In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 120 km/h brakes with a constant deceleration of 7.5 m/s² until it stops. How long does braking take? Find t.
v₀ = 120 km/ha = −7.5 m/s²v = 0
t = s
2.KinematicsHard
A ball is thrown straight up at 20 m/s from the edge of a roof 35 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 20 m/sh₀ = 35 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 15 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 15 kgθ = 25°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
An 8 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5.5 kg mass. The coefficient of kinetic friction between block and table is 0.25. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 8 kgm2 = 5.5 kgμ = 0.25g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched from level ground at 20° above the horizontal and lands 50 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.
θ = 20°R = 50 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
A ball is launched at 25° above horizontal from the top of a 5 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 35 m/sθ = 25°h = 5 mg = 9.81 m/s²
t = s
7.Circular motionMedium
A curve of radius 400 m is banked at 12°. At what speed v can a car take it with no friction needed at all? Use g = 9.81 m/s².
r = 400 mθ = 12°g = 9.81 m/s²
v = m/s
8.Circular motionHard
A 1.8 kg ball on a string 1.5 m long is swung in a vertical circle. At the lowest point it moves at 6 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 1.8 kgr = 1.5 mv = 6 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
A block slides from rest down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.15. Find its speed v after it has slid 13 m along the slope.
θ = 30°μ = 0.15d = 13 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
A 2 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1 m long (μ = 0.1) and then runs onto a spring (k = 5000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.
m = 2 kgh = 4 mL = 1 mμ = 0.1k = 5000 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
A 4.5 kg glider moving at 11 m/s makes a perfectly elastic head-on collision with a 2.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 4.5 kgm2 = 2.5 kgv1 = 11 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
A 1300 kg car runs into a parked 1200 kg car. The wrecks lock together and skid 7.5 m before stopping. The coefficient of kinetic friction between tyres and road is 0.75. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.
A motor delivers a torque of 600 N·m at 2900 rpm. Find its power output P in kW.
T = 600 N·mn = 2900 rpm
P = kW
14.Rigid-body rotationHard
A solid sphere rolls without slipping down a slope inclined at 10° to the horizontal. Use g = 9.81 m/s². It starts from rest. How long t does it take to roll 8.5 m down the slope?
θ = 10°I = (2/5)·m·r²g = 9.81 m/s²s = 8.5 m
t = s
15.Gears & gear trainsMedium
A belt runs on a 120 mm driving pulley at 720 rpm. The tension is 500 N on the tight side and 100 N on the slack side. Find the power P transmitted, in kW.
d1 = 120 mmn1 = 720 rpmT1 = 500 NT2 = 100 N
P = kW
16.Gears & gear trainsHard
In a compound gear train, gear A (30 teeth) on the input shaft turning at 2900 rpm drives gear B (60 teeth). Gear C (16 teeth) is fixed to the same shaft as B and drives gear D (40 teeth) on the output shaft. Find the output speed nout.
nin = 2900 rpmA = 30B = 60C = 16D = 40
nout = rpm
17.Springs & pendulumsMedium
A 2.1 kg mass on a spring with k = 430 N/m oscillates on a frictionless surface with an amplitude of 15 cm. Find its speed v when it is 8 cm from equilibrium.
m = 2.1 kgk = 430 N/mA = 15 cmx = 8 cm
v = m/s
18.Springs & pendulumsHard
A 2.9 kg mass on a spring with k = 20 N/m is pulled 13 cm from equilibrium and released. Find its maximum acceleration amax.
m = 2.9 kgk = 20 N/mA = 13 cm
amax = m/s²
19.Mechanical vibrationsMedium
A 20 kg mass is supported by a spring with a stiffness of 20 kN/m and a viscous damper with a damping coefficient of 190 N·s/m. Find the damping ratio ζ.
