Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)2.222 s10

A car driving at 36 km/h brakes with a constant deceleration of 4.5 m/s² until it stops. Find the braking distance s.

v₀ = 36 km/ha = −4.5 m/s²v = 0
s = m
2.KinematicsHard
AB: 17 m/s50 m

Ball A is dropped from rest from a height of 50 m. At the same instant ball B is thrown straight up from the ground directly below at 17 m/s. Ignore air resistance and use g = 9.81 m/s². At what height y above the ground do they meet?

H = 50 mv0B = 17 m/sg = 9.81 m/s²
y = m
3.Newton’s lawsMedium
θ = 40°a = ?m = 15 kg

A 15 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 15 kgθ = 40°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
1 kg2 kgTF = 95 Nμ = 0.15

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 95 N pulls the front 2 kg block; the 1 kg block is towed behind. The coefficient of kinetic friction is 0.15 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.

m1 = 1 kgm2 = 2 kgF = 95 Nμ = 0.15g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 26 m/sθ = ?R = 35 m

A ball is launched from level ground at 26 m/s and must land 35 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 26 m/sR = 35 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 45 mv0​ = 32 m/s35°x = ?

A ball is launched at 35° above horizontal from the top of a 45 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 32 m/sθ = 35°h = 45 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 2.7 mω = ?

In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 2.7 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.4. Use g = 9.81 m/s². Find the smallest angular speed ω in rad/s.

r = 2.7 mμs = 0.4g = 9.81 m/s²
ω = rad/s
8.Circular motionHard
r = 1 m7.5 m/svtop​ = ?

A 0.6 kg ball on a light string 1 m long is swung in a vertical circle. At the lowest point its speed is 7.5 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 0.6 kgr = 1 mvbottom = 7.5 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
45°d = 20 mμ = 0.1

A block slides from rest down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.1. Find its speed v after it has slid 20 m along the slope.

θ = 45°μ = 0.1d = 20 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 6.4 mR = 2 mN = ?

A 0.5 kg cart is released from rest at a height of 6.4 m on a smooth track that leads into a vertical circular loop of radius 2 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 0.5 kgh = 6.4 mR = 2 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
1 kg10 m/s4.5 kg

A 1 kg glider moving at 10 m/s makes a perfectly elastic head-on collision with a 4.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 1 kgm2 = 4.5 kgv1 = 10 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
1400 kg14 m/s1100 kg13 m/sv′ = ?

At a crossing a 1400 kg car travelling east at 14 m/s collides with a 1100 kg car travelling north at 13 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.

m1 = 1400 kgv1 = 14 m/s (E)m2 = 1100 kgv2 = 13 m/s (N)
v′ = m/s
13.Rigid-body rotationMedium
n = 800 rpmTb​ = 65 N·mI = 5.5 kg·m²

A flywheel with a moment of inertia of 5.5 kg·m² spins at 800 rpm. A brake applies a constant friction torque of 65 N·m. How long t does it take to stop?

I = 5.5 kg·m²n = 800 rpmTb = 65 N·m
t = s
14.Rigid-body rotationHard
0.65 m0.2 mn1​ = 45 rpm

A person stands on a frictionless turntable and holds a 1.5 kg dumbbell in each hand, 0.65 m from the axis. The person and turntable alone have a moment of inertia of 2 kg·m² about the axis. They turn at 45 rpm, then pull the dumbbells in to 0.2 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.

I0 = 2 kg·m²m = 2 × 1.5 kgr1 = 0.65 mr2 = 0.2 mn1 = 45 rpm
n2 = rpm
15.Gears & gear trainsMedium
N1​ = 32N2​ = 48

A 2.2 kW motor running at 1440 rpm drives a pinion with 32 teeth, which meshes with a gear with 48 teeth. The gear pair has an efficiency of 96%. Find the torque T1 on the motor shaft.

P = 2.2 kWn1 = 1440 rpmN1 = 32N2 = 48η = 96%
T1 = N·m
16.Gears & gear trainsHard
A = 24B = 32C = 18D = ?

In a compound gear train, gear A (24 teeth) on the input shaft turns at 1500 rpm and drives gear B (32 teeth). Gear C (18 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 337.5 rpm. How many teeth ND must gear D have?

nin = 1500 rpmA = 24B = 32C = 18nout = 337.5 rpm
ND =
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 0.8 s? Use g = 9.81 m/s². Find L.

T = 0.8 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
3.4 kgk = 330 N/mA = 3 cm

A 3.4 kg mass on a spring with k = 330 N/m is pulled 3 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 3.4 kgk = 330 N/mA = 3 cm
E = J
19.Mechanical vibrationsMedium
k = 40 kN/mζ = 0.5m = 2 kg

A 2 kg mass on a spring with a stiffness of 40 kN/m has a viscous damper giving a damping ratio of 0.5. Find the damped natural frequency fd of its free vibration in Hz.

m = 2 kgk = 40 kN/mζ = 0.5
fd = Hz
20.Mechanical vibrationsHard
k1​ = 60k2​ = 25m = 10 kg

A 10 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 60 kN/m and the lower one k₂ = 25 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 10 kgk1 = 60 kN/mk2 = 25 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 11.11 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 36/3.6 = 10 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 10²/(2·4.5) = 11.11 m

Answer

s = 11.11 m
2.Kinematics

Answer: y = 7.569 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Meeting time

Up is positive, the ground is y = 0.

