Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)1 s27.78

A driver moving at 100 km/h sees an obstacle. Her reaction time is 1 s, after which the car brakes with a constant deceleration of 4 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 100 km/htr = 1 sa = −4 m/s²
d = m
2.KinematicsHard
v₀ = 19 m/s30 m

A ball is thrown straight up at 19 m/s from the edge of a roof 30 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 19 m/sh₀ = 30 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
10 kg40°F = 40 Nμ = 0.1

A 10 kg sled is pulled across level snow by a rope at 40° above the horizontal with a force of 40 N. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the sled.

m = 10 kgF = 40 Nθ = 40°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 9.5 kg9 kgθ = 35°

A 9.5 kg block on a ramp at 35° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 9 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.25. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 9.5 kgm2 = 9 kgθ = 35°μ = 0.25g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 26 m/sθ = ?R = 60 m

A ball is launched from level ground at 26 m/s and must land 60 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 26 m/sR = 60 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 55 mv0​ = 22 m/s40°range

A ball is launched at 40° above horizontal from the top of a 55 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 22 m/sθ = 40°h = 55 mg = 9.81 m/s²
t = s
7.Circular motionMedium
L = 0.8 m20°

A small ball on a string of length 0.8 m moves in a horizontal circle so that the string makes a constant angle of 20° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the speed v of the ball.

L = 0.8 mθ = 20°g = 9.81 m/s²
v = m/s
8.Circular motionHard
r = 1.3 mv = 7.5 m/s

A 0.6 kg ball on a string 1.3 m long is swung in a vertical circle. At the lowest point it moves at 7.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 0.6 kgr = 1.3 mv = 7.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
40°d = 3 mμ = 0.2

A 10 kg block slides 3 m down a slope at 40° to the horizontal, with a coefficient of kinetic friction of 0.2. Find the work Wf done against friction.

m = 10 kgθ = 40°μ = 0.2d = 3 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 4.5 mL = 5 mμ = 0.1k = 5000 N/m

A 1 kg block is released from rest at height 4.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 5 m long (μ = 0.1) and then runs onto a spring (k = 5000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 1 kgh = 4.5 mL = 5 mμ = 0.1k = 5000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
3 kgv = ?12 gh = 20 cm

A 12 g bullet is fired horizontally into a 3 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 20 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 12 gM = 3 kgh = 20 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
11 m/s7 m/s

A 0.3 kg ball hits a wall at 11 m/s and bounces straight back at 7 m/s. The contact lasts 25 ms. Find the average force Favg of the wall on the ball.

m = 0.3 kgvin = 11 m/svout = 7 m/sΔt = 25 ms
Favg = N
13.Rigid-body rotationMedium
L = 2.9 mm = 15 kgα

A uniform slender rod of mass 15 kg and length 2.9 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 15 kgL = 2.9 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
580 m/s20 g1.5 mL = 2 m7 kg

A uniform slender rod of mass 7 kg and length 2 m hangs at rest from a frictionless pivot at its top end. A 20 g bullet moving horizontally at 580 m/s hits the rod 1.5 m below the pivot and stays embedded. Find the angular velocity ω of the rod just after the impact.

M = 7 kgL = 2 mm = 20 gv = 580 m/sd = 1.5 m
ω = rad/s
15.Gears & gear trainsMedium
N1​ = 16, m = 5 mm

A 1.1 kW motor running at 1440 rpm drives a pinion with 16 teeth and a module of 5 mm. Find the tangential force Ft on the pinion teeth.

P = 1.1 kWn = 1440 rpmN1 = 16m = 5 mm
Ft = N
16.Gears & gear trainsHard
A = 20B = 24C = 12D = 18

In a compound gear train, gear A (20 teeth) on the input shaft turning at 1500 rpm drives gear B (24 teeth). Gear C (12 teeth) is fixed to the same shaft as B and drives gear D (18 teeth) on the output shaft. Find the output speed nout.

nin = 1500 rpmA = 20B = 24C = 12D = 18
nout = rpm
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 2.2 s? Use g = 9.81 m/s². Find L.

T = 2.2 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
1.7 kgk = 200 N/mA = 10 cm

A 1.7 kg mass on a spring with k = 200 N/m is pulled 10 cm from equilibrium and released. Find its maximum acceleration amax.

m = 1.7 kgk = 200 N/mA = 10 cm
amax = m/s²
19.Mechanical vibrationsMedium
k = 50 kN/mζ = 0.3m = 8 kg

An 8 kg mass on a spring with a stiffness of 50 kN/m has a viscous damper giving a damping ratio of 0.3. Find the damped natural frequency fd of its free vibration in Hz.

m = 8 kgk = 50 kN/mζ = 0.3
fd = Hz
20.Mechanical vibrationsHard
k1​ = 12k2​ = 12m = 5 kg

A 5 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 12 kN/m and the lower one k₂ = 12 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 12 kN/mk2 = 12 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 124.2 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 100/3.6 = 27.78 m/s