m = 20 kgk = 20 kN/mc = 190 N·s/m
ζ =
20.Mechanical vibrationsHard
A 25 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 50 kN/m and the lower one k₂ = 80 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 25 kgk1 = 50 kN/mk2 = 80 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: t = 4.444 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 120/3.6 = 33.33 m/s
Braking time
0 = v₀ − a·t → t = v₀/a = 33.33/7.5 = 4.444 s
Answer
t = 4.444 s
2.Kinematics
Answer: t = 5.399 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−35 = 20·t − ½·9.81·t²
4.905·t² − 20·t − 35 = 0
Solve the quadratic
Only the positive root is physical.
t = (20 + √(20² + 2·9.81·35))/9.81 = 5.399 s
Answer
t = 5.399 s
3.Newton’s laws
Answer: a = 2.812 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Solve the range formula for v₀
v₀ = √(g·R/sin 2θ) = √(9.81·50/sin 40°) = 27.62 m/s
Answer
v0 = 27.62 m/s
6.Projectile motion
Answer: t = 3.322 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 35·cos 25° = 31.72 m/s
vy = v0·sin θ = 35·sin 25° = 14.79 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 5 + 14.79·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (14.79 + √(218.8 + 98.1))/9.81 = 3.322 s
Answer
t = 3.322 s
7.Circular motion
Answer: v = 28.88 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
v = √(r·g·tan θ) = √(400·9.81·tan 12°) = 28.88 m/s
Answer
v = 28.88 m/s
(104 km/h)
8.Circular motion
Answer: T = 60.86 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 1.8·9.81 + 1.8·6²/1.5 = 17.66 + 43.2 = 60.86 N
Answer
T = 60.86 N
9.Work & energy
Answer: v = 9.716 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·13·(0.5 − 0.15·0.866)) = 9.716 m/s
Answer
v = 9.716 m/s
10.Work & energy
Answer: v = 8.747 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 19.62·(4 − 0.1·1) = 76.52 J
Speed at the spring
½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·3.9) = 8.747 m/s
Answer
v = 8.747 m/s
11.Momentum & collisions
Answer: v′1 = 3.143 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (4.5 − 2.5)/(4.5 + 2.5)·11 = 3.143 m/s
v′2 = 2·4.5/(4.5 + 2.5)·11 = 14.14 m/s
Answer
v′1 = 3.143 m/s
12.Momentum & collisions
Answer: v1 = 20.2 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·2900/60 = 303.7 rad/s
Power
P = T·ω = 600·303.7 = 182212 W = 182.2 kW
Answer
P = 182.2 kW
14.Rigid-body rotation
Answer: t = 3.738 s
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Equations of motion
m·g·sin θ − f = m·a
f·r = I·α = 0.4·m·r²·(a/r) → f = 0.4·m·a
Acceleration
a = g·sin θ/(1 + c) = 9.81·sin 10°/1.4 = 1.217 m/s²
Time
s = ½·a·t² → t = √(2·8.5/1.217) = 3.738 s
Answer
t = 3.738 s
15.Gears & gear trains
Answer: P = 1.81 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt speed
v = 4.524 m/s
Power
P = (500 − 100)·4.524 = 1810 W = 1.81 kW
Answer
P = 1.81 kW
16.Gears & gear trains
Answer: nout = 580 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
First stage
nB = 2900·30/60 = 1450 rpm = nC
Second stage
nout = 1450·16/40 = 580 rpm
Answer
nout = 580 rpm
total ratio = 5 : 1
17.Springs & pendulums
Answer: v = 1.816 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(430/2.1) = 14.31 rad/s
Speed at x
v = ω·√(A² − x²) = 14.31·√(0.15² − 0.08²) = 1.816 m/s
Answer
v = 1.816 m/s
18.Springs & pendulums
Answer: amax = 0.8966 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(20/2.9) = 2.626 rad/s
Maximum acceleration
amax = A·ω² = 0.13·2.626² = 0.8966 m/s²
Answer
amax = 0.8966 m/s²
19.Mechanical vibrations
Answer: ζ = 0.1502
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(20000·20) = 1265 N·s/m
Damping ratio
ζ = c/cc = 190/1265 = 0.1502
Answer
ζ = 0.1502
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 5.584 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.