Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)5.556 s33.33

A car driving at 120 km/h brakes with a constant deceleration of 6 m/s² until it stops. Find the braking distance s.

v₀ = 120 km/ha = −6 m/s²v = 0
s = m
2.KinematicsHard
a = 32 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 32 m/s² for 1.5 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². How long after launch does it hit the ground? Find t.

a = 32 m/s²t1 = 1.5 sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
30 kg40°F = 180 Nμ = 0.2

A 30 kg sled is pulled across level snow by a rope at 40° above the horizontal with a force of 180 N. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the sled.

m = 30 kgF = 180 Nθ = 40°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 20°blockv₀ = 10 m/s

A block is given a push so that it starts sliding up a ramp at 20° with a speed of 10 m/s. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 10 m/sθ = 20°μ = 0.15g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 22 m/s60°rangeH = ?

A ball is launched at 60° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 22 m/sθ = 60°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 10 mv0​ = 19 m/s45°x = ?

A ball is launched at 45° above horizontal from the top of a 10 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 19 m/sθ = 45°h = 10 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 85 m20 m/s

A 1800 kg car drives over the top of a hump in the road at 20 m/s. The top of the hump is a circular arc of radius 85 m. Use g = 9.81 m/s². Find the normal force N of the road on the car at the top.

m = 1800 kgv = 20 m/sr = 85 mg = 9.81 m/s²
N = N
8.Circular motionHard
r = 0.6 mv = ?

A ball on a string 0.6 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 0.6 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
100 km/h

A car travelling at 100 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.7. Find the stopping distance d.

v = 100 km/hμ = 0.7g = 9.81 m/s²
d = m
10.Work & energyHard
h = 4 mL = 1.5 mμ = 0.3k = 500 N/m

A 4 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.3) and then runs onto a spring (k = 500 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 4 kgh = 4 mL = 1.5 mμ = 0.3k = 500 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
800 kg12 m/s600 kg

An 800 kg car moving at 12 m/s runs into a stationary 600 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?

m1 = 800 kgv1 = 12 m/sm2 = 600 kgv2 = 0
ΔK/K = %
12.Momentum & collisionsHard
900 kgv1​ = ?2000 kg

A 900 kg car runs into a parked 2000 kg car. The wrecks lock together and skid 11.5 m before stopping. The coefficient of kinetic friction between tyres and road is 0.75. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 900 kgm2 = 2000 kgd = 11.5 mμ = 0.75g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
15 kgaαM = 14.5 kgR = 0.25 m

A 15 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 14.5 kg and radius 0.25 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the tension T in the cord.

m = 15 kgM = 14.5 kgR = 0.25 mg = 9.81 m/s²
T = N
14.Rigid-body rotationHard
θ = 20°a

A hollow sphere rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². Find the smallest coefficient of static friction μs that prevents it from slipping.

θ = 20°I = (2/3)·m·r²g = 9.81 m/s²
μs =
15.Gears & gear trainsMedium
Tw​ = ?z = 3, 960 rpm

A 0.37 kW motor at 960 rpm drives a worm with 3 start(s). The worm wheel has 80 teeth and the drive has an efficiency of 85%. Find the output torque Tw on the wheel shaft.

z = 3Nw = 80n = 960 rpmP = 0.37 kWη = 85%
Tw = N·m
16.Gears & gear trainsHard
A = 25B = 72C = 25D = ?

In a compound gear train, gear A (25 teeth) on the input shaft turns at 2880 rpm and drives gear B (72 teeth). Gear C (25 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 500 rpm. How many teeth ND must gear D have?

nin = 2880 rpmA = 25B = 72C = 25nout = 500 rpm
ND =
17.Springs & pendulumsMedium
L = 2.7 m

A simple pendulum has a length of 2.7 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 2.7 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
1.9 kgk = 230 N/mA = 20 cm

A 1.9 kg mass on a spring with k = 230 N/m is pulled 20 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 1.9 kgk = 230 N/mA = 20 cm
E = J
19.Mechanical vibrationsMedium
k = 20 kN/mζ = 0.7m = 12 kg

A 12 kg mass on a spring with a stiffness of 20 kN/m has a viscous damper giving a damping ratio of 0.7. Find the damped natural frequency fd of its free vibration in Hz.

m = 12 kgk = 20 kN/mζ = 0.7
fd = Hz
20.Mechanical vibrationsHard
k1​ = 12k2​ = 20m = 40 kg

A 40 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 12 kN/m and k₂ = 20 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 40 kgk1 = 12 kN/mk2 = 20 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: s = 92.59 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 120/3.6 = 33.33 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 33.33²/(2·6) = 92.59 m

Answer

s = 92.59 m
2.Kinematics

Answer: t = 11.99 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 32·1.5 = 48 m/s
h₁ = ½·32·1.5² = 36 m

Free flight to the ground

Solve −h₁ = v₁·t₂ − ½·g·t₂² for the positive root.

