Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)0.9 s10

A driver moving at 36 km/h sees an obstacle. Her reaction time is 0.9 s, after which the car brakes with a constant deceleration of 5 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 36 km/htr = 0.9 sa = −5 m/s²
d = m
2.KinematicsHard
v₀ = 19 m/s40 m

A ball is thrown straight up at 19 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 19 m/sh₀ = 40 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 25°a = ?m = 11 kg

An 11 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 11 kgθ = 25°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 35°blockv₀ = 5 m/s

A block is given a push so that it starts sliding up a ramp at 35° with a speed of 5 m/s. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 5 m/sθ = 35°μ = 0.15g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 36 m/sθ = ?R = 85 m

A ball is launched from level ground at 36 m/s and must land 85 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 36 m/sR = 85 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
14 mv0​ = 24 m/s60°x = ?

A ball is thrown from ground level at 24 m/s and 60° above the horizontal. It lands on the flat roof of a building 14 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.

v₀ = 24 m/sθ = 60°hroof = 14 mg = 9.81 m/s²
x = m
7.Circular motionMedium
L = 1.9 m50°

A small ball on a string of length 1.9 m moves in a horizontal circle so that the string makes a constant angle of 50° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the speed v of the ball.

L = 1.9 mθ = 50°g = 9.81 m/s²
v = m/s
8.Circular motionHard
r = 0.9 mv = ?

A ball on a string 0.9 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 0.9 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
25°d = 18 mμ = 0.15

A block slides from rest down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.15. Find its speed v after it has slid 18 m along the slope.

θ = 25°μ = 0.15d = 18 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 4 mL = 3.5 mμ = 0.25k = 4000 N/m

A 0.5 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3.5 m long (μ = 0.25) and then runs onto a spring (k = 4000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 0.5 kgh = 4 mL = 3.5 mμ = 0.25k = 4000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
700 kg15 m/s1600 kg

A 700 kg car moving at 15 m/s runs into a stationary 1600 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?

m1 = 700 kgv1 = 15 m/sm2 = 1600 kgv2 = 0
ΔK/K = %
12.Momentum & collisionsHard
20 m/s6 m/s

A 0.35 kg ball hits a wall at 20 m/s and bounces straight back at 6 m/s. The contact lasts 10 ms. Find the average force Favg of the wall on the ball.

m = 0.35 kgvin = 20 m/svout = 6 m/sΔt = 10 ms
Favg = N
13.Rigid-body rotationMedium
L = 0.8 mm = 16.5 kgα

A uniform slender rod of mass 16.5 kg and length 0.8 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 16.5 kgL = 0.8 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
5.5 m/sω

A solid cylinder of mass 18.5 kg rolls without slipping at 5.5 m/s. Find its rotational kinetic energy Erot.

m = 18.5 kgv = 5.5 m/sI = ½·m·r²
Erot = J
15.Gears & gear trainsMedium
N1​ = 24N2​ = 30

A 4 kW motor running at 1500 rpm drives a pinion with 24 teeth, which meshes with a gear with 30 teeth. The gear pair has an efficiency of 96%. Find the torque T1 on the motor shaft.

P = 4 kWn1 = 1500 rpmN1 = 24N2 = 30η = 96%
T1 = N·m
16.Gears & gear trainsHard
A = 12B = 25C = 25D = 45

A 4 kW motor at 1440 rpm drives gear A (12 teeth), which meshes with gear B (25 teeth). Gear C (25 teeth) on the same shaft as B drives gear D (45 teeth) on the output shaft. Each gear mesh has an efficiency of 97%. Find the output torque Tout.

P = 4 kWnin = 1440 rpmA = 12B = 25C = 25D = 45ηmesh = 97%
Tout = N·m
17.Springs & pendulumsMedium
L = 1.1 m

A simple pendulum has a length of 1.1 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 1.1 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
3 kgk = 1800 N/m500 m/s

An 8 g bullet moving at 500 m/s hits and stays in a 3 kg block resting on a frictionless surface. The block is attached to a horizontal spring with k = 1800 N/m. Find the amplitude A of the resulting oscillation in cm.

m = 8 gv = 500 m/sM = 3 kgk = 1800 N/m
A = cm
19.Mechanical vibrationsMedium
k = 200 kN/mζ = 0.3m = 100 kg

A 100 kg mass on a spring with a stiffness of 200 kN/m has a viscous damper giving a damping ratio of 0.3. Find the damped natural frequency fd of its free vibration in Hz.

m = 100 kgk = 200 kN/mζ = 0.3
fd = Hz
20.Mechanical vibrationsHard
k1​ = 15k2​ = 100m = 25 kg

A 25 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 15 kN/m and k₂ = 100 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 15 kN/mk2 = 100 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 19 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 36/3.6 = 10 m/s

