Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)3.419 s22.22

A car driving at 80 km/h brakes with a constant deceleration of 6.5 m/s² until it stops. Find the braking distance s.

v₀ = 80 km/ha = −6.5 m/s²v = 0
s = m
2.KinematicsHard
a = 34 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 34 m/s² for 3 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 34 m/s²t1 = 3 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 40°a = ?m = 11 kg

An 11 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 11 kgθ = 40°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 4.5 kg3.5 kgμ = 0.25

A 4.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3.5 kg mass. The coefficient of kinetic friction between block and table is 0.25. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 4.5 kgm2 = 3.5 kgμ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
10 my = ?v0​ = 16 m/s70°

A ball is kicked from level ground at 16 m/s and 70° above the horizontal towards a wall 10 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 16 m/sθ = 70°x = 10 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 10 mv0​ = 24 m/s60°H = ?

A ball is launched at 24 m/s and 60° above the horizontal from the top of a 10 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 24 m/sθ = 60°h = 10 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 125 mvmax​ = ?

A car takes a flat curve of radius 125 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 125 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.7 mv = 6.5 m/s

A 0.4 kg ball on a string 0.7 m long is swung in a vertical circle. At the lowest point it moves at 6.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 0.4 kgr = 0.7 mv = 6.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
40°L = 0.5 m0.5 kg

A 0.5 kg ball hangs on a light string of length 0.5 m. It is pulled aside until the string makes 40° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.

m = 0.5 kgL = 0.5 mθ = 40°g = 9.81 m/s²
T = N
10.Work & energyHard
h = 3 mL = 3 mμ = 0.25k = 4000 N/m

A 4 kg block is released from rest at height 3 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3 m long (μ = 0.25) and then runs onto a spring (k = 4000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 4 kgh = 3 mL = 3 mμ = 0.25k = 4000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
1 kg3 m/s2 kg

A 1 kg glider moving at 3 m/s makes a perfectly elastic head-on collision with a 2 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 1 kgm2 = 2 kgv1 = 3 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
11 m/s15 m/s

A 0.5 kg ball hits a wall at 11 m/s and bounces straight back at 15 m/s. The contact lasts 50 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.5 kgvin = 11 m/svout = 15 m/sΔt = 50 ms
J = N·s
13.Rigid-body rotationMedium
n = 1900 rpmTb​ = 120 N·mI = 11 kg·m²

A flywheel with a moment of inertia of 11 kg·m² spins at 1900 rpm. A brake applies a constant friction torque of 120 N·m. How many revolutions N does the flywheel make before it stops?

I = 11 kg·m²n = 1900 rpmTb = 120 N·m
N = rev
14.Rigid-body rotationHard
θ = 10°vs = 5 m

A thin hoop starts from rest and rolls without slipping down a slope inclined at 10° to the horizontal. Use g = 9.81 m/s². Its radius is 0.4 m. Find its angular velocity ω after it has rolled 5 m along the slope.

θ = 10°s = 5 mI = m·r²g = 9.81 m/s²r = 0.4 m
ω = rad/s
15.Gears & gear trainsMedium
d1​ = 125 mmd2​ = 200 mm1500 rpmT1​ = 1200 NT2​ = 480 NP = ?

A belt runs on a 125 mm driving pulley at 1500 rpm. The tension is 1200 N on the tight side and 480 N on the slack side. Find the power P transmitted, in kW.

d1 = 125 mmn1 = 1500 rpmT1 = 1200 NT2 = 480 N
P = kW
16.Gears & gear trainsHard
d1​ = 150 mmd2​ = 250 mm720 rpmC = 500 mmT1​ = 600 NT2​P = ?

An open belt connects a 150 mm driving pulley at 720 rpm to a 250 mm pulley; the centres are 500 mm apart. The coefficient of friction is 0.35 and the tight-side tension may not exceed 600 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 150 mmn1 = 720 rpmd2 = 250 mmC = 500 mmμ = 0.35T1 = 600 N
P = kW
17.Springs & pendulumsMedium
L = 0.6 m

A simple pendulum has a length of 0.6 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 0.6 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
2.9 kgk = 210 N/m

A 2.9 kg mass is attached to the lower end of an unstretched vertical spring with k = 210 N/m and released from rest. Use g = 9.81 m/s². Find the greatest speed vmax of the mass.

m = 2.9 kgk = 210 N/mg = 9.81 m/s²
vmax = m/s
19.Mechanical vibrationsMedium
k = 40 kN/mζ = 0.3m = 150 kg

A 150 kg mass on a spring with a stiffness of 40 kN/m has a viscous damper giving a damping ratio of 0.3. Find the damped natural frequency fd of its free vibration in Hz.

m = 150 kgk = 40 kN/mζ = 0.3
fd = Hz
20.Mechanical vibrationsHard
k1​ = 10k2​ = 15m = 5 kg

A 5 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 10 kN/m and the lower one k₂ = 15 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 5 kgk1 = 10 kN/mk2 = 15 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: s = 37.99 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 80/3.6 = 22.22 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 22.22²/(2·6.5) = 37.99 m

