Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 5 m/s²car32 m/s

A car speeding at a constant 32 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 5 m/s². How long does it take the police car to catch up? Find t.

vcar = 32 m/sapolice = 5 m/s²v0,police = 0
t = s
2.KinematicsHard
v₀ = 17 m/s30 m

A ball is thrown straight up at 17 m/s from the edge of a roof 30 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 17 m/sh₀ = 30 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
boxv₀ = 8.5 m/sμ = ?

A box slides across a level floor with an initial speed of 8.5 m/s and comes to rest after 15 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 8.5 m/sd = 15 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
7 kg2 kgTF = 80 Nμ = 0.3

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 80 N pulls the front 2 kg block; the 7 kg block is towed behind. The coefficient of kinetic friction is 0.3 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 7 kgm2 = 2 kgF = 80 Nμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = ?75°R = 30 m

A ball is launched from level ground at 75° above the horizontal and lands 30 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 75°R = 30 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 15 mv0​ = 31 m/s25°α = ?

A ball is launched at 31 m/s and 25° above the horizontal from the top of a 15 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?

v₀ = 31 m/sθ = 25°h = 15 mg = 9.81 m/s²
α = °
7.Circular motionMedium
r = 125 mvmax​ = ?

A car takes a flat curve of radius 125 m. The coefficient of static friction between tyres and road is 0.3. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 125 mμs = 0.3g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
θ = 30°to centrevmax​ = ?

A curve of radius 40 m is banked at 30°, and the coefficient of static friction between tyres and road is 0.4. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.

r = 40 mθ = 30°μs = 0.4g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
0.05 kgk = 1500 N/mh = ?

A toy launcher has a vertical spring of stiffness 1500 N/m. A 0.05 kg ball is placed on it and the spring is compressed by 2 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.

m = 0.05 kgk = 1500 N/mx = 2 cmg = 9.81 m/s²
h = m
10.Work & energyHard
2 kg2 kgμ = 0.25d = 3 m

A 2 kg block rests on a rough horizontal table (μ = 0.25). A light string runs from it over a smooth pulley at the edge of the table to a hanging 2 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 3 m.

m1 = 2 kgm2 = 2 kgμ = 0.25d = 3 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
0.5 kg6 m/s2 kg

A 0.5 kg glider moving at 6 m/s makes a perfectly elastic head-on collision with a 2 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 0.5 kgm2 = 2 kgv1 = 6 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
9 m/s8 m/s

A 0.6 kg ball hits a wall at 9 m/s and bounces straight back at 8 m/s. The contact lasts 20 ms. Find the average force Favg of the wall on the ball.

m = 0.6 kgvin = 9 m/svout = 8 m/sΔt = 20 ms
Favg = N
13.Rigid-body rotationMedium
0 → 1500 rpmI = 21.5 kg·m²

A motor brings a flywheel with a moment of inertia of 21.5 kg·m² from rest up to 1500 rpm in 39 s. Ignoring losses, find the average power Pavg it delivers, in kW.

I = 21.5 kg·m²n = 1500 rpmt = 39 s
Pavg = kW
14.Rigid-body rotationHard
θ = 15°a

A solid cylinder rolls without slipping down a slope inclined at 15° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of its centre.

θ = 15°I = ½·m·r²g = 9.81 m/s²
a = m/s²
15.Gears & gear trainsMedium
d1​ = 125 mmd2​ = 315 mm960 rpmn2​ = ?

A 125 mm pulley at 960 rpm drives a 315 mm pulley by a belt with 2 % slip. Find the speed n2 of the driven pulley.

n1 = 960 rpmd1 = 125 mmd2 = 315 mms = 2 %
n2 = rpm
16.Gears & gear trainsHard
d1​ = 100 mmd2​ = 450 mm1450 rpmC = 800 mmT1​ = 500 NT2​P = ?

An open belt connects a 100 mm driving pulley at 1450 rpm to a 450 mm pulley; the centres are 800 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 500 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 100 mmn1 = 1450 rpmd2 = 450 mmC = 800 mmμ = 0.25T1 = 500 N
P = kW
17.Springs & pendulumsMedium
L = 3 m

A simple pendulum has a length of 3 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 3 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
mk = 80 N/mA = 6 cmx = 5 cm

A mass on a spring with k = 80 N/m oscillates on a frictionless surface with an amplitude of 6 cm. Find its kinetic energy K when it is 5 cm from equilibrium.

k = 80 N/mA = 6 cmx = 5 cm
K = J
19.Mechanical vibrationsMedium
k = 10 kN/mζ = 0.45m = 100 kg

A 100 kg mass on a spring with a stiffness of 10 kN/m has a viscous damper giving a damping ratio of 0.45. Find the damped natural frequency fd of its free vibration in Hz.

m = 100 kgk = 10 kN/mζ = 0.45
fd = Hz
20.Mechanical vibrationsHard
k1​ = 60k2​ = 40k3​ = 100m = 25 kg

A 25 kg mass hangs from spring k₃ = 100 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 60 kN/m and k₂ = 40 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 60 kN/mk2 = 40 kN/mk3 = 100 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 12.8 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·32/5 = 12.8 s

Answer

t = 12.8 s

At that moment the police car moves at 2v = 64 m/s.

