In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A plane starts from rest and accelerates uniformly at 1.75 m/s² along a runway. Find its speed v after 1500 m.
v₀ = 0a = 1.75 m/s²s = 1500 m
v = m/s
2.KinematicsHard
Ball A is dropped from rest from a height of 10 m. At the same instant ball B is thrown straight up from the ground directly below at 13 m/s. Ignore air resistance and use g = 9.81 m/s². When do the balls meet? Find t.
H = 10 mv0B = 13 m/sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 17 kg block slides down a frictionless slope at 45° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 17 kgθ = 45°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 85 N pulls the front 8 kg block; the 11 kg block is towed behind. The coefficient of kinetic friction is 0.15 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.
m1 = 11 kgm2 = 8 kgF = 85 Nμ = 0.15g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 20° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.
v0 = 30 m/sθ = 20°g = 9.81 m/s²
H = m
6.Projectile motionHard
A ball is launched at 40° above horizontal from the top of a 25 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 27 m/sθ = 40°h = 25 mg = 9.81 m/s²
x = m
7.Circular motionMedium
A small ball on a string of length 1.5 m moves in a horizontal circle so that the string makes a constant angle of 40° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the speed v of the ball.
L = 1.5 mθ = 40°g = 9.81 m/s²
v = m/s
8.Circular motionHard
A 0.3 kg ball on a string 0.8 m long is swung in a vertical circle. At the lowest point it moves at 6 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 0.3 kgr = 0.8 mv = 6 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
A 5 kg ball hangs on a light string of length 3 m. It is pulled aside until the string makes 40° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.
m = 5 kgL = 3 mθ = 40°g = 9.81 m/s²
T = N
10.Work & energyHard
A 0.5 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4 m long (μ = 0.3) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.
m = 0.5 kgh = 4 mL = 4 mμ = 0.3k = 1000 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
A 20 g bullet is fired horizontally into a 4.5 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 7 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 20 gM = 4.5 kgh = 7 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
A 1000 kg car runs into a parked 1700 kg car. The wrecks lock together and skid 6 m before stopping. The coefficient of kinetic friction between tyres and road is 0.75. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.
A flywheel with a moment of inertia of 28.5 kg·m² spins at 1900 rpm. A brake applies a constant friction torque of 10 N·m. How long t does it take to stop?
I = 28.5 kg·m²n = 1900 rpmTb = 10 N·m
t = s
14.Rigid-body rotationHard
A uniform solid disc (mass 30 kg, radius 0.3 m) spins freely at 600 rpm about a vertical frictionless shaft. A thin ring of mass 19 kg and the same radius is dropped onto it from rest, centred on the shaft, and the two quickly spin together. Find their common speed n2 in rpm.
Mdisc = 30 kgMring = 19 kgR = 0.3 mn1 = 600 rpm
n2 = rpm
15.Gears & gear trainsMedium
A 1.5 kW motor at 1450 rpm drives a worm with 2 start(s). The worm wheel has 80 teeth and the drive has an efficiency of 60%. Find the output torque Tw on the wheel shaft.
z = 2Nw = 80n = 1450 rpmP = 1.5 kWη = 60%
Tw = N·m
16.Gears & gear trainsHard
In a compound gear train, gear A (16 teeth) on the input shaft turning at 960 rpm drives gear B (60 teeth). Gear C (15 teeth) is fixed to the same shaft as B and drives gear D (48 teeth) on the output shaft. Find the output speed nout.
nin = 960 rpmA = 16B = 60C = 15D = 48
nout = rpm
17.Springs & pendulumsMedium
A 3.3 kg mass on a spring with k = 150 N/m oscillates on a frictionless surface with an amplitude of 5 cm. Find its speed v when it is 4 cm from equilibrium.
m = 3.3 kgk = 150 N/mA = 5 cmx = 4 cm
v = m/s
18.Springs & pendulumsHard
A 3.8 kg mass on a spring with k = 70 N/m is pulled 6 cm from equilibrium and released. Find its maximum acceleration amax.
m = 3.8 kgk = 70 N/mA = 6 cm
amax = m/s²
19.Mechanical vibrationsMedium
A 10 kg mass is supported by a spring with a stiffness of 50 kN/m and a viscous damper with a damping coefficient of 210 N·s/m. Find the damping ratio ζ.
m = 10 kgk = 50 kN/mc = 210 N·s/m
ζ =
20.Mechanical vibrationsHard
A 10 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 40 kN/m and k₂ = 20 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 10 kgk1 = 40 kN/mk2 = 20 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: v = 72.46 m/s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Speed after the distance
v = √(2·a·s) = √(2·1.75·1500) = 72.46 m/s
Answer
v = 72.46 m/s
(260.8 km/h)
2.Kinematics
Answer: t = 0.7692 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Meeting time
Up is positive, the ground is y = 0.