Answer

s = 37.99 m
2.Kinematics

Answer: hmax = 683.3 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 34·3 = 102 m/s
h₁ = ½·34·3² = 153 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 102²/(2·9.81) = 530.3 m
hmax = 153 + 530.3 = 683.3 m

Answer

hmax = 683.3 m
3.Newton’s laws

Answer: a = 5.554 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 40° − 0.1·cos 40°) = 9.81·(0.6428 − 0.0766) = 5.554 m/s²

Answer

a = 5.554 m/s²
4.Newton’s laws

Answer: T = 24.14 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (34.34 − 11.04)/8 = 2.912 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 4.5·2.912 + 11.04 = 24.14 N

Answer

T = 24.14 N
5.Projectile motion

Answer: y = 11.1 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 16·cos 70° = 5.472 m/s
t = x/vx = 10/5.472 = 1.827 s

Height at that time

y = 15.04·1.827 − ½·9.81·1.827² = 11.1 m

Answer

y = 11.1 m

The ball is already on its way down at the wall.

6.Projectile motion

Answer: H = 32.02 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 24·sin 60° = 20.78 m/s

Rise above the cliff

Δh = vy²/(2g) = 20.78²/(2·9.81) = 22.02 m

Height above the ground

H = 10 + 22.02 = 32.02 m

Answer

H = 32.02 m
7.Circular motion

Answer: vmax = 29.3 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·125) = 29.3 m/s

Answer

vmax = 29.3 m/s (105.5 km/h)
8.Circular motion

Answer: T = 28.07 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 0.4·9.81 + 0.4·6.5²/0.7 = 3.924 + 24.14 = 28.07 N

Answer

T = 28.07 N
9.Work & energy

Answer: T = 7.2 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the bottom

v² = 2gL(1 − cos θ) = 2·9.81·0.5·(1 − cos 40°) = 2.295 m²/s²

Forces at the bottom

m·g = 0.5·9.81 = 4.905 N
T = mg + mv²/L = 4.905 + 0.5·2.295/0.5 = 7.2 N

Answer

T = 7.2 N

Check: T = mg(3 − 2cos θ) = 7.2 N.

10.Work & energy

Answer: x = 21.01 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 39.24·(3 − 0.25·3) = 88.29 J

Maximum compression

½kx² = 88.29 → x = √(2·88.29/4000) = 0.2101 m = 21.01 cm

Answer

x = 21.01 cm
11.Momentum & collisions

Answer: v′1 = −1 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (1 − 2)/(1 + 2)·3 = −1 m/s
v′2 = 2·1/(1 + 2)·3 = 2 m/s

Answer

v′1 = −1 m/s

The minus sign means the first glider bounces back.

12.Momentum & collisions

Answer: J = 13 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.5·(15 + 11) = 13 N·s

Answer

J = 13 N·s
13.Rigid-body rotation

Answer: N = 288.8 rev

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1900/60 = 199 rad/s

Work of the brake equals the kinetic energy

½·I·ω² = ½·11·199² = 217734 J
θ = 217734/120 = 1814 rad

Revolutions

N = θ/2π = 288.8 rev

Answer

N = 288.8 rev
14.Rigid-body rotation

Answer: ω = 7.296 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 5·sin 10° = 0.8682 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 1)
v = √(2·9.81·0.8682/2) = 2.918 m/s
ω = v/r = 2.918/0.4 = 7.296 rad/s

Answer

ω = 7.296 rad/s
15.Gears & gear trains

Answer: P = 7.069 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 9.817 m/s

Power

P = (1200 − 480)·9.817 = 7069 W = 7.069 kW

Answer

P = 7.069 kW
16.Gears & gear trains

Answer: P = 2.181 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.941 rad

Slack-side tension

eμθ = e1.029 = 2.799, T₂ = 600/2.799 = 214.3 N

Power

P = (600 − 214.3)·5.655 = 2.181 kW

Answer

P = 2.181 kW
17.Springs & pendulums

Answer: T = 1.554 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(0.6/9.81) = 1.554 s

Answer

T = 1.554 s
18.Springs & pendulums

Answer: vmax = 1.153 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 2.9·9.81/210 = 0.1355 m = A

Greatest speed

The speed is largest at equilibrium.

ω = √(210/2.9) = 8.51 rad/s
vmax = A·ω = 0.1355·8.51 = 1.153 m/s

Answer

vmax = 1.153 m/s
19.Mechanical vibrations

Answer: fd = 2.479 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(40000/150) = 16.33 rad/s
fn = 16.33/(2π) = 2.599 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 2.599·√(1 − 0.3²) = 2.479 Hz

Answer

fd = 2.479 Hz
20.Mechanical vibrations

Answer: keq = 6 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/10 + 1/15 → keq = 10·15/(10 + 15) = 6 kN/m

Answer

keq = 6 kN/m

ExamProblems · examproblems.com/courses/dynamics