Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 5 m/s²car34 m/s

A car speeding at a constant 34 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 5 m/s². How long does it take the police car to catch up? Find t.

vcar = 34 m/sapolice = 5 m/s²v0,police = 0
t = s
2.KinematicsHard
v₀ = 5 m/s25 m

A ball is thrown straight up at 5 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 5 m/sh₀ = 25 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 30°a = ?m = 2 kg

A 2 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 2 kgθ = 30°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
4 kg2 kgTF = 80 Nμ = 0.3

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 80 N pulls the front 2 kg block; the 4 kg block is towed behind. The coefficient of kinetic friction is 0.3 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 4 kgm2 = 2 kgF = 80 Nμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 32 m/s55°x = ?

A ball is launched at 55° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 32 m/sθ = 55°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 40 mv0​ = 17 m/s55°α = ?

A ball is launched at 17 m/s and 55° above the horizontal from the top of a 40 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?

v₀ = 17 m/sθ = 55°h = 40 mg = 9.81 m/s²
α = °
7.Circular motionMedium
r = 120 mvmax​ = ?

A car drives over the top of a hump in the road, which is a circular arc of radius 120 m. Use g = 9.81 m/s². Above what speed vmax do the wheels leave the road at the top?

r = 120 mg = 9.81 m/s²
vmax = m/s
8.Circular motionHard
θ = 12°to centrevmin​ = ?

A curve of radius 240 m is banked at 12°, and the coefficient of static friction between tyres and road is 0.15. Use g = 9.81 m/s². Find the lowest speed vmin at which a car can take the curve without sliding down the bank.

r = 240 mθ = 12°μs = 0.15g = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
60°L = 1.5 m0.2 kg

A 0.2 kg ball hangs on a light string of length 1.5 m. It is pulled aside until the string makes 60° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.

m = 0.2 kgL = 1.5 mθ = 60°g = 9.81 m/s²
T = N
10.Work & energyHard
h = 3 mL = 2 mμ = 0.25k = 2000 N/m

A 0.5 kg block is released from rest at height 3 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2 m long (μ = 0.25) and then runs onto a spring (k = 2000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 0.5 kgh = 3 mL = 2 mμ = 0.25k = 2000 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
1.5 kgv = ?10 gh = 24 cm

A 10 g bullet is fired horizontally into a 1.5 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 24 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 10 gM = 1.5 kgh = 24 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
1100 kg12 m/s1100 kg9 m/sθ = ?

At a crossing a 1100 kg car travelling east at 12 m/s collides with a 1100 kg car travelling north at 9 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.

m1 = 1100 kgv1 = 12 m/s (E)m2 = 1100 kgv2 = 9 m/s (N)
θ = °
13.Rigid-body rotationMedium
L = 2.3 mm = 8.5 kgα

A uniform slender rod of mass 8.5 kg and length 2.3 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the acceleration atip of the free end just after release.

m = 8.5 kgL = 2.3 mg = 9.81 m/s²
atip = m/s²
14.Rigid-body rotationHard
140 m/s30 g0.36 mL = 0.9 m5 kgφ

A uniform slender rod of mass 5 kg and length 0.9 m hangs at rest from a frictionless pivot at its top end. A 30 g bullet moving horizontally at 140 m/s hits the rod 0.36 m below the pivot and stays embedded. Use g = 9.81 m/s². Find the largest angle φ from the vertical through which the rod swings.

M = 5 kgL = 0.9 mm = 30 gv = 140 m/sd = 0.36 mg = 9.81 m/s²
φ = °
15.Gears & gear trainsMedium
N1​ = 36N2​ = 48

A 4 kW motor running at 960 rpm drives a pinion with 36 teeth, which meshes with a gear with 48 teeth. The gear pair has an efficiency of 95%. Find the torque T1 on the motor shaft.

P = 4 kWn1 = 960 rpmN1 = 36N2 = 48η = 95%
T1 = N·m
16.Gears & gear trainsHard
A = 15B = 16C = 12D = 15

In a compound gear train, gear A (15 teeth) on the input shaft turning at 1500 rpm drives gear B (16 teeth). Gear C (12 teeth) is fixed to the same shaft as B and drives gear D (15 teeth) on the output shaft. Find the output speed nout.

nin = 1500 rpmA = 15B = 16C = 12D = 15
nout = rpm
17.Springs & pendulumsMedium
2.2 kgk = 410 N/mA = 18 cmx = 3 cm

A 2.2 kg mass on a spring with k = 410 N/m oscillates on a frictionless surface with an amplitude of 18 cm. Find its speed v when it is 3 cm from equilibrium.

m = 2.2 kgk = 410 N/mA = 18 cmx = 3 cm
v = m/s
18.Springs & pendulumsHard
t (s)x (cm)t = ?12.75

A body oscillates in simple harmonic motion with period 3.8 s and amplitude 17 cm. What is the shortest time t it needs to move from equilibrium to a displacement of 12.75 cm?

T = 3.8 sA = 17 cmx = 12.75 cm
t = s
19.Mechanical vibrationsMedium
k = 50 kN/mc = 380 N·s/mm = 2 kg

A 2 kg mass is supported by a spring with a stiffness of 50 kN/m and a viscous damper with a damping coefficient of 380 N·s/m. Find the damping ratio ζ.

m = 2 kgk = 50 kN/mc = 380 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 20k2​ = 10m = 25 kg

A 25 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 20 kN/m and the lower one k₂ = 10 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 20 kN/mk2 = 10 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 13.6 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·34/5 = 13.6 s

Answer

t = 13.6 s

At that moment the police car moves at 2v = 68 m/s.