10 − ½g·t² = 13·t − ½g·t² → t = 10/13 = 0.7692 s
Answer
t = 0.7692 s
3.Newton’s laws
Answer: a = 6.937 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).
5.Projectile motion
Answer: H = 5.366 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 30·cos 20° = 28.19 m/s
vy = v0·sin θ = 30·sin 20° = 10.26 m/s
Highest point
At the top the vertical velocity is zero: vy² = 2gH.
H = vy²/(2g) = 10.26²/(2·9.81) = 5.366 m
Answer
H = 5.366 m
6.Projectile motion
Answer: x = 95.92 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 27·cos 40° = 20.68 m/s
vy = v0·sin θ = 27·sin 40° = 17.36 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 25 + 17.36·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (17.36 + √(301.2 + 490.5))/9.81 = 4.637 s
Horizontal distance
x = vx·t = 20.68·4.637 = 95.92 m
Answer
x = 95.92 m
7.Circular motion
Answer: v = 2.817 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Radius of the circle
r = L·sin θ = 1.5·sin 40° = 0.9642 m
Speed
Tension and gravity together give the inward force: tan θ = v²/(r·g).
v = √(r·g·tan θ) = √(0.9642·9.81·tan 40°) = 2.817 m/s
Answer
v = 2.817 m/s
8.Circular motion
Answer: T = 16.44 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 0.3·9.81 + 0.3·6²/0.8 = 2.943 + 13.5 = 16.44 N
Answer
T = 16.44 N
9.Work & energy
Answer: T = 72 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the bottom
v² = 2gL(1 − cos θ) = 2·9.81·3·(1 − cos 40°) = 13.77 m²/s²
Forces at the bottom
m·g = 5·9.81 = 49.05 N
T = mg + mv²/L = 49.05 + 5·13.77/3 = 72 N
Answer
T = 72 N
Check: T = mg(3 − 2cos θ) = 72 N.
10.Work & energy
Answer: v = 7.412 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 4.905·(4 − 0.3·4) = 13.73 J
Speed at the spring
½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·2.8) = 7.412 m/s
Answer
v = 7.412 m/s
11.Momentum & collisions
Answer: v = 264.9 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Swing after impact
V = √(2·g·h) = √(2·9.81·0.07) = 1.172 m/s
Collision
m·v = (m + M)·V → v = (0.02 + 4.5)·1.172/0.02 = 264.9 m/s
Answer
v = 264.9 m/s
12.Momentum & collisions
Answer: v1 = 25.37 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·1900/60 = 199 rad/s
Deceleration and time
α = Tb/I = 10/28.5 = 0.3509 rad/s²
t = ω/α = 199/0.3509 = 567.1 s
Answer
t = 567.1 s
14.Rigid-body rotation
Answer: n2 = 264.7 rpm
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Moments of inertia
I1 = ½·30·0.3² = 1.35 kg·m²
I2 = 19·0.3² = 1.71 kg·m²
Conservation of angular momentum
n2 = n1·I1/(I1 + I2) = 600·1.35/3.06 = 264.7 rpm
Answer
n2 = 264.7 rpm
15.Gears & gear trains
Answer: Tw = 237.1 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Wheel speed
nw = n·z/Nw = 1450·2/80 = 36.25 rpm
Output torque
ωw = 2π·36.25/60 = 3.796 rad/s
Tw = η·P/ωw = 0.6·1500/3.796 = 237.1 N·m
Answer
Tw = 237.1 N·m
16.Gears & gear trains
Answer: nout = 80 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
First stage
nB = 960·16/60 = 256 rpm = nC
Second stage
nout = 256·15/48 = 80 rpm
Answer
nout = 80 rpm
total ratio = 12 : 1
17.Springs & pendulums
Answer: v = 0.2023 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(150/3.3) = 6.742 rad/s
Speed at x
v = ω·√(A² − x²) = 6.742·√(0.05² − 0.04²) = 0.2023 m/s
Answer
v = 0.2023 m/s
18.Springs & pendulums
Answer: amax = 1.105 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(70/3.8) = 4.292 rad/s
Maximum acceleration
amax = A·ω² = 0.06·4.292² = 1.105 m/s²
Answer
amax = 1.105 m/s²
19.Mechanical vibrations
Answer: ζ = 0.1485
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(50000·10) = 1414 N·s/m
Damping ratio
ζ = c/cc = 210/1414 = 0.1485
Answer
ζ = 0.1485
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 12.33 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.