Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 2 m/s²car34 m/s

A car speeding at a constant 34 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 2 m/s². How long does it take the police car to catch up? Find t.

vcar = 34 m/sapolice = 2 m/s²v0,police = 0
t = s
2.KinematicsHard
v₀ = 7 m/s35 m

A ball is thrown straight up at 7 m/s from the edge of a roof 35 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 7 m/sh₀ = 35 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
boxv₀ = 3.5 m/sμ = ?

A box slides across a level floor with an initial speed of 3.5 m/s and comes to rest after 6.2 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 3.5 m/sd = 6.2 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
4 kg10 kgTF = 65 Nμ = 0.25

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 65 N pulls the front 10 kg block; the 4 kg block is towed behind. The coefficient of kinetic friction is 0.25 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 4 kgm2 = 10 kgF = 65 Nμ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 40 m/s60°range

A ball is launched at 60° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 40 m/sθ = 60°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 30 mv0​ = 30 m/s55°range

A ball is launched at 55° above horizontal from the top of a 30 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 30 m/sθ = 55°h = 30 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 85 mvmax​ = ?

A car takes a flat curve of radius 85 m. The coefficient of static friction between tyres and road is 0.8. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 85 mμs = 0.8g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1 mv = ?

A ball on a string 1 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 1 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
70°L = 0.5 m0.5 kg

A 0.5 kg ball hangs on a light string of length 0.5 m. It is pulled aside until the string makes 70° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.

m = 0.5 kgL = 0.5 mθ = 70°g = 9.81 m/s²
T = N
10.Work & energyHard
k = 3000 N/m15°μ = 0.155 kg

A spring of stiffness 3000 N/m at the bottom of a 15° slope is compressed by 15 cm against a 5 kg block and released. The coefficient of kinetic friction between block and slope is 0.15. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)

m = 5 kgk = 3000 N/mx = 15 cmθ = 15°μ = 0.15g = 9.81 m/s²
d = m
11.Momentum & collisionsMedium
3.5 kg11 m/s1 kg

A 3.5 kg glider moving at 11 m/s makes a perfectly elastic head-on collision with a 1 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 3.5 kgm2 = 1 kgv1 = 11 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
900 kgv1​ = ?1900 kg

A 900 kg car runs into a parked 1900 kg car. The wrecks lock together and skid 6.5 m before stopping. The coefficient of kinetic friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 900 kgm2 = 1900 kgd = 6.5 mμ = 0.6g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
0 → 1600 rpmI = 2 kg·m²

A motor brings a flywheel with a moment of inertia of 2 kg·m² from rest up to 1600 rpm in 5 s. Ignoring losses, find the average power Pavg it delivers, in kW.

I = 2 kg·m²n = 1600 rpmt = 5 s
Pavg = kW
14.Rigid-body rotationHard
0.85 m0.3 mn1​ = 35 rpm

A person stands on a frictionless turntable and holds a 3.5 kg dumbbell in each hand, 0.85 m from the axis. The person and turntable alone have a moment of inertia of 4.5 kg·m² about the axis. They turn at 35 rpm, then pull the dumbbells in to 0.3 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.

I0 = 4.5 kg·m²m = 2 × 3.5 kgr1 = 0.85 mr2 = 0.3 mn1 = 35 rpm
n2 = rpm
15.Gears & gear trainsMedium
N1​ = 15N2​ = 50

A 1.5 kW motor running at 1500 rpm drives a pinion with 15 teeth, which meshes with a gear with 50 teeth. The gear pair has an efficiency of 98%. Find the output torque T2 on the gear shaft.

P = 1.5 kWn1 = 1500 rpmN1 = 15N2 = 50η = 98%
T2 = N·m
16.Gears & gear trainsHard
A = 18B = 80C = 36D = 50

In a compound gear train, gear A (18 teeth) on the input shaft turning at 1500 rpm drives gear B (80 teeth). Gear C (36 teeth) is fixed to the same shaft as B and drives gear D (50 teeth) on the output shaft. Find the output speed nout.

nin = 1500 rpmA = 18B = 80C = 36D = 50
nout = rpm
17.Springs & pendulumsMedium
L = 0.4 m

A simple pendulum has a length of 0.4 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 0.4 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
1.7 kgk = 50 N/mA = 18 cm

A 1.7 kg mass on a spring with k = 50 N/m is pulled 18 cm from equilibrium and released. Find its maximum acceleration amax.

m = 1.7 kgk = 50 N/mA = 18 cm
amax = m/s²
19.Mechanical vibrationsMedium
k = 8 kN/mc = 280 N·s/mm = 15 kg

A 15 kg mass is supported by a spring with a stiffness of 8 kN/m and a viscous damper with a damping coefficient of 280 N·s/m. Find the damping ratio ζ.

m = 15 kgk = 8 kN/mc = 280 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 10k2​ = 25k3​ = 5m = 50 kg

A 50 kg mass hangs from spring k₃ = 5 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 10 kN/m and k₂ = 25 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 10 kN/mk2 = 25 kN/mk3 = 5 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 34 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·34/2 = 34 s

Answer

t = 34 s

At that moment the police car moves at 2v = 68 m/s.

