4) = 112.5 m

Total distance

s = 150 + 150 + 112.5 = 412.5 m

Answer

s = 412.5 m
3.Newton’s laws

Answer: a = 4.421 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 35° − 0.15·cos 35°) = 9.81·(0.5736 − 0.1229) = 4.421 m/s²

Answer

a = 4.421 m/s²
4.Newton’s laws

Answer: T = 6.475 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (9.81 − 1.472)/2.5 = 3.335 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 1.5·3.335 + 1.472 = 6.475 N

Answer

T = 6.475 N
5.Projectile motion

Answer: H = 35.02 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 32·cos 55° = 18.35 m/s
vy = v0·sin θ = 32·sin 55° = 26.21 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 26.21²/(2·9.81) = 35.02 m

Answer

H = 35.02 m
6.Projectile motion

Answer: t = 4.313 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 28·cos 15° = 27.05 m/s
vy = v0·sin θ = 28·sin 15° = 7.247 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 60 + 7.247·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (7.247 + √(52.52 + 1177))/9.81 = 4.313 s

Answer

t = 4.313 s
7.Circular motion

Answer: N = 9698 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the top

Towards the centre (down) is positive.

m·g − N = m·v²/r
N = 1200·9.81 − 1200·11²/70 = 11772 − 2074 = 9698 N

Answer

N = 9698 N

The car feels lighter: the road pushes up less than its weight.

8.Circular motion

Answer: T = 104.2 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.3·9.81 + 1.3·7.5²/0.8 = 12.75 + 91.41 = 104.2 N

Answer

T = 104.2 N
9.Work & energy

Answer: h = 0.6524 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 8 cm = 0.08 m
½kx² = ½·1000·0.08² = 3.2 J

Height

m·g = 0.5·9.81 = 4.905 N
h = ½kx²/(mg) = 3.2/4.905 = 0.6524 m

Answer

h = 0.6524 m
10.Work & energy

Answer: x = 68.26 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 49.05·(4 − 0.2·1) = 186.4 J

Maximum compression

½kx² = 186.4 → x = √(2·186.4/800) = 0.6826 m = 68.26 cm

Answer

x = 68.26 cm
11.Momentum & collisions

Answer: ΔK = 82128 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1300·19/2000 = 12.35 m/s

Kinetic energy before and after

Kbefore = ½·1300·19² = 234650 J
Kafter = ½·2000·12.35² = 152523 J

Energy lost

ΔK = 234650 − 152523 = 82128 J

Answer

ΔK = 82128 J

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: v = 311.5 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.6·(1 − cos 10°) = 0.02431 m

Speed after impact

V = √(2·9.81·0.02431) = 0.6906 m/s

Collision

v = (m + M)·V/m = 4.51·0.6906/0.01 = 311.5 m/s

Answer

v = 311.5 m/s
13.Rigid-body rotation

Answer: R = 11.04 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.1) = 7.007 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 4.5·(9.81 − 7.357) = 11.04 N

Answer

R = 11.04 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: n2 = 50.3 rpm

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = 5 + 2·1·0.85² = 6.445 kg·m²
I2 = 5 + 2·1·0.25² = 5.125 kg·m²

Conservation of angular momentum

n2 = n1·I1/I2 = 40·6.445/5.125 = 50.3 rpm

Answer

n2 = 50.3 rpm

The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.

15.Gears & gear trains

Answer: N1 = 24

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·126/3 = 84

Split by the ratio

N1 = 84/(1 + 2.5) = 24

Answer

N1 = 24
16.Gears & gear trains

Answer: θ = 155.2 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.215) = 12.42°

Angle of wrap

θ = 180 − 2·12.42 = 155.2°

Answer

θ = 155.2°
17.Springs & pendulums

Answer: v = 1.469 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(370/2.4) = 12.42 rad/s

Speed at x

v = ω·√(A² − x²) = 12.42·√(0.12² − 0.02²) = 1.469 m/s

Answer

v = 1.469 m/s
18.Springs & pendulums

Answer: K = 0.1505 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Total energy

E = ½·k·A² = ½·430·0.04² = 0.344 J

Spring energy at x

U = ½·k·x² = ½·430·0.03² = 0.1935 J

Kinetic energy

K = 0.344 − 0.1935 = 0.1505 J

Answer

K = 0.1505 J
19.Mechanical vibrations

Answer: fd = 3.262 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(40000/80) = 22.36 rad/s
fn = 22.36/(2π) = 3.559 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 3.559·√(1 − 0.4²) = 3.262 Hz

Answer

fd = 3.262 Hz
20.Mechanical vibrations

Answer: keq = 17 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 5 + 12 = 17 kN/m

Answer

keq = 17 kN/m

ExamProblems · examproblems.com/courses/dynamics