In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 72 km/h brakes with a constant deceleration of 5.5 m/s² until it stops. How long does braking take? Find t.
v₀ = 72 km/ha = −5.5 m/s²v = 0
t = s
2.KinematicsHard
A ball is thrown straight up at 12 m/s from the edge of a roof 20 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 12 m/sh₀ = 20 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 5 kg block slides down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 5 kgθ = 35°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
An 8 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 8 kgm2 = 5 kgμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 45° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.
v0 = 26 m/sθ = 45°g = 9.81 m/s²
H = m
6.Projectile motionHard
A ball is launched at 17 m/s and 60° above the horizontal from the top of a 10 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?
v₀ = 17 m/sθ = 60°h = 10 mg = 9.81 m/s²
α = °
7.Circular motionMedium
A small ball on a string of length 1.6 m moves in a horizontal circle so that the string makes a constant angle of 50° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the speed v of the ball.
L = 1.6 mθ = 50°g = 9.81 m/s²
v = m/s
8.Circular motionHard
A ball on a string 0.9 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?
r = 0.9 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
A 1200 kg car drives up a 2° slope at a constant 72 km/h. Air resistance and rolling resistance together amount to 700 N. Find the power P the wheels must deliver, in kW.
A spring of stiffness 3000 N/m at the bottom of a 25° slope is compressed by 20 cm against a 1 kg block and released. The coefficient of kinetic friction between block and slope is 0.1. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)
A 500 kg car moving at 22 m/s runs into a stationary 1700 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?
m1 = 500 kgv1 = 22 m/sm2 = 1700 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
At a crossing a 1100 kg car travelling east at 12 m/s collides with a 1000 kg car travelling north at 10 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.
m1 = 1100 kgv1 = 12 m/s (E)m2 = 1000 kgv2 = 10 m/s (N)
v′ = m/s
13.Rigid-body rotationMedium
A flywheel with a moment of inertia of 33 kg·m² spins at 3000 rpm. A brake applies a constant friction torque of 100 N·m. How many revolutions N does the flywheel make before it stops?
I = 33 kg·m²n = 3000 rpmTb = 100 N·m
N = rev
14.Rigid-body rotationHard
A solid cylinder starts from rest and rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 6 m along the slope.
θ = 20°s = 6 mI = ½·m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
A 1.5 kW motor running at 1440 rpm drives a pinion with 16 teeth, which meshes with a gear with 32 teeth. The gear pair has an efficiency of 97%. Find the torque T1 on the motor shaft.
P = 1.5 kWn1 = 1440 rpmN1 = 16N2 = 32η = 97%
T1 = N·m
16.Gears & gear trainsHard
In a compound gear train, gear A (18 teeth) on the input shaft turns at 3000 rpm and drives gear B (50 teeth). Gear C (25 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 750 rpm. How many teeth ND must gear D have?
nin = 3000 rpmA = 18B = 50C = 25nout = 750 rpm
ND =
17.Springs & pendulumsMedium
A 2.2 kg mass on a spring with k = 230 N/m is pulled 11 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 0.5 s (with sign).
m = 2.2 kgk = 230 N/mA = 11 cmt = 0.5 s
x = cm
18.Springs & pendulumsHard
A 1.5 kg mass on a spring with k = 500 N/m is pulled 4 cm from equilibrium and released. Find the total energy E of the oscillation.
m = 1.5 kgk = 500 N/mA = 4 cm
E = J
19.Mechanical vibrationsMedium
In a free-vibration test of a damped mass–spring system, a displacement peak of 40 mm is followed one cycle later by a peak of 18.7 mm. Find the damping ratio ζ.
x0 = 40 mmx1 = 18.7 mmn = 1
ζ =
20.Mechanical vibrationsHard
A 100 kg mass hangs from spring k₃ = 10 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 25 kN/m and k₂ = 12 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.
m = 100 kgk1 = 25 kN/mk2 = 12 kN/mk3 = 10 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: t = 3.636 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 72/3.6 = 20 m/s
Braking time
0 = v₀ − a·t → t = v₀/a = 20/5.5 = 3.636 s
Answer
t = 3.636 s
2.Kinematics
Answer: t = 3.584 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−20 = 12·t − ½·9.81·t²
4.905·t² − 12·t − 20 = 0
Solve the quadratic
Only the positive root is physical.
t = (12 + √(12² + 2·9.81·20))/9.81 = 3.584 s
Answer
t = 3.584 s
3.Newton’s laws
Answer: a = 4.823 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 26·cos 45° = 18.38 m/s
vy = v0·sin θ = 26·sin 45° = 18.38 m/s
Highest point
At the top the vertical velocity is zero: vy² = 2gH.
