In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 45 km/h brakes with a constant deceleration of 4.5 m/s² until it stops. Find the braking distance s.
v₀ = 45 km/ha = −4.5 m/s²v = 0
s = m
2.KinematicsHard
A ball is thrown straight up at 11 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.
v₀ = 11 m/sh₀ = 5 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
Masses of 8 kg and 1.5 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 8 kgm2 = 1.5 kgg = 9.81 m/s²
T = N
4.Newton’s lawsHard
A 1.5 kg block on a ramp at 25° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 5.5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.15. Use g = 9.81 m/s². Find the acceleration a of the system.
A ball is launched from level ground at 20° above the horizontal and lands 100 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.
θ = 20°R = 100 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
A ball is launched at 45° above horizontal from the top of a 20 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 19 m/sθ = 45°h = 20 mg = 9.81 m/s²
t = s
7.Circular motionMedium
A car takes a flat curve of radius 150 m. The coefficient of static friction between tyres and road is 0.4. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 150 mμs = 0.4g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A curve of radius 60 m is banked at 8°, and the coefficient of static friction between tyres and road is 0.2. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.
r = 60 mθ = 8°μs = 0.2g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
A 0.5 kg block slides 5 m down a slope at 45° to the horizontal, with a coefficient of kinetic friction of 0.2. Find the work Wf done against friction.
m = 0.5 kgθ = 45°μ = 0.2d = 5 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
An 8 kg block starts from rest at the bottom of a 15° slope and is pulled up the slope by a constant force of 55 N parallel to the slope. The coefficient of kinetic friction is 0.3. Find the speed v of the block after it has moved 2 m up the slope.
A 1400 kg car moving at 14 m/s runs into a stationary 1900 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?
m1 = 1400 kgv1 = 14 m/sm2 = 1900 kgv2 = 0
ΔK/K = %
12.Momentum & collisionsHard
A 5 g bullet is fired horizontally into a 3.5 kg block hanging from light strings 1 m long, and stays in it. The strings swing out to a largest angle of 40° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 5 gM = 3.5 kgL = 1 mθ = 40°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
A uniform slender rod of mass 13 kg and length 0.7 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find its angular acceleration α just after release.
m = 13 kgL = 0.7 mg = 9.81 m/s²
α = rad/s²
14.Rigid-body rotationHard
A solid sphere of mass 10.5 kg rolls without slipping at 10 m/s. What percentage p of its total kinetic energy is rotational?
m = 10.5 kgv = 10 m/sI = (2/5)·m·r²
p = %
15.Gears & gear trainsMedium
A 5.5 kW motor running at 1450 rpm drives a pinion with 24 teeth and a module of 4 mm. Find the tangential force Ft on the pinion teeth.
P = 5.5 kWn = 1450 rpmN1 = 24m = 4 mm
Ft = N
16.Gears & gear trainsHard
In a compound gear train, gear A (36 teeth) on the input shaft turning at 2900 rpm drives gear B (40 teeth). Gear C (25 teeth) is fixed to the same shaft as B and drives gear D (50 teeth) on the output shaft. Find the output speed nout.
nin = 2900 rpmA = 36B = 40C = 25D = 50
nout = rpm
17.Springs & pendulumsMedium
How long must a simple pendulum be to have a period of 1 s? Use g = 9.81 m/s². Find L.
T = 1 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
A 1.2 kg mass is attached to the lower end of an unstretched vertical spring with k = 360 N/m and released from rest. Use g = 9.81 m/s². Find the greatest extension xmax of the spring in cm.
m = 1.2 kgk = 360 N/mg = 9.81 m/s²
xmax = cm
19.Mechanical vibrationsMedium
A 100 kg mass is supported by a spring with a stiffness of 12 kN/m and a viscous damper with a damping coefficient of 220 N·s/m. Find the damping ratio ζ.
m = 100 kgk = 12 kN/mc = 220 N·s/m
ζ =
20.Mechanical vibrationsHard
A 10 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 100 kN/m and k₂ = 80 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.
m = 10 kgk1 = 100 kN/mk2 = 80 kN/m
keq = kN/m
3Solutions
1.Kinematics
Answer: s = 17.36 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 45/3.6 = 12.5 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 12.5²/(2·4.5) = 17.36 m
Answer
s = 17.36 m
2.Kinematics
Answer: hmax = 11.17 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Rise above the roof
0 = v₀² − 2·g·Δh → Δh = 11²/(2·9.81) = 6.167 m
Height above the ground
hmax = 5 + 6.167 = 11.17 m
Answer
hmax = 11.17 m
3.Newton’s laws
Answer: T = 24.78 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Acceleration
The net driving force is the difference of the weights; it moves the total mass.
