Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 3.5 m/s²car29 m/s

A car speeding at a constant 29 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3.5 m/s². How long does it take the police car to catch up? Find t.

vcar = 29 m/sapolice = 3.5 m/s²v0,police = 0
t = s
2.KinematicsHard
v₀ = 13 m/s40 m

A ball is thrown straight up at 13 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 13 m/sh₀ = 40 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 35°a = ?m = 5 kg

A 5 kg block slides down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 5 kgθ = 35°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 4.5 kg5.5 kgθ = 35°

A 4.5 kg block on a ramp at 35° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 5.5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.15. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 4.5 kgm2 = 5.5 kgθ = 35°μ = 0.15g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = ?65°R = 95 m

A ball is launched from level ground at 65° above the horizontal and lands 95 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 65°R = 95 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 50 mv0​ = 26 m/s60°H = ?

A ball is launched at 26 m/s and 60° above the horizontal from the top of a 50 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 26 m/sθ = 60°h = 50 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 145 mvmax​ = ?

A car takes a flat curve of radius 145 m. The coefficient of static friction between tyres and road is 0.8. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 145 mμs = 0.8g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1 mv = ?

A ball on a string 1 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 1 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
25°d = 10 mμ = 0.25

A block slides from rest down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.25. Find its speed v after it has slid 10 m along the slope.

θ = 25°μ = 0.25d = 10 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 4.5 mL = 2.5 mμ = 0.15k = 1500 N/m

A 0.5 kg block is released from rest at height 4.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2.5 m long (μ = 0.15) and then runs onto a spring (k = 1500 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 0.5 kgh = 4.5 mL = 2.5 mμ = 0.15k = 1500 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
1200 kg5 m/s1400 kg

A 1200 kg car moving at 5 m/s runs into a stationary 1400 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?

m1 = 1200 kgv1 = 5 m/sm2 = 1400 kgv2 = 0
ΔK/K = %
12.Momentum & collisionsHard
13 m/s14 m/s

A 0.3 kg ball hits a wall at 13 m/s and bounces straight back at 14 m/s. The contact lasts 25 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.3 kgvin = 13 m/svout = 14 m/sΔt = 25 ms
J = N·s
13.Rigid-body rotationMedium
L = 1.7 mm = 3 kgα

A uniform slender rod of mass 3 kg and length 1.7 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the acceleration atip of the free end just after release.

m = 3 kgL = 1.7 mg = 9.81 m/s²
atip = m/s²
14.Rigid-body rotationHard
180 m/s25 g1.8 mL = 2 m1.5 kg

A uniform slender rod of mass 1.5 kg and length 2 m hangs at rest from a frictionless pivot at its top end. A 25 g bullet moving horizontally at 180 m/s hits the rod 1.8 m below the pivot and stays embedded. Find the angular velocity ω of the rod just after the impact.

M = 1.5 kgL = 2 mm = 25 gv = 180 m/sd = 1.8 m
ω = rad/s
15.Gears & gear trainsMedium
N1​N2​ = ?

Two parallel shafts are 180 mm apart. They must be connected by a pair of spur gears with a module of 5 mm and a speed reduction of 2 : 1. How many teeth N2 must the gear have?

a = 180 mmm = 5 mmi = 2
N2 =
16.Gears & gear trainsHard
d1​ = 150 mmd2​ = 315 mm1500 rpmC = 500 mmT1​ = 2000 NT2​P = ?

An open belt connects a 150 mm driving pulley at 1500 rpm to a 315 mm pulley; the centres are 500 mm apart. The coefficient of friction is 0.3 and the tight-side tension may not exceed 2000 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 150 mmn1 = 1500 rpmd2 = 315 mmC = 500 mmμ = 0.3T1 = 2000 N
P = kW
17.Springs & pendulumsMedium
L = 1.7 m

A simple pendulum has a length of 1.7 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 1.7 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
1.5 kgk = 310 N/mA = 16 cm

A 1.5 kg mass on a spring with k = 310 N/m is pulled 16 cm from equilibrium and released. Find its maximum speed vmax.

m = 1.5 kgk = 310 N/mA = 16 cm
vmax = m/s
19.Mechanical vibrationsMedium
tx25 mm2 cycles3.7 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 25 mm is followed 2 cycles later by a peak of 3.7 mm. Find the damping ratio ζ.

x0 = 25 mmx2 = 3.7 mmn = 2
ζ =
20.Mechanical vibrationsHard
k1​ = 30k2​ = 15m = 40 kg

A 40 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 30 kN/m and the lower one k₂ = 15 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 30 kN/mk2 = 15 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 16.57 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·29/3.5 = 16.57 s

Answer

t = 16.57 s

At that moment the police car moves at 2v = 58 m/s.