2.Kinematics

Answer: t = 2.824 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−25 = 5·t − ½·9.81·t²
4.905·t² − 5·t − 25 = 0

Solve the quadratic

Only the positive root is physical.

t = (5 + √(5² + 2·9.81·25))/9.81 = 2.824 s

Answer

t = 2.824 s
3.Newton’s laws

Answer: a = 4.055 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 30° − 0.1·cos 30°) = 9.81·(0.5 − 0.0866) = 4.055 m/s²

Answer

a = 4.055 m/s²
4.Newton’s laws

Answer: T = 53.33 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (80 − 17.66)/6 = 10.39 m/s²

Rear block alone

T = m1·(a + μ·g) = 4·(10.39 + 2.943) = 53.33 N

Answer

T = 53.33 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: x = 98.09 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 32·cos 55° = 18.35 m/s
vy = v0·sin θ = 32·sin 55° = 26.21 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·26.21/9.81 = 5.344 s

Horizontal distance

x = vx·t = 18.35·5.344 = 98.09 m

Answer

x = 98.09 m
6.Projectile motion

Answer: α = 72.69 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 17·cos 55° = 9.751 m/s
vy0 = 17·sin 55° = 13.93 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(13.93² + 2·9.81·40) = 31.28 m/s

Impact angle

tan α = vy/vx = 31.28/9.751 → α = 72.69°

Answer

α = 72.69°
7.Circular motion

Answer: vmax = 34.31 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Normal force zero

m·g = m·v²/r → v = √(g·r) = √(9.81·120) = 34.31 m/s

Answer

vmax = 34.31 m/s
(123.5 km/h)
8.Circular motion

Answer: vmin = 11.95 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points up the slope.

N·(sin θ − μ·cos θ) = m·v²/r
N·(cos θ + μ·sin θ) = m·g

Speed

v = √(240·9.81·0.06119/1.009) = 11.95 m/s

Answer

vmin = 11.95 m/s
(43.01 km/h)
9.Work & energy

Answer: T = 3.924 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the bottom

v² = 2gL(1 − cos θ) = 2·9.81·1.5·(1 − cos 60°) = 14.71 m²/s²

Forces at the bottom

m·g = 0.2·9.81 = 1.962 N
T = mg + mv²/L = 1.962 + 0.2·14.71/1.5 = 3.924 N

Answer

T = 3.924 N

Check: T = mg(3 − 2cos θ) = 3.924 N.

10.Work & energy

Answer: v = 7.004 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 4.905·(3 − 0.25·2) = 12.26 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·2.5) = 7.004 m/s

Answer

v = 7.004 m/s
11.Momentum & collisions

Answer: v = 327.7 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.24) = 2.17 m/s

Collision

m·v = (m + M)·V → v = (0.01 + 1.5)·2.17/0.01 = 327.7 m/s

Answer

v = 327.7 m/s
12.Momentum & collisions

Answer: θ = 36.87 °

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1100·12 = 13200 kg·m/s
py = 1100·9 = 9900 kg·m/s

Direction

tan θ = py/px = 0.75 → θ = 36.87°

Answer

θ = 36.87°
13.Rigid-body rotation

Answer: atip = 14.71 m/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.3) = 6.398 rad/s²

Acceleration of the free end

atip = α·L = 6.398·2.3 = 14.71 m/s²

Answer

atip = 14.71 m/s²

atip = 1.5·g for any length: the free end falls faster than a dropped stone.

14.Rigid-body rotation

Answer: φ = 15.86 °

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 5·0.9²/3 + 0.03·0.36² = 1.354 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.03·140·0.36/1.354 = 1.117 rad/s

Energy during the swing

½·I·ω² = ½·1.354·1.117² = 0.8443 J
(M·g·L/2 + m·g·d)·(1 − cos φ) = 22.18·(1 − cos φ)
cos φ = 1 − 0.8443/22.18 = 0.9619 → φ = 15.86°

Answer

φ = 15.86°
15.Gears & gear trains

Answer: T1 = 39.79 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·960/60 = 100.5 rad/s
T1 = P/ω₁ = 4000/100.5 = 39.79 N·m

Answer

T1 = 39.79 N·m
16.Gears & gear trains

Answer: nout = 1125 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1500·15/16 = 1406 rpm = nC

Second stage

nout = 1406·12/15 = 1125 rpm

Answer

nout = 1125 rpm

total ratio = 1.333 : 1

17.Springs & pendulums

Answer: v = 2.423 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(410/2.2) = 13.65 rad/s

Speed at x

v = ω·√(A² − x²) = 13.65·√(0.18² − 0.03²) = 2.423 m/s

Answer

v = 2.423 m/s
18.Springs & pendulums

Answer: t = 0.5129 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = 2π/T = 2π/3.8 = 1.653 rad/s

Solve for the time

0.75 = sin(ω·t) → ω·t = arcsin(0.75) = 0.8481 rad
t = 0.8481/1.653 = 0.5129 s

Answer

t = 0.5129 s
19.Mechanical vibrations

Answer: ζ = 0.6008

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(50000·2) = 632.5 N·s/m

Damping ratio

ζ = c/cc = 380/632.5 = 0.6008

Answer

ζ = 0.6008

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 2.599 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/20 + 1/10 → keq = 20·10/(20 + 10) = 6.667 kN/m

Natural frequency

ωn = √(6667/25) = 16.33 rad/s
fn = 16.33/(2π) = 2.599 Hz

Answer

fn = 2.599 Hz

ExamProblems · examproblems.com/courses/dynamics