Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 3.5 m/s²car29 m/s

A car speeding at a constant 29 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3.5 m/s². How long does it take the police car to catch up? Find t.

vcar = 29 m/sapolice = 3.5 m/s²v0,police = 0
t = s
2.KinematicsHard
v₀ = 15 m/s15 m

A ball is thrown straight up at 15 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 15 m/sh₀ = 15 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
boxv₀ = 6 m/sμ = ?

A box slides across a level floor with an initial speed of 6 m/s and comes to rest after 37 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 6 m/sd = 37 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
m1​ = 7 kg3 kgμ = 0.3

A 7 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 7 kgm2 = 3 kgμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
14 my = ?v0​ = 14 m/s60°

A ball is kicked from level ground at 14 m/s and 60° above the horizontal towards a wall 14 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 14 m/sθ = 60°x = 14 mg = 9.81 m/s²
y = m
6.Projectile motionHard
12 mv0​ = 31 m/s70°x = ?

A ball is thrown from ground level at 31 m/s and 70° above the horizontal. It lands on the flat roof of a building 12 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.

v₀ = 31 m/sθ = 70°hroof = 12 mg = 9.81 m/s²
x = m
7.Circular motionMedium
θ = 20°to centrev = ?

A curve of radius 360 m is banked at 20°. At what speed v can a car take it with no friction needed at all? Use g = 9.81 m/s².

r = 360 mθ = 20°g = 9.81 m/s²
v = m/s
8.Circular motionHard
r = 1.1 m12 m/svtop​ = ?

A 0.4 kg ball on a light string 1.1 m long is swung in a vertical circle. At the lowest point its speed is 12 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 0.4 kgr = 1.1 mvbottom = 12 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
40°d = 20 mμ = 0.15

A block slides from rest down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.15. Find its speed v after it has slid 20 m along the slope.

θ = 40°μ = 0.15d = 20 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
k = 1000 N/m25°μ = 0.32 kg

A spring of stiffness 1000 N/m at the bottom of a 25° slope is compressed by 10 cm against a 2 kg block and released. The coefficient of kinetic friction between block and slope is 0.3. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)

m = 2 kgk = 1000 N/mx = 10 cmθ = 25°μ = 0.3g = 9.81 m/s²
d = m
11.Momentum & collisionsMedium
2.5 kg5 m/s3 kg

A 2.5 kg glider moving at 5 m/s makes a perfectly elastic head-on collision with a 3 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 2.5 kgm2 = 3 kgv1 = 5 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
23 m/s15 m/s

A 0.5 kg ball hits a wall at 23 m/s and bounces straight back at 15 m/s. The contact lasts 10 ms. Find the average force Favg of the wall on the ball.

m = 0.5 kgvin = 23 m/svout = 15 m/sΔt = 10 ms
Favg = N
13.Rigid-body rotationMedium
n = 500 rpmP = 4 kW

A shaft transmits 4 kW at 500 rpm. Find the torque T in the shaft.

P = 4 kWn = 500 rpm
T = N·m
14.Rigid-body rotationHard
θ = 20°as = 8.5 m

A solid sphere rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². It starts from rest. How long t does it take to roll 8.5 m down the slope?

θ = 20°I = (2/5)·m·r²g = 9.81 m/s²s = 8.5 m
t = s
15.Gears & gear trainsMedium
N1​ = 25N2​ = 60

A 1.5 kW motor running at 2900 rpm drives a pinion with 25 teeth, which meshes with a gear with 60 teeth. Ignore losses. Find the torque T1 on the motor shaft.

P = 1.5 kWn1 = 2900 rpmN1 = 25N2 = 60η = 100%
T1 = N·m
16.Gears & gear trainsHard
A = 18B = 50C = 48D = 50

In a compound gear train, gear A (18 teeth) on the input shaft turning at 1500 rpm drives gear B (50 teeth). Gear C (48 teeth) is fixed to the same shaft as B and drives gear D (50 teeth) on the output shaft. Find the output speed nout.

nin = 1500 rpmA = 18B = 50C = 48D = 50
nout = rpm
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 3 s? Use g = 9.81 m/s². Find L.

T = 3 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
t (s)x (cm)t = ?4.9

A body oscillates in simple harmonic motion with period 1.2 s and amplitude 7 cm. What is the shortest time t it needs to move from equilibrium to a displacement of 4.9 cm?

T = 1.2 sA = 7 cmx = 4.9 cm
t = s
19.Mechanical vibrationsMedium
k = 5 kN/mc = 420 N·s/mm = 25 kg

A 25 kg mass is supported by a spring with a stiffness of 5 kN/m and a viscous damper with a damping coefficient of 420 N·s/m. Find the damping ratio ζ.

m = 25 kgk = 5 kN/mc = 420 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 50k2​ = 12k3​ = 100m = 10 kg

A 10 kg mass hangs from spring k₃ = 100 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 50 kN/m and k₂ = 12 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 10 kgk1 = 50 kN/mk2 = 12 kN/mk3 = 100 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 16.57 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·29/3.5 = 16.57 s

Answer

t = 16.57 s

At that moment the police car moves at 2v = 58 m/s.

