Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = ?s = 1900 m

A plane needs a speed of 200 km/h to take off and the usable runway is 1900 m long. Starting from rest, what constant acceleration a does it need?

v₀ = 0v = 200 km/hs = 1900 m
a = m/s²
2.KinematicsHard
v₀ = 13 m/s15 m

A ball is thrown straight up at 13 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 13 m/sh₀ = 15 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 25°a = ?m = 18 kg

An 18 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 18 kgθ = 25°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 4.5 kg10 kgθ = 25°

A 4.5 kg block on a ramp at 25° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 10 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.25. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 4.5 kgm2 = 10 kgθ = 25°μ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = ?30°R = 60 m

A ball is launched from level ground at 30° above the horizontal and lands 60 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 30°R = 60 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 35 mv0​ = 13 m/s60°H = ?

A ball is launched at 13 m/s and 60° above the horizontal from the top of a 35 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 13 m/sθ = 60°h = 35 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 1.6 mn = ?

In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 1.6 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.4. Use g = 9.81 m/s². Find the smallest rotation rate n in revolutions per minute.

r = 1.6 mμs = 0.4g = 9.81 m/s²
n = rpm
8.Circular motionHard
θ = 18°to centrevmax​ = ?

A curve of radius 150 m is banked at 18°, and the coefficient of static friction between tyres and road is 0.25. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.

r = 150 mθ = 18°μs = 0.25g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
50 km/h

A car travelling at 50 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.6. Find the stopping distance d.

v = 50 km/hμ = 0.6g = 9.81 m/s²
d = m
10.Work & energyHard
F = 65 N15°μ = 0.210 kg

A 10 kg block starts from rest at the bottom of a 15° slope and is pulled up the slope by a constant force of 65 N parallel to the slope. The coefficient of kinetic friction is 0.2. Find the speed v of the block after it has moved 8 m up the slope.

m = 10 kgF = 65 Nθ = 15°μ = 0.2d = 8 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
5 kg5 m/s3 kg

A 5 kg glider moving at 5 m/s makes a perfectly elastic head-on collision with a 3 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 5 kgm2 = 3 kgv1 = 5 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
30 m/s20 m/s

A 0.25 kg ball hits a wall at 30 m/s and bounces straight back at 20 m/s. The contact lasts 20 ms. Find the average force Favg of the wall on the ball.

m = 0.25 kgvin = 30 m/svout = 20 m/sΔt = 20 ms
Favg = N
13.Rigid-body rotationMedium
n = 400 rpmTb​ = 195 N·mI = 26.5 kg·m²

A flywheel with a moment of inertia of 26.5 kg·m² spins at 400 rpm. A brake applies a constant friction torque of 195 N·m. How many revolutions N does the flywheel make before it stops?

I = 26.5 kg·m²n = 400 rpmTb = 195 N·m
N = rev
14.Rigid-body rotationHard
560 m/s40 g0.88 mL = 1.2 m9 kg

A uniform slender rod of mass 9 kg and length 1.2 m hangs at rest from a frictionless pivot at its top end. A 40 g bullet moving horizontally at 560 m/s hits the rod 0.88 m below the pivot and stays embedded. Find the angular velocity ω of the rod just after the impact.

M = 9 kgL = 1.2 mm = 40 gv = 560 m/sd = 0.88 m
ω = rad/s
15.Gears & gear trainsMedium
N1​N2​ = ?

Two parallel shafts are 90 mm apart. They must be connected by a pair of spur gears with a module of 2.5 mm and a speed reduction of 3 : 1. How many teeth N2 must the gear have?

a = 90 mmm = 2.5 mmi = 3
N2 =
16.Gears & gear trainsHard
d1​ = 80 mmd2​ = 400 mm1500 rpmC = 800 mmθ = ?

An open belt connects an 80 mm pulley and a 400 mm pulley whose centres are 800 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 80 mmd2 = 400 mmC = 800 mm
θ = °
17.Springs & pendulumsMedium
L = 2 mT = 4.61 s

An astronaut on another planet finds that a simple pendulum 2 m long has a period of 4.61 s for small swings. Find the gravitational acceleration g on that planet.

L = 2 mT = 4.61 s
g = m/s²
18.Springs & pendulumsHard
2 kgk = 250 N/mA = 20 cm

A 2 kg mass on a spring with k = 250 N/m is pulled 20 cm from equilibrium and released. Find its maximum speed vmax.

m = 2 kgk = 250 N/mA = 20 cm
vmax = m/s
19.Mechanical vibrationsMedium
k = 10 kN/mc = 50 N·s/mm = 10 kg

A 10 kg mass is supported by a spring with a stiffness of 10 kN/m and a viscous damper with a damping coefficient of 50 N·s/m. Find the damping ratio ζ.

m = 10 kgk = 10 kN/mc = 50 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 12k2​ = 25k3​ = 50m = 5 kg

A 5 kg mass hangs from spring k₃ = 50 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 12 kN/m and k₂ = 25 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 12 kN/mk2 = 25 kN/mk3 = 50 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: a = 0.8122 m/s²