2.Kinematics

Answer: hmax = 48.61 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 13²/(2·9.81) = 8.614 m

Height above the ground

hmax = 40 + 8.614 = 48.61 m

Answer

hmax = 48.61 m
3.Newton’s laws

Answer: a = 3.216 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 35° − 0.3·cos 35°) = 9.81·(0.5736 − 0.2457) = 3.216 m/s²

Answer

a = 3.216 m/s²
4.Newton’s laws

Answer: a = 2.321 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 53.96 N
m₁·g·sin θ = 25.32 N
μ·m₁·g·cos θ = 5.424 N

Acceleration of the system

a = (53.96 − 25.32 − 5.424)/10 = 2.321 m/s²

Answer

a = 2.321 m/s²
5.Projectile motion

Answer: v0 = 34.88 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·95/sin 130°) = 34.88 m/s

Answer

v0 = 34.88 m/s
6.Projectile motion

Answer: H = 75.84 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 26·sin 60° = 22.52 m/s

Rise above the cliff

Δh = vy²/(2g) = 22.52²/(2·9.81) = 25.84 m

Height above the ground

H = 50 + 25.84 = 75.84 m

Answer

H = 75.84 m
7.Circular motion

Answer: vmax = 33.73 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.8·9.81·145) = 33.73 m/s

Answer

vmax = 33.73 m/s (121.4 km/h)
8.Circular motion

Answer: vmin = 3.132 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·1) = 3.132 m/s

Answer

vmin = 3.132 m/s
9.Work & energy

Answer: v = 6.202 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·10·(0.4226 − 0.25·0.9063)) = 6.202 m/s

Answer

v = 6.202 m/s
10.Work & energy

Answer: x = 16.42 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 4.905·(4.5 − 0.15·2.5) = 20.23 J

Maximum compression

½kx² = 20.23 → x = √(2·20.23/1500) = 0.1642 m = 16.42 cm

Answer

x = 16.42 cm
11.Momentum & collisions

Answer: ΔK/K = 53.85 %

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1200·5/2600 = 2.308 m/s

Kinetic energy before and after

Kbefore = ½·1200·5² = 15000 J
Kafter = ½·2600·2.308² = 6923 J

Fraction lost

ΔK/K = 8077/15000 = 53.85 %

Answer

ΔK/K = 53.85 %

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: J = 8.1 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.3·(14 + 13) = 8.1 N·s

Answer

J = 8.1 N·s
13.Rigid-body rotation

Answer: atip = 14.71 m/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·1.7) = 8.656 rad/s²

Acceleration of the free end

atip = α·L = 8.656·1.7 = 14.71 m/s²

Answer

atip = 14.71 m/s²

atip = 1.5·g for any length: the free end falls faster than a dropped stone.

14.Rigid-body rotation

Answer: ω = 3.892 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 1.5·2²/3 + 0.025·1.8² = 2.081 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.025·180·1.8/2.081 = 3.892 rad/s

Answer

ω = 3.892 rad/s
15.Gears & gear trains

Answer: N2 = 48

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·180/5 = 72

Split by the ratio

N1 = 72/(1 + 2) = 24
N2 = 2·24 = 48

Answer

N2 = 48
16.Gears & gear trains

Answer: P = 13.42 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.81 rad

Slack-side tension

eμθ = e0.843 = 2.323, T₂ = 2000/2.323 = 860.8 N

Power

P = (2000 − 860.8)·11.78 = 13.42 kW

Answer

P = 13.42 kW
17.Springs & pendulums

Answer: T = 2.616 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(1.7/9.81) = 2.616 s

Answer

T = 2.616 s
18.Springs & pendulums

Answer: vmax = 2.3 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(310/1.5) = 14.38 rad/s

Maximum speed

vmax = A·ω = 0.16·14.38 = 2.3 m/s

Answer

vmax = 2.3 m/s
19.Mechanical vibrations

Answer: ζ = 0.1503

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/2)·ln(25/3.7) = 0.9553

Damping ratio

ζ = δ/√(4π² + δ²) = 0.9553/√(39.48 + 0.9125) = 0.1503

Answer

ζ = 0.1503
20.Mechanical vibrations

Answer: fn = 2.516 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/30 + 1/15 → keq = 30·15/(30 + 15) = 10 kN/m

Natural frequency

ωn = √(10000/40) = 15.81 rad/s
fn = 15.81/(2π) = 2.516 Hz

Answer

fn = 2.516 Hz

ExamProblems · examproblems.com/courses/dynamics