2.Kinematics

Answer: t = 3.852 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−15 = 15·t − ½·9.81·t²
4.905·t² − 15·t − 15 = 0

Solve the quadratic

Only the positive root is physical.

t = (15 + √(15² + 2·9.81·15))/9.81 = 3.852 s

Answer

t = 3.852 s
3.Newton’s laws

Answer: μ = 0.04959

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 6²/(2·37) = 0.4865 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 0.4865/9.81 = 0.04959

Answer

μ = 0.04959
4.Newton’s laws

Answer: T = 26.78 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (29.43 − 20.6)/10 = 0.8829 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 7·0.8829 + 20.6 = 26.78 N

Answer

T = 26.78 N
5.Projectile motion

Answer: y = 4.629 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 14·cos 60° = 7 m/s
t = x/vx = 14/7 = 2 s

Height at that time

y = 12.12·2 − ½·9.81·2² = 4.629 m

Answer

y = 4.629 m

The ball is already on its way down at the wall.

6.Projectile motion

Answer: x = 58.25 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 10.6 m/s, vy = 29.13 m/s

Time to land on the roof

Larger root: the ball is descending.

12 = 29.13·t − 4.905·t²
t = (29.13 + √(29.13² − 2·9.81·12))/9.81 = 5.494 s

Horizontal distance

x = vx·t = 10.6·5.494 = 58.25 m

Answer

x = 58.25 m
7.Circular motion

Answer: v = 35.85 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balance

N·cos θ = m·g, N·sin θ = m·v²/r → tan θ = v²/(r·g)

Speed

v = √(r·g·tan θ) = √(360·9.81·tan 20°) = 35.85 m/s

Answer

v = 35.85 m/s
(129.1 km/h)
8.Circular motion

Answer: Ttop = 32.74 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 12² − 4·9.81·1.1 = 100.8 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 0.4·100.8/1.1 − 0.4·9.81 = 32.74 N

Answer

Ttop = 32.74 N
9.Work & energy

Answer: v = 14.39 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·20·(0.6428 − 0.15·0.766)) = 14.39 m/s

Answer

v = 14.39 m/s
10.Work & energy

Answer: d = 0.3669 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 10 cm = 0.1 m
½kx² = ½·1000·0.1² = 5 J

Energy balance along the slope

m·g = 2·9.81 = 19.62 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 5/(19.62·(0.4226 + 0.3·0.9063)) = 0.3669 m

Answer

d = 0.3669 m
11.Momentum & collisions

Answer: v′2 = 4.545 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (2.5 − 3)/(2.5 + 3)·5 = −0.4545 m/s
v′2 = 2·2.5/(2.5 + 3)·5 = 4.545 m/s

Answer

v′2 = 4.545 m/s
12.Momentum & collisions

Answer: Favg = 1900 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.5·(15 + 23) = 19 N·s

Average force

Favg = J/Δt = 19/0.01 = 1900 N

Answer

Favg = 1900 N
13.Rigid-body rotation

Answer: T = 76.39 N·m

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·500/60 = 52.36 rad/s

Torque

T = P/ω = 4000/52.36 = 76.39 N·m

Answer

T = 76.39 N·m
14.Rigid-body rotation

Answer: t = 2.663 s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.4·m·r²·(a/r) → f = 0.4·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 20°/1.4 = 2.397 m/s²

Time

s = ½·a·t² → t = √(2·8.5/2.397) = 2.663 s

Answer

t = 2.663 s
15.Gears & gear trains

Answer: T1 = 4.939 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·2900/60 = 303.7 rad/s
T1 = P/ω₁ = 1500/303.7 = 4.939 N·m

Answer

T1 = 4.939 N·m
16.Gears & gear trains

Answer: nout = 518.4 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1500·18/50 = 540 rpm = nC

Second stage

nout = 540·48/50 = 518.4 rpm

Answer

nout = 518.4 rpm

total ratio = 2.894 : 1

17.Springs & pendulums

Answer: L = 2.236 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(3/2π)² = 2.236 m

Answer

L = 2.236 m
18.Springs & pendulums

Answer: t = 0.1481 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = 2π/T = 2π/1.2 = 5.236 rad/s

Solve for the time

0.7 = sin(ω·t) → ω·t = arcsin(0.7) = 0.7754 rad
t = 0.7754/5.236 = 0.1481 s

Answer

t = 0.1481 s
19.Mechanical vibrations

Answer: ζ = 0.594

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(5000·25) = 707.1 N·s/m

Damping ratio

ζ = c/cc = 420/707.1 = 0.594

Answer

ζ = 0.594

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 9.846 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 50 + 12 = 62 kN/m
keq = 62·100/(62 + 100) = 38.27 kN/m

Natural frequency

ωn = √(38272/10) = 61.86 rad/s
fn = 61.86/(2π) = 9.846 Hz

Answer

fn = 9.846 Hz

ExamProblems · examproblems.com/courses/dynamics