In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A driver moving at 50 km/h sees an obstacle. Her reaction time is 0.5 s, after which the car brakes with a constant deceleration of 5 m/s². Find the total stopping distance d from the moment she sees the obstacle.
v₀ = 50 km/htr = 0.5 sa = −5 m/s²
d = m
2.KinematicsHard
A ball is thrown straight up at 11 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.
v₀ = 11 m/sh₀ = 5 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 35 kg sled is pulled across level snow by a rope at 25° above the horizontal with a force of 190 N. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the sled.
m = 35 kgF = 190 Nθ = 25°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 6 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3.5 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 6 kgm2 = 3.5 kgμ = 0g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 60° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 18 m/sθ = 60°g = 9.81 m/s²
t = s
6.Projectile motionHard
A ball is launched at 25° above horizontal from the top of a 10 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 29 m/sθ = 25°h = 10 mg = 9.81 m/s²
t = s
7.Circular motionMedium
In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 3.1 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.6. Use g = 9.81 m/s². Find the smallest angular speed ω in rad/s.
r = 3.1 mμs = 0.6g = 9.81 m/s²
ω = rad/s
8.Circular motionHard
A 1 kg cart is released from rest at a height of 2.2 m on a frictionless track and runs through a vertical loop of radius 0.5 m. Use g = 9.81 m/s². Find the normal force Nbottom of the track on the cart at the bottom of the loop.
m = 1 kgh = 2.2 mR = 0.5 mg = 9.81 m/s²
Nbottom = N
9.Work & energyMedium
An 800 kg car drives up a 6° slope at a constant 36 km/h. Air resistance and rolling resistance together amount to 750 N. Find the power P the wheels must deliver, in kW.
A 1 kg cart is released from rest at a height of 14 m on a smooth track that leads into a vertical circular loop of radius 5 m. Find the speed v of the cart at the top of the loop.
m = 1 kgh = 14 mR = 5 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
A 1 kg glider moving at 12 m/s makes a perfectly elastic head-on collision with a 2.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 1 kgm2 = 2.5 kgv1 = 12 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
A 15 g bullet is fired horizontally into a 3 kg block hanging from light strings 0.6 m long, and stays in it. The strings swing out to a largest angle of 30° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 15 gM = 3 kgL = 0.6 mθ = 30°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
A motor delivers a torque of 1840 N·m at 1300 rpm. Find its power output P in kW.
T = 1840 N·mn = 1300 rpm
P = kW
14.Rigid-body rotationHard
A solid sphere starts from rest and rolls without slipping down a slope inclined at 40° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 8.5 m along the slope.
θ = 40°s = 8.5 mI = (2/5)·m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
A 1.1 kW motor running at 2900 rpm drives a pinion with 16 teeth and a module of 3 mm. Find the tangential force Ft on the pinion teeth.
P = 1.1 kWn = 2900 rpmN1 = 16m = 3 mm
Ft = N
16.Gears & gear trainsHard
In a compound gear train, gear A (30 teeth) on the input shaft turning at 1500 rpm drives gear B (40 teeth). Gear C (20 teeth) is fixed to the same shaft as B and drives gear D (80 teeth) on the output shaft. Find the output speed nout.
nin = 1500 rpmA = 30B = 40C = 20D = 80
nout = rpm
17.Springs & pendulumsMedium
A simple pendulum has a length of 1.8 m. Use g = 9.81 m/s². Find its period T for small swings.
L = 1.8 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
A mass on a spring with k = 70 N/m oscillates on a frictionless surface with an amplitude of 17 cm. Find its kinetic energy K when it is 4 cm from equilibrium.
k = 70 N/mA = 17 cmx = 4 cm
K = J
19.Mechanical vibrationsMedium
A 40 kg mass on a spring with a stiffness of 200 kN/m has a viscous damper giving a damping ratio of 0.7. Find the damped natural frequency fd of its free vibration in Hz.
m = 40 kgk = 200 kN/mζ = 0.7
fd = Hz
20.Mechanical vibrationsHard
A 20 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 10 kN/m and k₂ = 80 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.