50 − ½g·t² = 17·t − ½g·t² → t = 50/17 = 2.941 s

Meeting height

y = 17·2.941 − ½·9.81·2.941² = 7.569 m

Answer

y = 7.569 m
3.Newton’s laws

Answer: a = 5.179 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 40° − 0.15·cos 40°) = 9.81·(0.6428 − 0.1149) = 5.179 m/s²

Answer

a = 5.179 m/s²
4.Newton’s laws

Answer: a = 30.2 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (95 − 4.414)/3 = 30.2 m/s²

Answer

a = 30.2 m/s²
5.Projectile motion

Answer: θ = 15.26 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·35/26² = 0.5079

Angle

2θ = 30.52° → θ = 15.26°

Answer

θ = 15.26°

The other solution is 90° − θ = 74.74°.

6.Projectile motion

Answer: x = 142.4 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 32·cos 35° = 26.21 m/s
vy = v0·sin θ = 32·sin 35° = 18.35 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 45 + 18.35·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (18.35 + √(336.9 + 882.9))/9.81 = 5.431 s

Horizontal distance

x = vx·t = 26.21·5.431 = 142.4 m

Answer

x = 142.4 m
7.Circular motion

Answer: ω = 3.014 rad/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces on a rider

N = m·ω²·r
μ·N = m·g → μ·ω²·r = g

Angular speed

ω = √(g/(μ·r)) = √(9.81/(0.4·2.7)) = 3.014 rad/s

Answer

ω = 3.014 rad/s
8.Circular motion

Answer: Ttop = 4.32 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 7.5² − 4·9.81·1 = 17.01 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 0.6·17.01/1 − 0.6·9.81 = 4.32 N

Answer

Ttop = 4.32 N
9.Work & energy

Answer: v = 15.8 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·20·(0.7071 − 0.1·0.7071)) = 15.8 m/s

Answer

v = 15.8 m/s
10.Work & energy

Answer: N = 6.867 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(6.4 − 4) = 47.09 m²/s²

Forces at the top

m·g = 0.5·9.81 = 4.905 N
N = mv²/R − mg = 0.5·47.09/2 − 4.905 = 6.867 N

Answer

N = 6.867 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′1 = −6.364 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (1 − 4.5)/(1 + 4.5)·10 = −6.364 m/s
v′2 = 2·1/(1 + 4.5)·10 = 3.636 m/s

Answer

v′1 = −6.364 m/s

The minus sign means the first glider bounces back.

12.Momentum & collisions

Answer: v′ = 9.705 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1400·14 = 19600 kg·m/s
py = 1100·13 = 14300 kg·m/s

Speed of the wreck

v′ = √(px² + py²)/(m1 + m2) = 24262/2500 = 9.705 m/s

Answer

v′ = 9.705 m/s
13.Rigid-body rotation

Answer: t = 7.089 s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·800/60 = 83.78 rad/s

Deceleration and time

α = Tb/I = 65/5.5 = 11.82 rad/s²
t = ω/α = 83.78/11.82 = 7.089 s

Answer

t = 7.089 s
14.Rigid-body rotation

Answer: n2 = 69.36 rpm

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = 2 + 2·1.5·0.65² = 3.268 kg·m²
I2 = 2 + 2·1.5·0.2² = 2.12 kg·m²

Conservation of angular momentum

n2 = n1·I1/I2 = 45·3.268/2.12 = 69.36 rpm

Answer

n2 = 69.36 rpm

The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.

15.Gears & gear trains

Answer: T1 = 14.59 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1440/60 = 150.8 rad/s
T1 = P/ω₁ = 2200/150.8 = 14.59 N·m

Answer

T1 = 14.59 N·m
16.Gears & gear trains

Answer: ND = 60

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 1500·24/32 = 1125 rpm

Teeth on gear D

ND = C·nC/nout = 18·1125/337.5 = 60

Answer

ND = 60
17.Springs & pendulums

Answer: L = 0.159 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(0.8/2π)² = 0.159 m

Answer

L = 0.159 m
18.Springs & pendulums

Answer: E = 0.1485 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(330/3.4) = 9.852 rad/s

Energy

E = ½·k·A² = ½·330·0.03² = 0.1485 J

Answer

E = 0.1485 J
19.Mechanical vibrations

Answer: fd = 19.49 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(40000/2) = 141.4 rad/s
fn = 141.4/(2π) = 22.51 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 22.51·√(1 − 0.5²) = 19.49 Hz

Answer

fd = 19.49 Hz
20.Mechanical vibrations

Answer: fn = 6.686 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/60 + 1/25 → keq = 60·25/(60 + 25) = 17.65 kN/m

Natural frequency

ωn = √(17647/10) = 42.01 rad/s
fn = 42.01/(2π) = 6.686 Hz

Answer

fn = 6.686 Hz

ExamProblems · examproblems.com/courses/dynamics