Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 3.5 m/s²car19 m/s

A car speeding at a constant 19 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3.5 m/s². How long does it take the police car to catch up? Find t.

vcar = 19 m/sapolice = 3.5 m/s²v0,police = 0
t = s
2.KinematicsHard
v₀ = 7 m/s30 m

A ball is thrown straight up at 7 m/s from the edge of a roof 30 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 7 m/sh₀ = 30 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 40°a = ?m = 20 kg

A 20 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 20 kgθ = 40°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 35°blockv₀ = 3.5 m/s

A block is given a push so that it starts sliding up a ramp at 35° with a speed of 3.5 m/s. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 3.5 m/sθ = 35°μ = 0.1g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 28 m/s40°x = ?

A ball is launched at 40° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 28 m/sθ = 40°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 35 mv0​ = 29 m/s65°H = ?

A ball is launched at 29 m/s and 65° above the horizontal from the top of a 35 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 29 m/sθ = 65°h = 35 mg = 9.81 m/s²
H = m
7.Circular motionMedium
L = 0.7 m25°

A small ball on a string of length 0.7 m moves in a horizontal circle so that the string makes a constant angle of 25° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the time T for one revolution.

L = 0.7 mθ = 25°g = 9.81 m/s²
T = s
8.Circular motionHard
r = 0.9 mv = ?

A ball on a string 0.9 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 0.9 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
25°d = 17 mμ = 0.25

A block slides from rest down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.25. Find its speed v after it has slid 17 m along the slope.

θ = 25°μ = 0.25d = 17 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 5 mL = 3.5 mμ = 0.25k = 800 N/m

A 2.5 kg block is released from rest at height 5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3.5 m long (μ = 0.25) and then runs onto a spring (k = 800 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 2.5 kgh = 5 mL = 3.5 mμ = 0.25k = 800 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
3 kgv = ?5 gh = 6 cm

A 5 g bullet is fired horizontally into a 3 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 6 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 5 gM = 3 kgh = 6 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
12 m/s16 m/s

A 0.2 kg ball hits a wall at 12 m/s and bounces straight back at 16 m/s. The contact lasts 10 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.2 kgvin = 12 m/svout = 16 m/sΔt = 10 ms
J = N·s
13.Rigid-body rotationMedium
6.5 kgaαM = 9 kgR = 0.1 m

A 6.5 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 9 kg and radius 0.1 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the acceleration a of the block.

m = 6.5 kgM = 9 kgR = 0.1 mg = 9.81 m/s²
a = m/s²
14.Rigid-body rotationHard
200 m/s50 g0.69 mL = 1.1 m7 kg

A uniform slender rod of mass 7 kg and length 1.1 m hangs at rest from a frictionless pivot at its top end. A 50 g bullet moving horizontally at 200 m/s hits the rod 0.69 m below the pivot and stays embedded. Find the angular velocity ω of the rod just after the impact.

M = 7 kgL = 1.1 mm = 50 gv = 200 m/sd = 0.69 m
ω = rad/s
15.Gears & gear trainsMedium
N1​ = 16N2​ = 20

An 11 kW motor running at 1440 rpm drives a pinion with 16 teeth, which meshes with a gear with 20 teeth. The gear pair has an efficiency of 97%. Find the output torque T2 on the gear shaft.

P = 11 kWn1 = 1440 rpmN1 = 16N2 = 20η = 97%
T2 = N·m
16.Gears & gear trainsHard
d1​ = 100 mmd2​ = 450 mm1450 rpmC = 500 mmT1​ = 800 NT2​P = ?

An open belt connects a 100 mm driving pulley at 1450 rpm to a 450 mm pulley; the centres are 500 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 800 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 100 mmn1 = 1450 rpmd2 = 450 mmC = 500 mmμ = 0.25T1 = 800 N
P = kW
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 1.3 s? Use g = 9.81 m/s². Find L.

T = 1.3 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
t (s)x (cm)t = ?5.1

A body oscillates in simple harmonic motion with period 2.8 s and amplitude 17 cm. What is the shortest time t it needs to move from its maximum displacement of 17 cm to a displacement of 5.1 cm?

T = 2.8 sA = 17 cmx = 5.1 cm
t = s
19.Mechanical vibrationsMedium
k = 12 kN/mζ = 0.6m = 100 kg

A 100 kg mass on a spring with a stiffness of 12 kN/m has a viscous damper giving a damping ratio of 0.6. Find the damped natural frequency fd of its free vibration in Hz.

m = 100 kgk = 12 kN/mζ = 0.6
fd = Hz
20.Mechanical vibrationsHard
k1​ = 25k2​ = 10m = 40 kg

A 40 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 25 kN/m and the lower one k₂ = 10 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 40 kgk1 = 25 kN/mk2 = 10 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: t = 10.86 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·19/3.5 = 10.86 s

Answer

t = 10.86 s

At that moment the police car moves at 2v = 38 m/s.