H = vy²/(2g) = 18.38²/(2·9.81) = 17.23 m
Answer
H = 17.23 m
6.Projectile motion
Answer: α = 67.3 °
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 17·cos 60° = 8.5 m/s
vy0 = 17·sin 60° = 14.72 m/s
Vertical speed at impact
Energy or v² = v₀² + 2as in the vertical direction.
vy = √(14.72² + 2·9.81·10) = 20.32 m/s
Impact angle
tan α = vy/vx = 20.32/8.5 → α = 67.3°
Answer
α = 67.3°
7.Circular motion
Answer: v = 3.785 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Radius of the circle
r = L·sin θ = 1.6·sin 50° = 1.226 m
Speed
Tension and gravity together give the inward force: tan θ = v²/(r·g).
v = √(r·g·tan θ) = √(1.226·9.81·tan 50°) = 3.785 m/s
Answer
v = 3.785 m/s
8.Circular motion
Answer: vmin = 2.971 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Tension zero at the top
m·g = m·v²/r → v = √(g·r) = √(9.81·0.9) = 2.971 m/s
Answer
vmin = 2.971 m/s
9.Work & energy
Answer: P = 22.22 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 1200·9.81 = 11772 N
mg·sin θ = 11772·sin 2° = 410.8 N
F = 410.8 + 700 = 1111 N
Power
v = 72/3.6 = 20 m/s
P = F·v = 1111·20 = 22217 W = 22.22 kW
Answer
P = 22.22 kW
10.Work & energy
Answer: d = 11.92 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Spring energy
x = 20 cm = 0.2 m
½kx² = ½·3000·0.2² = 60 J
Energy balance along the slope
m·g = 1·9.81 = 9.81 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 60/(9.81·(0.4226 + 0.1·0.9063)) = 11.92 m
Answer
d = 11.92 m
11.Momentum & collisions
Answer: ΔK = 93500 J
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 500·22/2200 = 5 m/s
Kinetic energy before and after
Kbefore = ½·500·22² = 121000 J
Kafter = ½·2200·5² = 27500 J
Energy lost
ΔK = 121000 − 27500 = 93500 J
Answer
ΔK = 93500 J
The lost energy goes into deformation, heat and sound.
12.Momentum & collisions
Answer: v′ = 7.886 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·3000/60 = 314.2 rad/s
Work of the brake equals the kinetic energy
½·I·ω² = ½·33·314.2² = 1.628 × 10⁶ J
θ = 1.628 × 10⁶/100 = 16285 rad
Revolutions
N = θ/2π = 2592 rev
Answer
N = 2592 rev
14.Rigid-body rotation
Answer: v = 5.181 m/s
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Height dropped
h = s·sin θ = 6·sin 20° = 2.052 m
Energy balance with rolling
Rolling without slipping: ω = v/r, and friction does no work at the contact point.
m·g·h = ½·m·v²·(1 + 0.5)
v = √(2·9.81·2.052/1.5) = 5.181 m/s
Answer
v = 5.181 m/s
15.Gears & gear trains
Answer: T1 = 9.947 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Motor torque
ω₁ = 2π·1440/60 = 150.8 rad/s
T1 = P/ω₁ = 1500/150.8 = 9.947 N·m
Answer
T1 = 9.947 N·m
16.Gears & gear trains
Answer: ND = 36
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Intermediate shaft speed
nB = nC = 3000·18/50 = 1080 rpm
Teeth on gear D
ND = C·nC/nout = 25·1080/750 = 36
Answer
ND = 36
17.Springs & pendulums
Answer: x = 4.283 cm
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(230/2.2) = 10.22 rad/s
ω·t = 10.22·0.5 = 5.112 rad
Displacement
x = A·cos(ω·t) = 11·cos(5.112) = 4.283 cm
Answer
x = 4.283 cm
18.Springs & pendulums
Answer: E = 0.4 J
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(500/1.5) = 18.26 rad/s
Energy
E = ½·k·A² = ½·500·0.04² = 0.4 J
Answer
E = 0.4 J
19.Mechanical vibrations
Answer: ζ = 0.1201
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.