t₂ = (48 + √(48² + 2·9.81·36))/9.81 = 10.49 s
t = 1.5 + 10.49 = 11.99 s

Answer

t = 11.99 s
3.Newton’s laws

Answer: a = 3.406 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Normal force

N = m·g − F·sin θ = 294.3 − 180·sin 40° = 178.6 N

Horizontal forces

m·a = F·cos θ − μ·N = 137.9 − 35.72
a = 102.2/30 = 3.406 m/s²

Answer

a = 3.406 m/s²
4.Newton’s laws

Answer: d = 10.55 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 20° + 0.15·cos 20°) = 4.738 m/s²

Distance

d = v₀²/(2a) = 10²/(2·4.738) = 10.55 m

Answer

d = 10.55 m
5.Projectile motion

Answer: H = 18.5 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 22·cos 60° = 11 m/s
vy = v0·sin θ = 22·sin 60° = 19.05 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 19.05²/(2·9.81) = 18.5 m

Answer

H = 18.5 m
6.Projectile motion

Answer: x = 44.98 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 19·cos 45° = 13.44 m/s
vy = v0·sin θ = 19·sin 45° = 13.44 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 10 + 13.44·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (13.44 + √(180.5 + 196.2))/9.81 = 3.348 s

Horizontal distance

x = vx·t = 13.44·3.348 = 44.98 m

Answer

x = 44.98 m
7.Circular motion

Answer: N = 9187 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the top

Towards the centre (down) is positive.

m·g − N = m·v²/r
N = 1800·9.81 − 1800·20²/85 = 17658 − 8471 = 9187 N

Answer

N = 9187 N

The car feels lighter: the road pushes up less than its weight.

8.Circular motion

Answer: vmin = 2.426 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·0.6) = 2.426 m/s

Answer

vmin = 2.426 m/s
9.Work & energy

Answer: d = 56.18 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Speed in base units

v = 100/3.6 = 27.78 m/s

Energy balance

½mv² = μmg·d → d = v²/(2μg) = 27.78²/(2·0.7·9.81) = 56.18 m

Answer

d = 56.18 m

Doubling the speed makes the stopping distance four times longer.

10.Work & energy

Answer: x = 74.65 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 39.24·(4 − 0.3·1.5) = 139.3 J

Maximum compression

½kx² = 139.3 → x = √(2·139.3/500) = 0.7465 m = 74.65 cm

Answer

x = 74.65 cm
11.Momentum & collisions

Answer: ΔK/K = 42.86 %

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 800·12/1400 = 6.857 m/s

Kinetic energy before and after

Kbefore = ½·800·12² = 57600 J
Kafter = ½·1400·6.857² = 32914 J

Fraction lost

ΔK/K = 24686/57600 = 42.86 %

Answer

ΔK/K = 42.86 %

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: v1 = 41.92 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.75·9.81·11.5) = 13.01 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 2900·13.01/900 = 41.92 m/s

Answer

v1 = 41.92 m/s
(150.9 km/h)
13.Rigid-body rotation

Answer: T = 47.95 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Block and pulley

block: m·g − T = m·a
pulley: T·R = I·α = ½·M·R²·(a/R) → T = ½·M·a

Acceleration

a = m·g/(m + M/2) = 15·9.81/(15 + 7.25) = 6.613 m/s²

Tension

T = m·(g − a) = 15·(9.81 − 6.613) = 47.95 N

Answer

T = 47.95 N
14.Rigid-body rotation

Answer: μs = 0.1456

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.6667·m·r²·(a/r) → f = 0.6667·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 20°/1.667 = 2.013 m/s²

Friction needed

f = c·m·a ≤ μ·m·g·cos θ → μ ≥ c·tan θ/(1 + c)
μs = 0.6667·tan 20°/1.667 = 0.1456

Answer

μs = 0.1456
15.Gears & gear trains

Answer: Tw = 83.42 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 960·3/80 = 36 rpm

Output torque

ωw = 2π·36/60 = 3.77 rad/s
Tw = η·P/ωw = 0.85·370/3.77 = 83.42 N·m

Answer

Tw = 83.42 N·m
16.Gears & gear trains

Answer: ND = 50

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 2880·25/72 = 1000 rpm

Teeth on gear D

ND = C·nC/nout = 25·1000/500 = 50

Answer

ND = 50
17.Springs & pendulums

Answer: T = 3.296 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(2.7/9.81) = 3.296 s

Answer

T = 3.296 s
18.Springs & pendulums

Answer: E = 4.6 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(230/1.9) = 11 rad/s

Energy

E = ½·k·A² = ½·230·0.2² = 4.6 J

Answer

E = 4.6 J
19.Mechanical vibrations

Answer: fd = 4.64 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(20000/12) = 40.82 rad/s
fn = 40.82/(2π) = 6.497 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 6.497·√(1 − 0.7²) = 4.64 Hz

Answer

fd = 4.64 Hz
20.Mechanical vibrations

Answer: keq = 32 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 12 + 20 = 32 kN/m

Answer

keq = 32 kN/m

ExamProblems · examproblems.com/courses/dynamics