2.Kinematics

Answer: t = 4.753 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−30 = 17·t − ½·9.81·t²
4.905·t² − 17·t − 30 = 0

Solve the quadratic

Only the positive root is physical.

t = (17 + √(17² + 2·9.81·30))/9.81 = 4.753 s

Answer

t = 4.753 s
3.Newton’s laws

Answer: μ = 0.2455

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 8.5²/(2·15) = 2.408 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 2.408/9.81 = 0.2455

Answer

μ = 0.2455
4.Newton’s laws

Answer: T = 62.22 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (80 − 26.49)/9 = 5.946 m/s²

Rear block alone

T = m1·(a + μ·g) = 7·(5.946 + 2.943) = 62.22 N

Answer

T = 62.22 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: v0 = 24.26 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·30/sin 150°) = 24.26 m/s

Answer

v0 = 24.26 m/s
6.Projectile motion

Answer: α = 37.53 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 31·cos 25° = 28.1 m/s
vy0 = 31·sin 25° = 13.1 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(13.1² + 2·9.81·15) = 21.59 m/s

Impact angle

tan α = vy/vx = 21.59/28.1 → α = 37.53°

Answer

α = 37.53°
7.Circular motion

Answer: vmax = 19.18 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.3·9.81·125) = 19.18 m/s

Answer

vmax = 19.18 m/s (69.05 km/h)
8.Circular motion

Answer: vmax = 22.33 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points down the slope.

N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g

Speed

v = √(40·9.81·0.8464/0.666) = 22.33 m/s

Answer

vmax = 22.33 m/s
(80.39 km/h)
9.Work & energy

Answer: h = 0.6116 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 2 cm = 0.02 m
½kx² = ½·1500·0.02² = 0.3 J

Height

m·g = 0.05·9.81 = 0.4905 N
h = ½kx²/(mg) = 0.3/0.4905 = 0.6116 m

Answer

h = 0.6116 m
10.Work & energy

Answer: v = 4.698 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 19.62·3 = 58.86 J
μ·m₁g·d = 0.25·19.62·3 = 14.71 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 44.14 → v = √(2·44.14/4) = 4.698 m/s

Answer

v = 4.698 m/s
11.Momentum & collisions

Answer: v′1 = −3.6 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (0.5 − 2)/(0.5 + 2)·6 = −3.6 m/s
v′2 = 2·0.5/(0.5 + 2)·6 = 2.4 m/s

Answer

v′1 = −3.6 m/s

The minus sign means the first glider bounces back.

12.Momentum & collisions

Answer: Favg = 510 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.6·(8 + 9) = 10.2 N·s

Average force

Favg = J/Δt = 10.2/0.02 = 510 N

Answer

Favg = 510 N
13.Rigid-body rotation

Answer: Pavg = 6.801 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1500/60 = 157.1 rad/s

Energy

E = ½·I·ω² = ½·21.5·157.1² = 265246 J

Average power

Pavg = E/t = 265246/39 = 6801 W = 6.801 kW

Answer

Pavg = 6.801 kW
14.Rigid-body rotation

Answer: a = 1.693 m/s²

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.5·m·r²·(a/r) → f = 0.5·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 15°/1.5 = 1.693 m/s²

Answer

a = 1.693 m/s²
15.Gears & gear trains

Answer: n2 = 373.3 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

960·125/315 = 381 rpm

With slip

n2 = 381·0.98 = 373.3 rpm

Answer

n2 = 373.3 rpm
16.Gears & gear trains

Answer: P = 1.864 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.701 rad

Slack-side tension

eμθ = e0.6751 = 1.964, T₂ = 500/1.964 = 254.5 N

Power

P = (500 − 254.5)·7.592 = 1.864 kW

Answer

P = 1.864 kW
17.Springs & pendulums

Answer: T = 3.475 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(3/9.81) = 3.475 s

Answer

T = 3.475 s
18.Springs & pendulums

Answer: K = 0.044 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Total energy

E = ½·k·A² = ½·80·0.06² = 0.144 J

Spring energy at x

U = ½·k·x² = ½·80·0.05² = 0.1 J

Kinetic energy

K = 0.144 − 0.1 = 0.044 J

Answer

K = 0.044 J
19.Mechanical vibrations

Answer: fd = 1.421 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(10000/100) = 10 rad/s
fn = 10/(2π) = 1.592 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 1.592·√(1 − 0.45²) = 1.421 Hz

Answer

fd = 1.421 Hz
20.Mechanical vibrations

Answer: fn = 7.118 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 60 + 40 = 100 kN/m
keq = 100·100/(100 + 100) = 50 kN/m

Natural frequency

ωn = √(50000/25) = 44.72 rad/s
fn = 44.72/(2π) = 7.118 Hz

Answer

fn = 7.118 Hz

ExamProblems · examproblems.com/courses/dynamics