Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 5 m/s²car22 m/s

A car speeding at a constant 22 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 5 m/s². How far from its starting point does the police car catch up? Find d.

vcar = 22 m/sapolice = 5 m/s²v0,police = 0
d = m
2.KinematicsHard
v₀ = 10 m/s35 m

A ball is thrown straight up at 10 m/s from the edge of a roof 35 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 10 m/sh₀ = 35 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
3 kg2.5 kg

Masses of 3 kg and 2.5 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 3 kgm2 = 2.5 kgg = 9.81 m/s²
T = N
4.Newton’s lawsHard
m1​ = 7 kg6 kgμ = 0.2

A 7 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 6 kg mass. The coefficient of kinetic friction between block and table is 0.2. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 7 kgm2 = 6 kgμ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 18 m/s50°range

A ball is launched at 50° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 18 m/sθ = 50°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 30 mv0​ = 18 m/s15°x = ?

A ball is launched at 15° above horizontal from the top of a 30 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 18 m/sθ = 15°h = 30 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 95 mvmax​ = ?

A car takes a flat curve of radius 95 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 95 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.8 mv = ?

A ball on a string 0.8 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 0.8 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
45°d = 11 mμ = 0.2

A 5 kg block slides 11 m down a slope at 45° to the horizontal, with a coefficient of kinetic friction of 0.2. Find the work Wf done against friction.

m = 5 kgθ = 45°μ = 0.2d = 11 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 5 mL = 5 mμ = 0.3k = 1500 N/m

A 2 kg block is released from rest at height 5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 5 m long (μ = 0.3) and then runs onto a spring (k = 1500 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 2 kgh = 5 mL = 5 mμ = 0.3k = 1500 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
800 kg20 m/s1000 kg

An 800 kg car moving at 20 m/s runs into a stationary 1000 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?

m1 = 800 kgv1 = 20 m/sm2 = 1000 kgv2 = 0
ΔK/K = %
12.Momentum & collisionsHard
1100 kg19 m/s1600 kg17 m/sθ = ?

At a crossing a 1100 kg car travelling east at 19 m/s collides with a 1600 kg car travelling north at 17 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.

m1 = 1100 kgv1 = 19 m/s (E)m2 = 1600 kgv2 = 17 m/s (N)
θ = °
13.Rigid-body rotationMedium
v = ?2 kgL = 1.3 mm = 4.5 kg

A uniform slender rod of mass 4.5 kg and length 1.3 m is pinned at one end and released from rest in a horizontal position. A small ball of mass 2 kg is fixed to its free end. Ignore friction and use g = 9.81 m/s². Find the speed v of the free end as the rod swings through the vertical position.

m = 4.5 kgL = 1.3 mmball = 2 kgg = 9.81 m/s²
v = m/s
14.Rigid-body rotationHard
θ = 15°a

A hollow sphere rolls without slipping down a slope inclined at 15° to the horizontal. Use g = 9.81 m/s². Find the smallest coefficient of static friction μs that prevents it from slipping.

θ = 15°I = (2/3)·m·r²g = 9.81 m/s²
μs =
15.Gears & gear trainsMedium
N1​ = 16N2​ = 72

A 1.5 kW motor running at 1450 rpm drives a pinion with 16 teeth, which meshes with a gear with 72 teeth. The gear pair has an efficiency of 96%. Find the output torque T2 on the gear shaft.

P = 1.5 kWn1 = 1450 rpmN1 = 16N2 = 72η = 96%
T2 = N·m
16.Gears & gear trainsHard
A = 48B = 60C = 40D = 60

In a compound gear train, gear A (48 teeth) on the input shaft turning at 1440 rpm drives gear B (60 teeth). Gear C (40 teeth) is fixed to the same shaft as B and drives gear D (60 teeth) on the output shaft. Find the output speed nout.

nin = 1440 rpmA = 48B = 60C = 40D = 60
nout = rpm
17.Springs & pendulumsMedium
t (s)x (cm)1.4 s

A 0.5 kg mass on a spring with k = 150 N/m is pulled 3 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 1.4 s (with sign).

m = 0.5 kgk = 150 N/mA = 3 cmt = 1.4 s
x = cm
18.Springs & pendulumsHard
2.9 kgk = 380 N/mA = 9 cm

A 2.9 kg mass on a spring with k = 380 N/m is pulled 9 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 2.9 kgk = 380 N/mA = 9 cm
E = J
19.Mechanical vibrationsMedium
k = 5 kN/mζ = 0.35m = 10 kg

A 10 kg mass on a spring with a stiffness of 5 kN/m has a viscous damper giving a damping ratio of 0.35. Find the damped natural frequency fd of its free vibration in Hz.

m = 10 kgk = 5 kN/mζ = 0.35
fd = Hz
20.Mechanical vibrationsHard
k1​ = 30k2​ = 10m = 10 kg

A 10 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 30 kN/m and k₂ = 10 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 10 kgk1 = 30 kN/mk2 = 10 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: d = 193.6 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·22/5 = 8.8 s

Distance

d = v·t = 22·8.8 = 193.6 m

Answer

d = 193.6 m

At that moment the police car moves at 2v = 44 m/s.