Reaction distance

d1 = v₀·tr = 10·0.9 = 9 m

Braking distance

d2 = v₀²/(2a) = 10²/(2·5) = 10 m

Total

d = 9 + 10 = 19 m

Answer

d = 19 m
2.Kinematics

Answer: t = 5.387 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−40 = 19·t − ½·9.81·t²
4.905·t² − 19·t − 40 = 0

Solve the quadratic

Only the positive root is physical.

t = (19 + √(19² + 2·9.81·40))/9.81 = 5.387 s

Answer

t = 5.387 s
3.Newton’s laws

Answer: a = 2.812 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 25° − 0.15·cos 25°) = 9.81·(0.4226 − 0.1359) = 2.812 m/s²

Answer

a = 2.812 m/s²
4.Newton’s laws

Answer: d = 1.83 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 35° + 0.15·cos 35°) = 6.832 m/s²

Distance

d = v₀²/(2a) = 5²/(2·6.832) = 1.83 m

Answer

d = 1.83 m
5.Projectile motion

Answer: θ = 20.02 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·85/36² = 0.6434

Angle

2θ = 40.05° → θ = 20.02°

Answer

θ = 20.02°

The other solution is 90° − θ = 69.98°.

6.Projectile motion

Answer: x = 40.77 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 12 m/s, vy = 20.78 m/s

Time to land on the roof

Larger root: the ball is descending.

14 = 20.78·t − 4.905·t²
t = (20.78 + √(20.78² − 2·9.81·14))/9.81 = 3.397 s

Horizontal distance

x = vx·t = 12·3.397 = 40.77 m

Answer

x = 40.77 m
7.Circular motion

Answer: v = 4.125 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Radius of the circle

r = L·sin θ = 1.9·sin 50° = 1.455 m

Speed

Tension and gravity together give the inward force: tan θ = v²/(r·g).

v = √(r·g·tan θ) = √(1.455·9.81·tan 50°) = 4.125 m/s

Answer

v = 4.125 m/s
8.Circular motion

Answer: vmin = 2.971 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·0.9) = 2.971 m/s

Answer

vmin = 2.971 m/s
9.Work & energy

Answer: v = 10.06 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·18·(0.4226 − 0.15·0.9063)) = 10.06 m/s

Answer

v = 10.06 m/s
10.Work & energy

Answer: x = 8.754 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 4.905·(4 − 0.25·3.5) = 15.33 J

Maximum compression

½kx² = 15.33 → x = √(2·15.33/4000) = 0.08754 m = 8.754 cm

Answer

x = 8.754 cm
11.Momentum & collisions

Answer: ΔK/K = 69.57 %

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 700·15/2300 = 4.565 m/s

Kinetic energy before and after

Kbefore = ½·700·15² = 78750 J
Kafter = ½·2300·4.565² = 23967 J

Fraction lost

ΔK/K = 54783/78750 = 69.57 %

Answer

ΔK/K = 69.57 %

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: Favg = 910 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.35·(6 + 20) = 9.1 N·s

Average force

Favg = J/Δt = 9.1/0.01 = 910 N

Answer

Favg = 910 N
13.Rigid-body rotation

Answer: R = 40.47 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·0.8) = 18.39 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 16.5·(9.81 − 7.357) = 40.47 N

Answer

R = 40.47 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: Erot = 139.9 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·18.5·5.5² = 279.8 J
Erot = ½·I·ω² = ½·0.5·m·r²·(v/r)² = 0.5·279.8 = 139.9 J

Answer

Erot = 139.9 J
15.Gears & gear trains

Answer: T1 = 25.46 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 4000/157.1 = 25.46 N·m

Answer

T1 = 25.46 N·m
16.Gears & gear trains

Answer: Tout = 93.59 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1440·(12/25)·(25/45) = 384 rpm
ωout = 2π·384/60 = 40.21 rad/s

Output power and torque

Pout = 4000·0.97² = 3764 W
Tout = Pout/ωout = 3764/40.21 = 93.59 N·m

Answer

Tout = 93.59 N·m
17.Springs & pendulums

Answer: T = 2.104 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(1.1/9.81) = 2.104 s

Answer

T = 2.104 s
18.Springs & pendulums

Answer: A = 5.436 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Speed after impact

V = m·v/(m + M) = 0.008·500/3.008 = 1.33 m/s

Angular frequency

ω = √(k/(m + M)) = √(1800/3.008) = 24.46 rad/s

Amplitude

A = V/ω = 1.33/24.46 = 0.05436 m = 5.436 cm

Answer

A = 5.436 cm
19.Mechanical vibrations

Answer: fd = 6.79 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(200000/100) = 44.72 rad/s
fn = 44.72/(2π) = 7.118 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 7.118·√(1 − 0.3²) = 6.79 Hz

Answer

fd = 6.79 Hz
20.Mechanical vibrations

Answer: fn = 10.79 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 15 + 100 = 115 kN/m

Natural frequency

ωn = √(115000/25) = 67.82 rad/s
fn = 67.82/(2π) = 10.79 Hz

Answer

fn = 10.79 Hz

ExamProblems · examproblems.com/courses/dynamics