2.Kinematics

Answer: t = 3.288 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−30 = 7·t − ½·9.81·t²
4.905·t² − 7·t − 30 = 0

Solve the quadratic

Only the positive root is physical.

t = (7 + √(7² + 2·9.81·30))/9.81 = 3.288 s

Answer

t = 3.288 s
3.Newton’s laws

Answer: a = 4.803 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 40° − 0.2·cos 40°) = 9.81·(0.6428 − 0.1532) = 4.803 m/s²

Answer

a = 4.803 m/s²
4.Newton’s laws

Answer: d = 0.9525 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 35° + 0.1·cos 35°) = 6.43 m/s²

Distance

d = v₀²/(2a) = 3.5²/(2·6.43) = 0.9525 m

Answer

d = 0.9525 m
5.Projectile motion

Answer: x = 78.7 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 28·cos 40° = 21.45 m/s
vy = v0·sin θ = 28·sin 40° = 18 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·18/9.81 = 3.669 s

Horizontal distance

x = vx·t = 21.45·3.669 = 78.7 m

Answer

x = 78.7 m
6.Projectile motion

Answer: H = 70.21 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 29·sin 65° = 26.28 m/s

Rise above the cliff

Δh = vy²/(2g) = 26.28²/(2·9.81) = 35.21 m

Height above the ground

H = 35 + 35.21 = 70.21 m

Answer

H = 70.21 m
7.Circular motion

Answer: T = 1.598 s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Radius of the circle

r = L·sin θ = 0.7·sin 25° = 0.2958 m

Speed

Tension and gravity together give the inward force: tan θ = v²/(r·g).

v = √(r·g·tan θ) = √(0.2958·9.81·tan 25°) = 1.163 m/s

Period

T = 2π·r/v = 2π·0.2958/1.163 = 1.598 s

Answer

T = 1.598 s
8.Circular motion

Answer: vmin = 2.971 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·0.9) = 2.971 m/s

Answer

vmin = 2.971 m/s
9.Work & energy

Answer: v = 8.086 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·17·(0.4226 − 0.25·0.9063)) = 8.086 m/s

Answer

v = 8.086 m/s
10.Work & energy

Answer: x = 50.29 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 24.53·(5 − 0.25·3.5) = 101.2 J

Maximum compression

½kx² = 101.2 → x = √(2·101.2/800) = 0.5029 m = 50.29 cm

Answer

x = 50.29 cm
11.Momentum & collisions

Answer: v = 652.1 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.06) = 1.085 m/s

Collision

m·v = (m + M)·V → v = (0.005 + 3)·1.085/0.005 = 652.1 m/s

Answer

v = 652.1 m/s
12.Momentum & collisions

Answer: J = 5.6 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.2·(16 + 12) = 5.6 N·s

Answer

J = 5.6 N·s
13.Rigid-body rotation

Answer: a = 5.797 m/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Block and pulley

block: m·g − T = m·a
pulley: T·R = I·α = ½·M·R²·(a/R) → T = ½·M·a

Acceleration

a = m·g/(m + M/2) = 6.5·9.81/(6.5 + 4.5) = 5.797 m/s²

Answer

a = 5.797 m/s²
14.Rigid-body rotation

Answer: ω = 2.423 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 7·1.1²/3 + 0.05·0.69² = 2.847 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.05·200·0.69/2.847 = 2.423 rad/s

Answer

ω = 2.423 rad/s
15.Gears & gear trains

Answer: T2 = 88.45 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1440/60 = 150.8 rad/s
T1 = P/ω₁ = 11000/150.8 = 72.95 N·m

Output torque

T2 = 72.95·20/16·0.97 = 88.45 N·m

Answer

T2 = 88.45 N·m
16.Gears & gear trains

Answer: P = 2.762 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.426 rad

Slack-side tension

eμθ = e0.6066 = 1.834, T₂ = 800/1.834 = 436.2 N

Power

P = (800 − 436.2)·7.592 = 2.762 kW

Answer

P = 2.762 kW
17.Springs & pendulums

Answer: L = 0.4199 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(1.3/2π)² = 0.4199 m

Answer

L = 0.4199 m
18.Springs & pendulums

Answer: t = 0.5642 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = 2π/T = 2π/2.8 = 2.244 rad/s

Solve for the time

0.3 = cos(ω·t) → ω·t = arccos(0.3) = 1.266 rad
t = 1.266/2.244 = 0.5642 s

Answer

t = 0.5642 s
19.Mechanical vibrations

Answer: fd = 1.395 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(12000/100) = 10.95 rad/s
fn = 10.95/(2π) = 1.743 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 1.743·√(1 − 0.6²) = 1.395 Hz

Answer

fd = 1.395 Hz
20.Mechanical vibrations

Answer: keq = 7.143 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/25 + 1/10 → keq = 25·10/(25 + 10) = 7.143 kN/m

Answer

keq = 7.143 kN/m

ExamProblems · examproblems.com/courses/dynamics