2.Kinematics

Answer: t = 3.478 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−35 = 7·t − ½·9.81·t²
4.905·t² − 7·t − 35 = 0

Solve the quadratic

Only the positive root is physical.

t = (7 + √(7² + 2·9.81·35))/9.81 = 3.478 s

Answer

t = 3.478 s
3.Newton’s laws

Answer: μ = 0.1007

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 3.5²/(2·6.2) = 0.9879 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 0.9879/9.81 = 0.1007

Answer

μ = 0.1007
4.Newton’s laws

Answer: T = 18.57 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (65 − 34.34)/14 = 2.19 m/s²

Rear block alone

T = m1·(a + μ·g) = 4·(2.19 + 2.453) = 18.57 N

Answer

T = 18.57 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: t = 7.062 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 40·cos 60° = 20 m/s
vy = v0·sin θ = 40·sin 60° = 34.64 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·34.64/9.81 = 7.062 s

Answer

t = 7.062 s
6.Projectile motion

Answer: t = 6.025 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 30·cos 55° = 17.21 m/s
vy = v0·sin θ = 30·sin 55° = 24.57 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 30 + 24.57·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (24.57 + √(603.9 + 588.6))/9.81 = 6.025 s

Answer

t = 6.025 s
7.Circular motion

Answer: vmax = 25.83 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.8·9.81·85) = 25.83 m/s

Answer

vmax = 25.83 m/s (92.98 km/h)
8.Circular motion

Answer: vmin = 3.132 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·1) = 3.132 m/s

Answer

vmin = 3.132 m/s
9.Work & energy

Answer: T = 11.36 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the bottom

v² = 2gL(1 − cos θ) = 2·9.81·0.5·(1 − cos 70°) = 6.455 m²/s²

Forces at the bottom

m·g = 0.5·9.81 = 4.905 N
T = mg + mv²/L = 4.905 + 0.5·6.455/0.5 = 11.36 N

Answer

T = 11.36 N

Check: T = mg(3 − 2cos θ) = 11.36 N.

10.Work & energy

Answer: d = 1.704 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 15 cm = 0.15 m
½kx² = ½·3000·0.15² = 33.75 J

Energy balance along the slope

m·g = 5·9.81 = 49.05 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 33.75/(49.05·(0.2588 + 0.15·0.9659)) = 1.704 m

Answer

d = 1.704 m
11.Momentum & collisions

Answer: v′1 = 6.111 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (3.5 − 1)/(3.5 + 1)·11 = 6.111 m/s
v′2 = 2·3.5/(3.5 + 1)·11 = 17.11 m/s

Answer

v′1 = 6.111 m/s
12.Momentum & collisions

Answer: v1 = 27.21 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.6·9.81·6.5) = 8.747 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 2800·8.747/900 = 27.21 m/s

Answer

v1 = 27.21 m/s
(97.97 km/h)
13.Rigid-body rotation

Answer: Pavg = 5.615 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1600/60 = 167.6 rad/s

Energy

E = ½·I·ω² = ½·2·167.6² = 28074 J

Average power

Pavg = E/t = 28074/5 = 5615 W = 5.615 kW

Answer

Pavg = 5.615 kW
14.Rigid-body rotation

Answer: n2 = 65.21 rpm

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = 4.5 + 2·3.5·0.85² = 9.558 kg·m²
I2 = 4.5 + 2·3.5·0.3² = 5.13 kg·m²

Conservation of angular momentum

n2 = n1·I1/I2 = 35·9.558/5.13 = 65.21 rpm

Answer

n2 = 65.21 rpm

The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.

15.Gears & gear trains

Answer: T2 = 31.19 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 1500/157.1 = 9.549 N·m

Output torque

T2 = 9.549·50/15·0.98 = 31.19 N·m

Answer

T2 = 31.19 N·m
16.Gears & gear trains

Answer: nout = 243 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1500·18/80 = 337.5 rpm = nC

Second stage

nout = 337.5·36/50 = 243 rpm

Answer

nout = 243 rpm

total ratio = 6.173 : 1

17.Springs & pendulums

Answer: T = 1.269 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(0.4/9.81) = 1.269 s

Answer

T = 1.269 s
18.Springs & pendulums

Answer: amax = 5.294 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(50/1.7) = 5.423 rad/s

Maximum acceleration

amax = A·ω² = 0.18·5.423² = 5.294 m/s²

Answer

amax = 5.294 m/s²
19.Mechanical vibrations

Answer: ζ = 0.4041

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(8000·15) = 692.8 N·s/m

Damping ratio

ζ = c/cc = 280/692.8 = 0.4041

Answer

ζ = 0.4041

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 1.489 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 10 + 25 = 35 kN/m
keq = 35·5/(35 + 5) = 4.375 kN/m

Natural frequency

ωn = √(4375/50) = 9.354 rad/s
fn = 9.354/(2π) = 1.489 Hz

Answer

fn = 1.489 Hz

ExamProblems · examproblems.com/courses/dynamics