In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A plane starts from rest and accelerates uniformly at 1.5 m/s² along a runway. Find its speed v after 1100 m.
v₀ = 0a = 1.5 m/s²s = 1100 m
v = m/s
2.KinematicsHard
A ball is thrown straight up at 13 m/s from the edge of a roof 20 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 13 m/sh₀ = 20 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 17 kg block slides down a frictionless slope at 40° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 17 kgθ = 40°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 80 N pulls the front 1 kg block; the 3 kg block is towed behind. The coefficient of kinetic friction is 0.15 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.
m1 = 3 kgm2 = 1 kgF = 80 Nμ = 0.15g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched from level ground at 38 m/s and must land 120 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.
v₀ = 38 m/sR = 120 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
A ball is launched at 15° above horizontal from the top of a 60 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 29 m/sθ = 15°h = 60 mg = 9.81 m/s²
t = s
7.Circular motionMedium
A car takes a flat curve of radius 130 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 130 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A ball on a string 0.8 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?
r = 0.8 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
A block slides from rest down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.2. Find its speed v after it has slid 7 m along the slope.
θ = 40°μ = 0.2d = 7 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
A spring of stiffness 1000 N/m at the bottom of a 35° slope is compressed by 10 cm against a 2 kg block and released. The coefficient of kinetic friction between block and slope is 0.1. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)
A 10 kg projectile moving horizontally at 9 m/s explodes into two fragments that move along the same line. The 4 kg fragment continues forwards at 40 m/s. Find the velocity v′2 of the 6 kg fragment (positive in the original direction).
M = 10 kgu = 9 m/sm1 = 4 kgv′1 = 40 m/sm2 = 6 kg
v′2 = m/s
12.Momentum & collisionsHard
A 0.4 kg ball hits a wall at 13 m/s and bounces straight back at 13 m/s. The contact lasts 10 ms. Find the average force Favg of the wall on the ball.
m = 0.4 kgvin = 13 m/svout = 13 m/sΔt = 10 ms
Favg = N
13.Rigid-body rotationMedium
A uniform slender rod of mass 12 kg and length 1 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the acceleration atip of the free end just after release.
m = 12 kgL = 1 mg = 9.81 m/s²
atip = m/s²
14.Rigid-body rotationHard
A solid sphere of mass 14.5 kg rolls without slipping at 8 m/s. What percentage p of its total kinetic energy is rotational?
m = 14.5 kgv = 8 m/sI = (2/5)·m·r²
p = %
15.Gears & gear trainsMedium
A 1.1 kW motor running at 1450 rpm drives a pinion with 25 teeth and a module of 5 mm. Find the tangential force Ft on the pinion teeth.
P = 1.1 kWn = 1450 rpmN1 = 25m = 5 mm
Ft = N
16.Gears & gear trainsHard
An open belt connects a 125 mm pulley and a 315 mm pulley whose centres are 1000 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.
d1 = 125 mmd2 = 315 mmC = 1000 mm
θ = °
17.Springs & pendulumsMedium
An astronaut on another planet finds that a simple pendulum 1.2 m long has a period of 1.38 s for small swings. Find the gravitational acceleration g on that planet.
L = 1.2 mT = 1.38 s
g = m/s²
18.Springs & pendulumsHard
A 2.6 kg mass is attached to the lower end of an unstretched vertical spring with k = 260 N/m and released from rest. Use g = 9.81 m/s². Find the greatest speed vmax of the mass.
m = 2.6 kgk = 260 N/mg = 9.81 m/s²
vmax = m/s
19.Mechanical vibrationsMedium
A 150 kg mass is supported by a spring with a stiffness of 50 kN/m and a viscous damper with a damping coefficient of 2190 N·s/m. Find the damping ratio ζ.
m = 150 kgk = 50 kN/mc = 2190 N·s/m
ζ =
20.Mechanical vibrationsHard
A 25 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 30 kN/m and k₂ = 10 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 25 kgk1 = 30 kN/mk2 = 10 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: v = 57.45 m/s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Speed after the distance
v = √(2·a·s) = √(2·1.5·1100) = 57.45 m/s
Answer
v = 57.45 m/s
(206.8 km/h)
2.Kinematics
Answer: t = 3.74 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−20 = 13·t − ½·9.81·t²
4.905·t² − 13·t − 20 = 0
Solve the quadratic
Only the positive root is physical.
t = (13 + √(13² + 2·9.81·20))/9.81 = 3.74 s
Answer
t = 3.74 s
3.Newton’s laws
Answer: a = 6.306 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).