Reaction distance

d1 = v₀·tr = 27.78·1 = 27.78 m

Braking distance

d2 = v₀²/(2a) = 27.78²/(2·4) = 96.45 m

Total

d = 27.78 + 96.45 = 124.2 m

Answer

d = 124.2 m
2.Kinematics

Answer: t = 5.078 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−30 = 19·t − ½·9.81·t²
4.905·t² − 19·t − 30 = 0

Solve the quadratic

Only the positive root is physical.

t = (19 + √(19² + 2·9.81·30))/9.81 = 5.078 s

Answer

t = 5.078 s
3.Newton’s laws

Answer: a = 2.34 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Normal force

N = m·g − F·sin θ = 98.1 − 40·sin 40° = 72.39 N

Horizontal forces

m·a = F·cos θ − μ·N = 30.64 − 7.239
a = 23.4/10 = 2.34 m/s²

Answer

a = 2.34 m/s²
4.Newton’s laws

Answer: a = 0.8514 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 88.29 N
m₁·g·sin θ = 53.45 N
μ·m₁·g·cos θ = 19.09 N

Acceleration of the system

a = (88.29 − 53.45 − 19.09)/18.5 = 0.8514 m/s²

Answer

a = 0.8514 m/s²
5.Projectile motion

Answer: θ = 30.27 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·60/26² = 0.8707

Angle

2θ = 60.54° → θ = 30.27°

Answer

θ = 30.27°

The other solution is 90° − θ = 59.73°.

6.Projectile motion

Answer: t = 5.087 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 22·cos 40° = 16.85 m/s
vy = v0·sin θ = 22·sin 40° = 14.14 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 55 + 14.14·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (14.14 + √(200 + 1079))/9.81 = 5.087 s

Answer

t = 5.087 s
7.Circular motion

Answer: v = 0.9884 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Radius of the circle

r = L·sin θ = 0.8·sin 20° = 0.2736 m

Speed

Tension and gravity together give the inward force: tan θ = v²/(r·g).

v = √(r·g·tan θ) = √(0.2736·9.81·tan 20°) = 0.9884 m/s

Answer

v = 0.9884 m/s
8.Circular motion

Answer: T = 31.85 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 0.6·9.81 + 0.6·7.5²/1.3 = 5.886 + 25.96 = 31.85 N

Answer

T = 31.85 N
9.Work & energy

Answer: Wf = 45.09 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 98.1·0.766 = 75.15 N
F = μN = 0.2·75.15 = 15.03 N

Work against friction

Wf = F·d = 15.03·3 = 45.09 J

Answer

Wf = 45.09 J
10.Work & energy

Answer: x = 12.53 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 9.81·(4.5 − 0.1·5) = 39.24 J

Maximum compression

½kx² = 39.24 → x = √(2·39.24/5000) = 0.1253 m = 12.53 cm

Answer

x = 12.53 cm
11.Momentum & collisions

Answer: v = 497.2 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.2) = 1.981 m/s

Collision

m·v = (m + M)·V → v = (0.012 + 3)·1.981/0.012 = 497.2 m/s

Answer

v = 497.2 m/s
12.Momentum & collisions

Answer: Favg = 216 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.3·(7 + 11) = 5.4 N·s

Average force

Favg = J/Δt = 5.4/0.025 = 216 N

Answer

Favg = 216 N
13.Rigid-body rotation

Answer: R = 36.79 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.9) = 5.074 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 15·(9.81 − 7.357) = 36.79 N

Answer

R = 36.79 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: ω = 1.855 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 7·2²/3 + 0.02·1.5² = 9.378 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.02·580·1.5/9.378 = 1.855 rad/s

Answer

ω = 1.855 rad/s
15.Gears & gear trains

Answer: Ft = 182.4 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·1440/60 = 150.8 rad/s
T = P/ω = 1100/150.8 = 7.295 N·m

Pitch diameter

d = m·N = 5·16 = 80 mm

Tangential force

Ft = 2T/d = 2·7.295/0.08 = 182.4 N

Answer

Ft = 182.4 N
16.Gears & gear trains

Answer: nout = 833.3 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1500·20/24 = 1250 rpm = nC

Second stage

nout = 1250·12/18 = 833.3 rpm

Answer

nout = 833.3 rpm

total ratio = 1.8 : 1

17.Springs & pendulums

Answer: L = 1.203 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(2.2/2π)² = 1.203 m

Answer

L = 1.203 m
18.Springs & pendulums

Answer: amax = 11.76 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(200/1.7) = 10.85 rad/s

Maximum acceleration

amax = A·ω² = 0.1·10.85² = 11.76 m/s²

Answer

amax = 11.76 m/s²
19.Mechanical vibrations

Answer: fd = 12 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(50000/8) = 79.06 rad/s
fn = 79.06/(2π) = 12.58 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 12.58·√(1 − 0.3²) = 12 Hz

Answer

fd = 12 Hz
20.Mechanical vibrations

Answer: fn = 5.513 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/12 + 1/12 → keq = 12·12/(12 + 12) = 6 kN/m

Natural frequency

ωn = √(6000/5) = 34.64 rad/s
fn = 34.64/(2π) = 5.513 Hz

Answer

fn = 5.513 Hz

ExamProblems · examproblems.com/courses/dynamics