a = (8 − 1.5)·9.81/(8 + 1.5) = 6.712 m/s²
Tension from the lighter mass
T − m2·g = m2·a → T = 1.5·(9.81 + 6.712) = 24.78 N
Answer
T = 24.78 N
4.Newton’s laws
Answer: a = 6.534 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the string
m₂·g = 53.96 N
m₁·g·sin θ = 6.219 N
μ·m₁·g·cos θ = 2 N
Acceleration of the system
a = (53.96 − 6.219 − 2)/7 = 6.534 m/s²
Answer
a = 6.534 m/s²
5.Projectile motion
Answer: v0 = 39.07 m/s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Solve the range formula for v₀
v₀ = √(g·R/sin 2θ) = √(9.81·100/sin 40°) = 39.07 m/s
Answer
v0 = 39.07 m/s
6.Projectile motion
Answer: t = 3.809 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 19·cos 45° = 13.44 m/s
vy = v0·sin θ = 19·sin 45° = 13.44 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 20 + 13.44·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (13.44 + √(180.5 + 392.4))/9.81 = 3.809 s
Answer
t = 3.809 s
7.Circular motion
Answer: vmax = 24.26 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.4·9.81·150) = 24.26 m/s
Answer
vmax = 24.26 m/s (87.34 km/h)
8.Circular motion
Answer: vmax = 14.36 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Force balances
Friction points down the slope.
N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g
Speed
v = √(60·9.81·0.3372/0.9624) = 14.36 m/s
Answer
vmax = 14.36 m/s
(51.7 km/h)
9.Work & energy
Answer: Wf = 3.468 J
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Friction force
N = mg·cos θ = 4.905·0.7071 = 3.468 N
F = μN = 0.2·3.468 = 0.6937 N
Work against friction
Wf = F·d = 0.6937·5 = 3.468 J
Answer
Wf = 3.468 J
10.Work & energy
Answer: v = 2.444 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Forces along the slope
m·g = 8·9.81 = 78.48 N
mg·sin θ = 20.31 N
μ·mg·cos θ = 22.74 N
Work–energy
½mv² = (55 − 43.05)·2 = 23.89 J
v = √(2·23.89/8) = 2.444 m/s
Answer
v = 2.444 m/s
11.Momentum & collisions
Answer: ΔK/K = 57.58 %
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 1400·14/3300 = 5.939 m/s
Kinetic energy before and after
Kbefore = ½·1400·14² = 137200 J
Kafter = ½·3300·5.939² = 58206 J
Fraction lost
ΔK/K = 78994/137200 = 57.58 %
Answer
ΔK/K = 57.58 %
The lost energy goes into deformation, heat and sound.
12.Momentum & collisions
Answer: v = 1502 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 1·(1 − cos 40°) = 0.234 m
Speed after impact
V = √(2·9.81·0.234) = 2.142 m/s
Collision
v = (m + M)·V/m = 3.505·2.142/0.005 = 1502 m/s
Answer
v = 1502 m/s
13.Rigid-body rotation
Answer: α = 21.02 rad/s²
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Moments about the pin
At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
The share depends only on the shape, not on the mass or the speed.
15.Gears & gear trains
Answer: Ft = 754.6 N
Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.
Torque on the pinion
ω = 2π·1450/60 = 151.8 rad/s
T = P/ω = 5500/151.8 = 36.22 N·m
Pitch diameter
d = m·N = 4·24 = 96 mm
Tangential force
Ft = 2T/d = 2·36.22/0.096 = 754.6 N
Answer
Ft = 754.6 N
16.Gears & gear trains
Answer: nout = 1305 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
First stage
nB = 2900·36/40 = 2610 rpm = nC
Second stage
nout = 2610·25/50 = 1305 rpm
Answer
nout = 1305 rpm
total ratio = 2.222 : 1
17.Springs & pendulums
Answer: L = 0.2485 m
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for the length
L = g·(T/2π)² = 9.81·(1/2π)² = 0.2485 m
Answer
L = 0.2485 m
18.Springs & pendulums
Answer: xmax = 6.54 cm
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Equilibrium and amplitude
x₀ = m·g/k = 1.2·9.81/360 = 0.0327 m = A
Lowest point
xmax = 2A = 0.0654 m = 6.54 cm
Answer
xmax = 6.54 cm
19.Mechanical vibrations
Answer: ζ = 0.1004
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(12000·100) = 2191 N·s/m
Damping ratio
ζ = c/cc = 220/2191 = 0.1004
Answer
ζ = 0.1004
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: keq = 180 kN/m
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.