5.Projectile motion
Answer: θ = 27.31 °
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Range formula
R = v₀²·sin 2θ/g → sin 2θ = 9.81·120/38² = 0.8152
Angle
2θ = 54.61° → θ = 27.31°
Answer
θ = 27.31°
The other solution is 90° − θ = 62.69°.
6.Projectile motion
Answer: t = 4.345 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 29·cos 15° = 28.01 m/s
vy = v0·sin θ = 29·sin 15° = 7.506 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 60 + 7.506·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (7.506 + √(56.34 + 1177))/9.81 = 4.345 s
Answer
t = 4.345 s
7.Circular motion
Answer: vmax = 29.88 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·130) = 29.88 m/s
Answer
vmax = 29.88 m/s (107.6 km/h)
8.Circular motion
Answer: vmin = 2.801 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Tension zero at the top
m·g = m·v²/r → v = √(g·r) = √(9.81·0.8) = 2.801 m/s
Answer
vmin = 2.801 m/s
9.Work & energy
Answer: v = 8.2 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·7·(0.6428 − 0.2·0.766)) = 8.2 m/s
Answer
v = 8.2 m/s
10.Work & energy
Answer: d = 0.3888 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Spring energy
x = 10 cm = 0.1 m
½kx² = ½·1000·0.1² = 5 J
Energy balance along the slope
m·g = 2·9.81 = 19.62 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 5/(19.62·(0.5736 + 0.1·0.8192)) = 0.3888 m
Answer
d = 0.3888 m
11.Momentum & collisions
Answer: v′2 = −11.67 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum before
p = M·u = 10·9 = 90 kg·m/s
Momentum after
90 = 4·40 + 6·v′2
v′2 = (90 − 160)/6 = −11.67 m/s
Answer
v′2 = −11.67 m/s
The minus sign means the second fragment flies backwards.
12.Momentum & collisions
Answer: Favg = 1040 N
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.4·(13 + 13) = 10.4 N·s
Average force
Favg = J/Δt = 10.4/0.01 = 1040 N
Answer
Favg = 1040 N
13.Rigid-body rotation
Answer: atip = 14.71 m/s²
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Moments about the pin
At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.
atip = 1.5·g for any length: the free end falls faster than a dropped stone.
14.Rigid-body rotation
Answer: p = 28.57 %
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
The share depends only on the shape, not on the mass or the speed.
15.Gears & gear trains
Answer: Ft = 115.9 N
Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.
Torque on the pinion
ω = 2π·1450/60 = 151.8 rad/s
T = P/ω = 1100/151.8 = 7.244 N·m
Pitch diameter
d = m·N = 5·25 = 125 mm
Tangential force
Ft = 2T/d = 2·7.244/0.125 = 115.9 N
Answer
Ft = 115.9 N
16.Gears & gear trains
Answer: θ = 169.1 °
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt angle
asin(0.095) = 5.451°
Angle of wrap
θ = 180 − 2·5.451 = 169.1°
Answer
θ = 169.1°
17.Springs & pendulums
Answer: g = 24.88 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for g
g = 4π²·L/T² = 4π²·1.2/1.38² = 24.88 m/s²
Answer
g = 24.88 m/s²
18.Springs & pendulums
Answer: vmax = 0.981 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Equilibrium and amplitude
x₀ = m·g/k = 2.6·9.81/260 = 0.0981 m = A
Greatest speed
The speed is largest at equilibrium.
ω = √(260/2.6) = 10 rad/s
vmax = A·ω = 0.0981·10 = 0.981 m/s
Answer
vmax = 0.981 m/s
19.Mechanical vibrations
Answer: ζ = 0.3998
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(50000·150) = 5477 N·s/m
Damping ratio
ζ = c/cc = 2190/5477 = 0.3998
Answer
ζ = 0.3998
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 6.366 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.