m = 20 kgk1 = 10 kN/mk2 = 80 kN/m
keq = kN/m
3Solutions
1.Kinematics
Answer: d = 26.23 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 50/3.6 = 13.89 m/s
Reaction distance
d1 = v₀·tr = 13.89·0.5 = 6.944 m
Braking distance
d2 = v₀²/(2a) = 13.89²/(2·5) = 19.29 m
Total
d = 6.944 + 19.29 = 26.23 m
Answer
d = 26.23 m
2.Kinematics
Answer: hmax = 11.17 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Rise above the roof
0 = v₀² − 2·g·Δh → Δh = 11²/(2·9.81) = 6.167 m
Height above the ground
hmax = 5 + 6.167 = 11.17 m
Answer
hmax = 11.17 m
3.Newton’s laws
Answer: a = 3.417 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Normal force
N = m·g − F·sin θ = 343.4 − 190·sin 25° = 263.1 N
Horizontal forces
m·a = F·cos θ − μ·N = 172.2 − 52.61
a = 119.6/35 = 3.417 m/s²
Answer
a = 3.417 m/s²
4.Newton’s laws
Answer: T = 21.69 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 18·cos 60° = 9 m/s
vy = v0·sin θ = 18·sin 60° = 15.59 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·15.59/9.81 = 3.178 s
Answer
t = 3.178 s
6.Projectile motion
Answer: t = 3.147 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 29·cos 25° = 26.28 m/s
vy = v0·sin θ = 29·sin 25° = 12.26 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 10 + 12.26·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (12.26 + √(150.2 + 196.2))/9.81 = 3.147 s
Answer
t = 3.147 s
7.Circular motion
Answer: ω = 2.297 rad/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces on a rider
N = m·ω²·r
μ·N = m·g → μ·ω²·r = g
Angular speed
ω = √(g/(μ·r)) = √(9.81/(0.6·3.1)) = 2.297 rad/s
Answer
ω = 2.297 rad/s
8.Circular motion
Answer: Nbottom = 96.14 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Speed from energy conservation
v² = 2·9.81·2.2 = 43.16 m²/s²
Forces
Towards the centre is positive.
N = m·v²/R + m·g = 1·43.16/0.5 + 9.81 = 96.14 N
Answer
Nbottom = 96.14 N
9.Work & energy
Answer: P = 15.7 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 800·9.81 = 7848 N
mg·sin θ = 7848·sin 6° = 820.3 N
F = 820.3 + 750 = 1570 N
Power
v = 36/3.6 = 10 m/s
P = F·v = 1570·10 = 15703 W = 15.7 kW
Answer
P = 15.7 kW
10.Work & energy
Answer: v = 8.859 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(14 − 10) = 78.48 m²/s²
v = 8.859 m/s
Answer
v = 8.859 m/s
The cart just makes it round when h = 2.5R; then N = 0 at the top.
11.Momentum & collisions
Answer: v′2 = 6.857 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (1 − 2.5)/(1 + 2.5)·12 = −5.143 m/s
v′2 = 2·1/(1 + 2.5)·12 = 6.857 m/s
Answer
v′2 = 6.857 m/s
12.Momentum & collisions
Answer: v = 252.4 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 0.6·(1 − cos 30°) = 0.08038 m
Speed after impact
V = √(2·9.81·0.08038) = 1.256 m/s
Collision
v = (m + M)·V/m = 3.015·1.256/0.015 = 252.4 m/s
Answer
v = 252.4 m/s
13.Rigid-body rotation
Answer: P = 250.5 kW
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·1300/60 = 136.1 rad/s
Power
P = T·ω = 1840·136.1 = 250490 W = 250.5 kW
Answer
P = 250.5 kW
14.Rigid-body rotation
Answer: v = 8.75 m/s
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Height dropped
h = s·sin θ = 8.5·sin 40° = 5.464 m
Energy balance with rolling
Rolling without slipping: ω = v/r, and friction does no work at the contact point.
m·g·h = ½·m·v²·(1 + 0.4)
v = √(2·9.81·5.464/1.4) = 8.75 m/s
Answer
v = 8.75 m/s
15.Gears & gear trains
Answer: Ft = 150.9 N
Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.
Torque on the pinion
ω = 2π·2900/60 = 303.7 rad/s
T = P/ω = 1100/303.7 = 3.622 N·m
Pitch diameter
d = m·N = 3·16 = 48 mm
Tangential force
Ft = 2T/d = 2·3.622/0.048 = 150.9 N
Answer
Ft = 150.9 N
16.Gears & gear trains
Answer: nout = 281.3 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
First stage
nB = 1500·30/40 = 1125 rpm = nC
Second stage
nout = 1125·20/80 = 281.3 rpm
Answer
nout = 281.3 rpm
total ratio = 5.333 : 1
17.Springs & pendulums
Answer: T = 2.691 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Pendulum period
T = 2π·√(1.8/9.81) = 2.691 s
Answer
T = 2.691 s
18.Springs & pendulums
Answer: K = 0.9555 J
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Total energy
E = ½·k·A² = ½·70·0.17² = 1.012 J
Spring energy at x
U = ½·k·x² = ½·70·0.04² = 0.056 J
Kinetic energy
K = 1.012 − 0.056 = 0.9555 J
Answer
K = 0.9555 J
19.Mechanical vibrations
Answer: fd = 8.037 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(200000/40) = 70.71 rad/s
fn = 70.71/(2π) = 11.25 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 11.25·√(1 − 0.7²) = 8.037 Hz
Answer
fd = 8.037 Hz
20.Mechanical vibrations
Answer: keq = 90 kN/m
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.