2.Kinematics

Answer: t = 3.879 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−35 = 10·t − ½·9.81·t²
4.905·t² − 10·t − 35 = 0

Solve the quadratic

Only the positive root is physical.

t = (10 + √(10² + 2·9.81·35))/9.81 = 3.879 s

Answer

t = 3.879 s
3.Newton’s laws

Answer: T = 26.75 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration

The net driving force is the difference of the weights; it moves the total mass.

a = (3 − 2.5)·9.81/(3 + 2.5) = 0.8918 m/s²

Tension from the lighter mass

T − m2·g = m2·a → T = 2.5·(9.81 + 0.8918) = 26.75 N

Answer

T = 26.75 N
4.Newton’s laws

Answer: T = 38.03 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (58.86 − 13.73)/13 = 3.471 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 7·3.471 + 13.73 = 38.03 N

Answer

T = 38.03 N
5.Projectile motion

Answer: t = 2.811 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 18·cos 50° = 11.57 m/s
vy = v0·sin θ = 18·sin 50° = 13.79 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·13.79/9.81 = 2.811 s

Answer

t = 2.811 s
6.Projectile motion

Answer: x = 52.04 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 18·cos 15° = 17.39 m/s
vy = v0·sin θ = 18·sin 15° = 4.659 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 30 + 4.659·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (4.659 + √(21.7 + 588.6))/9.81 = 2.993 s

Horizontal distance

x = vx·t = 17.39·2.993 = 52.04 m

Answer

x = 52.04 m
7.Circular motion

Answer: vmax = 25.54 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·95) = 25.54 m/s

Answer

vmax = 25.54 m/s (91.95 km/h)
8.Circular motion

Answer: vmin = 2.801 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·0.8) = 2.801 m/s

Answer

vmin = 2.801 m/s
9.Work & energy

Answer: Wf = 76.3 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 49.05·0.7071 = 34.68 N
F = μN = 0.2·34.68 = 6.937 N

Work against friction

Wf = F·d = 6.937·11 = 76.3 J

Answer

Wf = 76.3 J
10.Work & energy

Answer: x = 30.26 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 19.62·(5 − 0.3·5) = 68.67 J

Maximum compression

½kx² = 68.67 → x = √(2·68.67/1500) = 0.3026 m = 30.26 cm

Answer

x = 30.26 cm
11.Momentum & collisions

Answer: ΔK/K = 55.56 %

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 800·20/1800 = 8.889 m/s

Kinetic energy before and after

Kbefore = ½·800·20² = 160000 J
Kafter = ½·1800·8.889² = 71111 J

Fraction lost

ΔK/K = 88889/160000 = 55.56 %

Answer

ΔK/K = 55.56 %

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: θ = 52.46 °

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1100·19 = 20900 kg·m/s
py = 1600·17 = 27200 kg·m/s

Direction

tan θ = py/px = 1.301 → θ = 52.46°

Answer

θ = 52.46°
13.Rigid-body rotation

Answer: v = 5.565 m/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 + mball·g·L = 4.5·9.81·0.65 + 2·9.81·1.3 = 54.2 J

Moment of inertia about the pin

IO = m·L²/3 + mball·L² = 2.535 + 3.38 = 5.915 kg·m²

Energy balance

½·IO·ω² = 54.2 → ω = √(2·54.2/5.915) = 4.281 rad/s
v = ω·L = 4.281·1.3 = 5.565 m/s

Answer

v = 5.565 m/s
14.Rigid-body rotation

Answer: μs = 0.1072

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.6667·m·r²·(a/r) → f = 0.6667·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 15°/1.667 = 1.523 m/s²

Friction needed

f = c·m·a ≤ μ·m·g·cos θ → μ ≥ c·tan θ/(1 + c)
μs = 0.6667·tan 15°/1.667 = 0.1072

Answer

μs = 0.1072
15.Gears & gear trains

Answer: T2 = 42.68 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1450/60 = 151.8 rad/s
T1 = P/ω₁ = 1500/151.8 = 9.879 N·m

Output torque

T2 = 9.879·72/16·0.96 = 42.68 N·m

Answer

T2 = 42.68 N·m
16.Gears & gear trains

Answer: nout = 768 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1440·48/60 = 1152 rpm = nC

Second stage

nout = 1152·40/60 = 768 rpm

Answer

nout = 768 rpm

total ratio = 1.875 : 1

17.Springs & pendulums

Answer: x = 1.902 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(150/0.5) = 17.32 rad/s
ω·t = 17.32·1.4 = 24.25 rad

Displacement

x = A·cos(ω·t) = 3·cos(24.25) = 1.902 cm

Answer

x = 1.902 cm
18.Springs & pendulums

Answer: E = 1.539 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(380/2.9) = 11.45 rad/s

Energy

E = ½·k·A² = ½·380·0.09² = 1.539 J

Answer

E = 1.539 J
19.Mechanical vibrations

Answer: fd = 3.334 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(5000/10) = 22.36 rad/s
fn = 22.36/(2π) = 3.559 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 3.559·√(1 − 0.35²) = 3.334 Hz

Answer

fd = 3.334 Hz
20.Mechanical vibrations

Answer: keq = 40 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 30 + 10 = 40 kN/m

Answer

keq = 40 kN/m

ExamProblems · examproblems.com/courses/dynamics