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v = 200/3.6 = 55.56 m/s

Acceleration

a = v²/(2s) = 55.56²/(2·1900) = 0.8122 m/s²

Answer

a = 0.8122 m/s²
2.Kinematics

Answer: t = 3.519 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−15 = 13·t − ½·9.81·t²
4.905·t² − 13·t − 15 = 0

Solve the quadratic

Only the positive root is physical.

t = (13 + √(13² + 2·9.81·15))/9.81 = 3.519 s

Answer

t = 3.519 s
3.Newton’s laws

Answer: a = 1.479 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 25° − 0.3·cos 25°) = 9.81·(0.4226 − 0.2719) = 1.479 m/s²

Answer

a = 1.479 m/s²
4.Newton’s laws

Answer: T = 50.21 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 98.1 N
m₁·g·sin θ = 18.66 N
μ·m₁·g·cos θ = 10 N

Acceleration of the system

a = (98.1 − 18.66 − 10)/14.5 = 4.789 m/s²

Tension from the hanging mass

m2·g − T = m2·a → T = 10·(9.81 − 4.789) = 50.21 N

Answer

T = 50.21 N
5.Projectile motion

Answer: v0 = 26.07 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·60/sin 60°) = 26.07 m/s

Answer

v0 = 26.07 m/s
6.Projectile motion

Answer: H = 41.46 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 13·sin 60° = 11.26 m/s

Rise above the cliff

Δh = vy²/(2g) = 11.26²/(2·9.81) = 6.46 m

Height above the ground

H = 35 + 6.46 = 41.46 m

Answer

H = 41.46 m
7.Circular motion

Answer: n = 37.39 rpm

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces on a rider

N = m·ω²·r
μ·N = m·g → μ·ω²·r = g

Angular speed

ω = √(g/(μ·r)) = √(9.81/(0.4·1.6)) = 3.915 rad/s

Rotation rate

n = ω·60/(2π) = 37.39 rpm

Answer

n = 37.39 rpm
8.Circular motion

Answer: vmax = 30.34 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points down the slope.

N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g

Speed

v = √(150·9.81·0.5468/0.8738) = 30.34 m/s

Answer

vmax = 30.34 m/s
(109.2 km/h)
9.Work & energy

Answer: d = 16.39 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Speed in base units

v = 50/3.6 = 13.89 m/s

Energy balance

½mv² = μmg·d → d = v²/(2μg) = 13.89²/(2·0.6·9.81) = 16.39 m

Answer

d = 16.39 m

Doubling the speed makes the stopping distance four times longer.

10.Work & energy

Answer: v = 5.749 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 10·9.81 = 98.1 N
mg·sin θ = 25.39 N
μ·mg·cos θ = 18.95 N

Work–energy

½mv² = (65 − 44.34)·8 = 165.3 J
v = √(2·165.3/10) = 5.749 m/s

Answer

v = 5.749 m/s
11.Momentum & collisions

Answer: v′1 = 1.25 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (5 − 3)/(5 + 3)·5 = 1.25 m/s
v′2 = 2·5/(5 + 3)·5 = 6.25 m/s

Answer

v′1 = 1.25 m/s
12.Momentum & collisions

Answer: Favg = 625 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.25·(20 + 30) = 12.5 N·s

Average force

Favg = J/Δt = 12.5/0.02 = 625 N

Answer

Favg = 625 N
13.Rigid-body rotation

Answer: N = 18.97 rev

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·400/60 = 41.89 rad/s

Work of the brake equals the kinetic energy

½·I·ω² = ½·26.5·41.89² = 23248 J
θ = 23248/195 = 119.2 rad

Revolutions

N = θ/2π = 18.97 rev

Answer

N = 18.97 rev
14.Rigid-body rotation

Answer: ω = 4.53 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 9·1.2²/3 + 0.04·0.88² = 4.351 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.04·560·0.88/4.351 = 4.53 rad/s

Answer

ω = 4.53 rad/s
15.Gears & gear trains

Answer: N2 = 54

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·90/2.5 = 72

Split by the ratio

N1 = 72/(1 + 3) = 18
N2 = 3·18 = 54

Answer

N2 = 54
16.Gears & gear trains

Answer: θ = 156.9 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.2) = 11.54°

Angle of wrap

θ = 180 − 2·11.54 = 156.9°

Answer

θ = 156.9°
17.Springs & pendulums

Answer: g = 3.715 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for g

g = 4π²·L/T² = 4π²·2/4.61² = 3.715 m/s²

Answer

g = 3.715 m/s²
18.Springs & pendulums

Answer: vmax = 2.236 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(250/2) = 11.18 rad/s

Maximum speed

vmax = A·ω = 0.2·11.18 = 2.236 m/s

Answer

vmax = 2.236 m/s
19.Mechanical vibrations

Answer: ζ = 0.07906

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(10000·10) = 632.5 N·s/m

Damping ratio

ζ = c/cc = 50/632.5 = 0.07906

Answer

ζ = 0.07906

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 10.38 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 12 + 25 = 37 kN/m
keq = 37·50/(37 + 50) = 21.26 kN/m

Natural frequency

ωn = √(21264/5) = 65.21 rad/s
fn = 65.21/(2π) = 10.38 Hz

Answer

fn = 10.38 Hz

ExamProblems · examproblems.com/courses/dynamics